What's your pumping routine?

[Tubel]

I'd like to know everyone's typical routine when you pump. It took awhile to work out what works best for me and it's changed a few times. I'm still figuring out my ball pumping and full package routine but when I pump my cock this is what works best.

1. Get fully hard. That fills what I actually want to grow with fluid first and let's it get more of the initial stretch.

2. Lube, seal, cock ring, tube. Cock ring helps with staying hard without physical stimulation

3. First pump ~30 minutes. Usually I go up to 10 In Hg or a little more to start. I like the pressure feeling a lot. I maintain the pressure usually by feel at this point. Letting it slowly drop and pump back up in cycles seems to make everything progress faster.

4. Adjustment. By now my cock ring is slipping up the tube so I break the vacuum and slide it back down to the seal. Stroke for a bit to get fully hard and lube any more if necessary.

5. Second pump ~20 minutes. I'll maintain pressure around 5-7in By this time edema is starting. I start to fill the tube at the bottom and watch the sides start to fill out. Towards the end, my curve and growing donut can trap an air bubble so I release pressure and pump up again try getting it out. By the end I'm packing most of the tube except for trapped air pockets.

6. Final pumps ~10-20 minutes. Now I'm working on packing the full tube. I'll take the pump off and slip it back on each time trapping less air. Eventually the tube is fully packed.

Since I could pack the 2.5" tube I bought a 2.875" that I use for the next stage.

So what's you're routine?