Unpumped and pumped balls - please show
Moderator: bigray57
-
- Posts: 91
- Joined: Sun Jan 15, 2006 7:16 am
Unpumped and pumped balls - please show
Hello,
For those of you that have been ball pumping for at least a year, I would like to see how the balls look just after a pump and then how they look umpumped.
Also state what tube or tubes you have used.
Thanks,
Frypup
For those of you that have been ball pumping for at least a year, I would like to see how the balls look just after a pump and then how they look umpumped.
Also state what tube or tubes you have used.
Thanks,
Frypup
-
- Posts: 178
- Joined: Fri Oct 22, 2010 4:46 am
- greenie
- Posts: 756
- Joined: Fri Jun 17, 2005 1:30 pm
- Location: East Coast Australia
Re: Unpumped and pumped balls - please show
Fucking beautiful, so tasty looking, great job man
The bigger they are the harder I get.
- greenie
- Posts: 756
- Joined: Fri Jun 17, 2005 1:30 pm
- Location: East Coast Australia
- dasher
- Posts: 726
- Joined: Fri Sep 08, 2006 8:20 pm
- Location: Germany
Re: Unpumped and pumped balls - please show
unpumped and pumped with MT senior
- marklpool
- Posts: 56
- Joined: Tue Feb 26, 2008 11:55 pm
- Location: Liverpool UK
Re: Unpumped and pumped balls - please show
My before and after pumping pictures. Homemade pump using a Kilner jar, silicone pipe and pipe insulations to wrap round rim of the jar.
- greenie
- Posts: 756
- Joined: Fri Jun 17, 2005 1:30 pm
- Location: East Coast Australia
- greenie
- Posts: 756
- Joined: Fri Jun 17, 2005 1:30 pm
- Location: East Coast Australia
Re: Unpumped and pumped balls - please show
I would worship those balls with my mouth and tongue, your cock is beautiful too
The bigger they are the harder I get.
- marklpool
- Posts: 56
- Joined: Tue Feb 26, 2008 11:55 pm
- Location: Liverpool UK
Re: Unpumped and pumped balls - please show
- marklpool
- Posts: 56
- Joined: Tue Feb 26, 2008 11:55 pm
- Location: Liverpool UK
- marklpool
- Posts: 56
- Joined: Tue Feb 26, 2008 11:55 pm
- Location: Liverpool UK
Re: Unpumped and pumped balls - please show
Nice cock and balls before and after pumping
- marklpool
- Posts: 56
- Joined: Tue Feb 26, 2008 11:55 pm
- Location: Liverpool UK
- bignlow
- Posts: 3164
- Joined: Wed Jan 27, 2010 7:30 pm
- Location: Rochdale nr Manchester UK
Re: Unpumped and pumped balls - please show
From the archive to up to date.
Started with making narrow tubes and steadily went up the sizes, making them as they were needed.
Into the big ones.
Edit, some of the earlier pics are a bit big for the site these days, just click on them and they usually open up the right way up.
Into the weights for a while, the last 3 years or so due to a hernia, wearing them during and after.
Then back to the small tubes, firstly using a 70 mm balls only to keep the hernia site out of the tube.,
Then back to full package in the 70 nd an 80, both tubes 12"long
As i am now, especially if it's nice and warm .....
It works, just takes time ...
BnL
Started with making narrow tubes and steadily went up the sizes, making them as they were needed.
Into the big ones.
Edit, some of the earlier pics are a bit big for the site these days, just click on them and they usually open up the right way up.
Into the weights for a while, the last 3 years or so due to a hernia, wearing them during and after.
Then back to the small tubes, firstly using a 70 mm balls only to keep the hernia site out of the tube.,
Then back to full package in the 70 nd an 80, both tubes 12"long
As i am now, especially if it's nice and warm .....
It works, just takes time ...
BnL
- marklpool
- Posts: 56
- Joined: Tue Feb 26, 2008 11:55 pm
- Location: Liverpool UK
Re: Unpumped and pumped balls - please show
OMG great pumped balls. Love the weights you have attached to them too, and the amount of drop you've achievedbignlow wrote: ↑Sun Jun 30, 2024 1:22 am From the archive to up to date.
Started with making narrow tubes and steadily went up the sizes, making them as they were needed.
Into the big ones.
Edit, some of the earlier pics are a bit big for the site these days, just click on them and they usually open up the right way up.
1.jpg
2.jpg
3.jpg
4.jpg
Into the weights for a while, the last 3 years or so due to a hernia, wearing them during and after.
5.jpg
Then back to the small tubes, firstly using a 70 mm balls only to keep the hernia site out of the tube.,
6.jpg
Then back to full package in the 70 nd an 80, both tubes 12"long
7.jpg
As i am now, especially if it's nice and warm .....
8.jpg
9.jpg
10.jpg
It works, just takes time ...
BnL
- greenie
- Posts: 756
- Joined: Fri Jun 17, 2005 1:30 pm
- Location: East Coast Australia
Re: Unpumped and pumped balls - please show
Looked at the 3rd picture in this set and went and put my jar on, so sexy, I too have had a hernia so I use a bandage wrapped around, not too tight, I find that helps keep the site in check, sucks into jar but I don’t feel any niggles from repairbignlow wrote: ↑Sun Jun 30, 2024 1:22 am From the archive to up to date.
Started with making narrow tubes and steadily went up the sizes, making them as they were needed.
Into the big ones.
Edit, some of the earlier pics are a bit big for the site these days, just click on them and they usually open up the right way up.
1.jpg
2.jpg
3.jpg
4.jpg
Into the weights for a while, the last 3 years or so due to a hernia, wearing them during and after.
5.jpg
Then back to the small tubes, firstly using a 70 mm balls only to keep the hernia site out of the tube.,
6.jpg
Then back to full package in the 70 nd an 80, both tubes 12"long
7.jpg
As i am now, especially if it's nice and warm .....
8.jpg
9.jpg
10.jpg
It works, just takes time ...
BnL
The bigger they are the harder I get.