This was the first attempt ever...
...and my hands have been a little bit shaky
First time CO2
Moderator: bigray57
- Quax
- Posts: 104
- Joined: Thu Jul 26, 2018 2:57 pm
First time CO2
Last edited by Quax on Sat Jan 27, 2024 6:39 pm, edited 5 times in total.
"You can't wait until life isn't hard anymore before you decide to be happy" (Nightbirde - *12.29.1990 †02.19.2022)
-
- Posts: 36
- Joined: Mon Jan 03, 2022 8:40 am
Re: First time CO2
Nice one, how long does it last ?
- bgman30
- Posts: 68
- Joined: Sat Jan 05, 2008 11:24 am
Re: First time CO2
Looks good. What kind of connector did you use from the CO2 bike inflator to the tubing? I've had difficulty making that connection.
- Quax
- Posts: 104
- Joined: Thu Jul 26, 2018 2:57 pm
Re: First time CO2
I've simply reversed a connector from my bycicle pump:
To prevent a sudden 'blow up' due to the inaccurate justment of the inflator's regulator
there is no permanent connection from the inflator to the tubing.
I'm first openening the inflator to the volume I want to inflate and then only connect it as long as to inflate.
"You can't wait until life isn't hard anymore before you decide to be happy" (Nightbirde - *12.29.1990 †02.19.2022)
- Quax
- Posts: 104
- Joined: Thu Jul 26, 2018 2:57 pm
Re: First time CO2
Next round:
"You can't wait until life isn't hard anymore before you decide to be happy" (Nightbirde - *12.29.1990 †02.19.2022)
-
- Posts: 36
- Joined: Mon Jan 03, 2022 8:40 am
Re: First time CO2
What made you choose CO2 over N2O
- Quax
- Posts: 104
- Joined: Thu Jul 26, 2018 2:57 pm
Re: First time CO2
Hi,
I couldn't find any supplier for NO2 capsules with threaded heads.
With threaded capsules I can use my new design, which makes pressure regulation much easier:
I wanted to use capsules with a threaded head, because they are easier to handle.
I couldn't find any supplier for NO2 capsules with threaded heads.
With threaded capsules I can use my new design, which makes pressure regulation much easier:
"You can't wait until life isn't hard anymore before you decide to be happy" (Nightbirde - *12.29.1990 †02.19.2022)
-
- Posts: 118
- Joined: Mon Dec 22, 2008 6:36 pm
Re: First time CO2
I would buy one!
Did you made yourself, or can we buy the equipment anywhere?
Did you made yourself, or can we buy the equipment anywhere?
- Tx_IntactGuy
- Posts: 75
- Joined: Mon Feb 06, 2023 4:46 pm
Re: First time CO2
Very simple Set up. I'm adding mine for reference; I prefer something that lets me inflate more or less hands free. Use aquarium tubing to connect directly to the barb
Last edited by Tx_IntactGuy on Thu Jan 11, 2024 10:51 am, edited 1 time in total.
1st N2O Inflation 2/1/2023 -- 2nd N2O Inflation 2/18/2023 --- 3rd N2O Inflation 3/05/2023
-
- Posts: 118
- Joined: Mon Dec 22, 2008 6:36 pm
Re: First time CO2
Thank you. I've ordered all the parts online.
Can you explain more how you proceed? Where do you place the needle, how deep, how much and long do you fill,...
I am excited!
Can you explain more how you proceed? Where do you place the needle, how deep, how much and long do you fill,...
I am excited!
- Tx_IntactGuy
- Posts: 75
- Joined: Mon Feb 06, 2023 4:46 pm
Re: First time CO2
Firstly, I'm not a medical expert or qualified to give advise. This is just mostly from my own experience having tried this before.
I've tried placing the needle in both the shaft and scrotum skin. What I can tell you is that starting in the scrotum is overall easier and less risky. Make sure you pinch your skin and pull it away from your body so you don't poke your vas deferens or your testicles. If you can, use a light to help find a good spot where there are no veins or capillaries. Between IV needles and IV catheters needles; I'd recommend going with the catheters as there's less risk if you need to move around a bit. Go with a shorter needle, maybe 1" long. I push the entire needle in. Clean, disinfect the area, your hands, etc. If you see blood "flashback" up traveling up the needle, you hit a vein and you need to apply pressure and stop the bleeding, reset and try again.
Up to you. Pay attention to your body and how your skin feels. I like filling up full; and a little bit more to make things taut. Some people keep themselves tied off and stay inflated for a few hours. Personally, I do this as a way to enjoy an orgasm. So once I'm done, I always let the gases escape out of the needle/ needle hole as much as possible. N2O absorbs pretty fast. CO2 will hang around for a few days.
Last edited by Tx_IntactGuy on Mon Dec 25, 2023 6:29 am, edited 2 times in total.
1st N2O Inflation 2/1/2023 -- 2nd N2O Inflation 2/18/2023 --- 3rd N2O Inflation 3/05/2023