I’ve taken the seal off as I’ve been pumping non-stop this week and wearing a band to retain some size.
I’ve never been this far down the tube before!
So annoying that I have to come out now and get ready for the wife coming home from work…
(It’s also annoying that having taken the Juicy XL off, it’s not even uncomfortable now…)
I might have finally reached a size that you could actually, finally, call pumped!
TinyMe! From tiny to...
Moderator: bigray57
- TinyMe
- Posts: 2918
- Joined: Tue Feb 19, 2019 12:11 am
- Location: Hampshire
Re: TinyMe! From tiny to...
Oh to have even an average sized cock….
-
- Posts: 767
- Joined: Sat Nov 01, 2014 2:47 am
- Location: Canada
Re: TinyMe! From tiny to...
Wow keep up the good work your efforts are paying off
-
- Posts: 168
- Joined: Tue Aug 02, 2022 7:31 am
Re: TinyMe! From tiny to...
TinyMe wrote: ↑Fri Jun 23, 2023 12:09 am So, 7 months later, I’ve finally fixed the BM357…
Got a disc top disc (80mm x 4mm - nearly 3”) from Amazon for about £4.20 some months ago, and some Aruldite 2 pack epoxy (cheers BnL ) for about £6.50 at the same time and left it all in the draw for 6 months.
Until yesterday….
I haven’t drilled a hole through it to attach a valve, I have just stuffed the tubing in a là jar pumping.
It works!!
No leakage!!
And to those of you that said it couldn’t be done
if you're gonna thread, watch this 1st.
https://www.youtube.com/watch?v=U0iwCPnDNBY
- TinyMe
- Posts: 2918
- Joined: Tue Feb 19, 2019 12:11 am
- Location: Hampshire
Re: TinyMe! From tiny to...
I don’t have any stuff to do a manual thread (bench, manual bench drill etc) but if I did, this is what I’d be looking for.B33FDICK wrote: ↑Thu Jun 29, 2023 4:21 amTinyMe wrote: ↑Fri Jun 23, 2023 12:09 am So, 7 months later, I’ve finally fixed the BM357…
Got a disc top disc (80mm x 4mm - nearly 3”) from Amazon for about £4.20 some months ago, and some Aruldite 2 pack epoxy (cheers BnL ) for about £6.50 at the same time and left it all in the draw for 6 months.
Until yesterday….
I haven’t drilled a hole through it to attach a valve, I have just stuffed the tubing in a là jar pumping.
It works!!
No leakage!!
And to those of you that said it couldn’t be done
if you're gonna thread, watch this 1st.
https://www.youtube.com/watch?v=U0iwCPnDNBY
Great find B33FDICK - thanks
Oh to have even an average sized cock….
-
- Posts: 899
- Joined: Tue Dec 04, 2018 1:03 pm
- Location: Virginia
Re: TinyMe! From tiny to...
Any news to report about the massage lady? Haven’t seen any news about that recently :0 but I’m glad things are going well!
- TinyMe
- Posts: 2918
- Joined: Tue Feb 19, 2019 12:11 am
- Location: Hampshire
Re: TinyMe! From tiny to...
I don’t see massage lady anymore, but I have been seeing a new waxing lady.ShadetheDWolf wrote: ↑Sun Jul 02, 2023 8:47 am Any news to report about the massage lady? Haven’t seen any news about that recently :0 but I’m glad things are going well!
I went to see her about three weeks ago for my regular Hollywood and full leg wax, but as I was off to the south of France for a week, I had the stomach and back done too.
Essentially I was naked and for the majority of the time, completely exposed whilst she did her work. Because of the extra time allowed for the additional work, and because I was early (for a change) we had plenty of time. She was slower, and took much longer with the aftercare moisturising, including the cock and balls. I enjoyed it very much…
Oh to have even an average sized cock….
- TinyMe
- Posts: 2918
- Joined: Tue Feb 19, 2019 12:11 am
- Location: Hampshire
Re: TinyMe! From tiny to...
I’m thinking about selling my fixed BM357.
As you know, I’ve replaced the lid, but not yet drilled through and attached a valve - which quite frankly I’m extremely unlikely to ever do, but feeding the tubing in (as if it were a regular jar) works perfectly well.
I suppose pumping with water in a nice warm bath is not quite as easy as it would be if there was a valve, but I don’t do that anyway, so I wouldn’t really know. You can always drill a hole and put the valve in yourself if it’s that important.
It works perfectly, and there are no leaks whatsoever, but nevertheless, if it’s wanted and a good price offered, I’d be willing to move it on.
Apart from the residue glue used to put the replacement lid on (which you can see in the photos) it’s still in great condition.
Here are some pictures: if you’re interested, let me know and we can talk money. (I’m not going to accept a ridiculous price for it, as I know how scarce and in demand they are)
UK BUYERS AND ONLY
As you know, I’ve replaced the lid, but not yet drilled through and attached a valve - which quite frankly I’m extremely unlikely to ever do, but feeding the tubing in (as if it were a regular jar) works perfectly well.
I suppose pumping with water in a nice warm bath is not quite as easy as it would be if there was a valve, but I don’t do that anyway, so I wouldn’t really know. You can always drill a hole and put the valve in yourself if it’s that important.
It works perfectly, and there are no leaks whatsoever, but nevertheless, if it’s wanted and a good price offered, I’d be willing to move it on.
Apart from the residue glue used to put the replacement lid on (which you can see in the photos) it’s still in great condition.
Here are some pictures: if you’re interested, let me know and we can talk money. (I’m not going to accept a ridiculous price for it, as I know how scarce and in demand they are)
UK BUYERS AND ONLY
Oh to have even an average sized cock….
-
- Posts: 87
- Joined: Tue Jun 28, 2022 5:44 am
Re: TinyMe! From tiny to...
I have sent you a PM.
-
- Posts: 137
- Joined: Sun Oct 17, 2021 8:08 pm
Re: TinyMe! From tiny to...
is this tube still for sale m8
- TinyMe
- Posts: 2918
- Joined: Tue Feb 19, 2019 12:11 am
- Location: Hampshire
Re: TinyMe! From tiny to...
Loads of PM’s!!
Didn’t realise it was going to be this popular, so will answer the same question that everyone has been asking…
This’ll cost you £220 if buying new, so I think £110 inc P&P (Royal Mail Special Delivery) is fair.
Didn’t realise it was going to be this popular, so will answer the same question that everyone has been asking…
This’ll cost you £220 if buying new, so I think £110 inc P&P (Royal Mail Special Delivery) is fair.
Oh to have even an average sized cock….
- TinyMe
- Posts: 2918
- Joined: Tue Feb 19, 2019 12:11 am
- Location: Hampshire
Re: TinyMe! From tiny to...
£110 Too much?
Make me an offer, you never know!
Make me an offer, you never know!
Oh to have even an average sized cock….
-
- Posts: 899
- Joined: Tue Dec 04, 2018 1:03 pm
- Location: Virginia
Re: TinyMe! From tiny to...
Awesome ^.==.^ and I hope had a great time in France.TinyMe wrote: ↑Wed Jul 19, 2023 6:55 pmI don’t see massage lady anymore, but I have been seeing a new waxing lady.ShadetheDWolf wrote: ↑Sun Jul 02, 2023 8:47 am Any news to report about the massage lady? Haven’t seen any news about that recently :0 but I’m glad things are going well!
I went to see her about three weeks ago for my regular Hollywood and full leg wax, but as I was off to the south of France for a week, I had the stomach and back done too.
Essentially I was naked and for the majority of the time, completely exposed whilst she did her work. Because of the extra time allowed for the additional work, and because I was early (for a change) we had plenty of time. She was slower, and took much longer with the aftercare moisturising, including the cock and balls. I enjoyed it very much…
- privateben
- Posts: 52
- Joined: Sat Mar 11, 2017 3:46 pm
- Location: australia
Re: TinyMe! From tiny to...
Lovely results. Thank you for sharing and inspiring;)
- TinyMe
- Posts: 2918
- Joined: Tue Feb 19, 2019 12:11 am
- Location: Hampshire
Re: TinyMe! From tiny to...
Thanks Ben. I certainly wish I had a meaty cock like yours to go with my balls!
Oh to have even an average sized cock….
-
- Posts: 83
- Joined: Sat Sep 04, 2021 11:08 pm
- Location: Delco PA
Re: TinyMe! From tiny to...
Damn looks good nice keep it up