BALOONR - When big isn't big enough

nohapony · Post by **nohapony** » Mon Feb 27, 2023 3:45 am

Hi folks,

I thought I share a little something I designed with you: the BALOONR. It's a two part 3D printable tube.

You can download the files from here https://github.com/KDxGP/BALOONRv1 and build your own.

Happy printing and pumping!

ynghungnyc · Post by **ynghungnyc** » Mon Feb 27, 2023 3:52 am

Awesome, thanks for sharing! Have you printed and used it? Would love to know how it worked out

nohapony · Post by **nohapony** » Mon Feb 27, 2023 3:53 am

It work's great!

Dink · Post by **Dink** » Mon Feb 27, 2023 5:21 am

Fucking baller. Thank you. Off to print...

FamilyGuy · Post by **FamilyGuy** » Mon Feb 27, 2023 4:25 pm

Love the innovation that people come up with here. Wondering if you use a gasket between the two shells?

TinyMe · Post by **TinyMe** » Mon Feb 27, 2023 4:52 pm

Imagine filling that!!

Like to see someone in a clear version of this

nohapony · Post by **nohapony** » Mon Feb 27, 2023 7:57 pm

FamilyGuy wrote: ↑Mon Feb 27, 2023 4:25 pm Love the innovation that people come up with here. Wondering if you use a gasket between the two shells?

I used foam tape on one shell. Makes a really good seal.

Dink · Post by **Dink** » Tue Feb 28, 2023 12:03 am

nohapony wrote: ↑Mon Feb 27, 2023 3:53 am It work's great

Care to share your print settings? I'll be running PETG, 4 walls, 30% infill, @ 100mm/s with tree supports and am getting 4+days per half using 672g of filament.

It doesn't seem totally unreasonable, but just curious where you were at.

Thanks.

nohapony · Post by **nohapony** » Tue Feb 28, 2023 12:17 am

I'm using a .6mm nozzle on a CoreXY printer, 4 perimeters and 40% with triangle supports. Takes roughly a day to print

Brazilien · Post by **Brazilien** » Tue Feb 28, 2023 8:19 am

Hello. Incredible work. congratulations for making and sharing. I would just make a change. The entry would be 3.75 to 4 inches. We hope to see the result after suso in a marathon.

notgiven87 · Post by **notgiven87** » Wed Mar 01, 2023 1:00 am

Brazilien wrote: ↑Tue Feb 28, 2023 8:19 am Hello. Incredible work. congratulations for making and sharing. I would just make a change. The entry would be 3.75 to 4 inches. We hope to see the result after suso in a marathon.

Maybe two versions because the 3.35 would be perfect for the juicy xl while it might be nice to have a 4 for the pump toys too

neverending · Post by **neverending** » Wed Oct 30, 2024 7:17 pm

Hi there

would it possible to get such an BALOONR ? Please send me a reply.

I was using monster tube sr and it doesnt work well, because at the side the skin of my body got red due the skin was sucked in at the parted edge of monster tube and that hurts.

Also the monster tube was full and I want to expand.....

Nice greetings - and keep pumping.

shyguy_8121 · Post by **shyguy_8121** » Thu Oct 31, 2024 10:32 pm

nohapony wrote: ↑Mon Feb 27, 2023 3:45 am Hi folks,

I thought I share a little something I designed with you: the BALOONR. It's a two part 3D printable tube.

You can download the files from here https://github.com/KDxGP/BALOONRv1 and build your own.

Happy printing and pumping!

drawing.png

Fantastic job! I just wish it were clear. I have thought of designing my own tube..which would be for comfort but not a hinged tube. How easy is it to learn the software? What program did you use?

forums.newart.com

BALOONR - When big isn't big enough

BALOONR - When big isn't big enough

Re: BALOONR - When big isn't big enough

Re: BALOONR - When big isn't big enough

Re: BALOONR - When big isn't big enough

Re: BALOONR - When big isn't big enough

Re: BALOONR - When big isn't big enough

Re: BALOONR - When big isn't big enough

Re: BALOONR - When big isn't big enough

Re: BALOONR - When big isn't big enough

Re: BALOONR - When big isn't big enough

Re: BALOONR - When big isn't big enough

Re: BALOONR - When big isn't big enough

Re: BALOONR - When big isn't big enough