Right Out of the Tube...........

Kanja · Post by **Kanja** » Mon Sep 19, 2005 7:14 am

...........not more than an hour old.

Kanja

alilnut · Post by **alilnut** » Thu Sep 22, 2005 10:11 pm

Kanja - love the balls. I have not really put much into my ball pumping, now I am starting to. I like the fact that the results last longer than dick pumping. Tell me, are your results just from pumping or do you also use saline? What size tube do you use. I think I want a Monster Jr. My largest tube now is a 3", which doesn't seem large enough. Thanks, --A

Kanja · Post by **Kanja** » Thu Sep 22, 2005 11:53 pm

Alilnut....I understand what your talking about, I see ball pumping as more rewarding also. I'm also tired of "20 minutes after cock pumping trying to guess which direction I will be peeing" and a cock that looks like something from a horror movie.

No I dont use saline, I'm into ball pumping not "filling a ballon sack with water", sorry to all saline fillers, but stabbing myself in the balls with a needle and then foce feeding them is not for me. Again this is me, you may think different.

I start with a STJ just to get things bulked a bit. Then swith to #4 in the pic to start to pull my sack and start to shape it. When I'm ready I go to a 3x9 for just my sack and do the finale pumping with it. If all works as it should I get a nicely shaped and full sack that will last for about 2-2n1/2 days.

Ball stetching is the key to a fully pumped sack. The more it stretches the bigger it will pump!

As an aside all my tubes are homemade and if you check my other posts you will find other pics of them with the results.

Hope I've been of help
Kanja

obx · Post by **obx** » Fri Sep 23, 2005 1:18 am

Nice collection of homemade tubes Kanja! Your'e getting awesome results!

Kanja · Post by **Kanja** » Fri Sep 23, 2005 2:06 am

......thanks for your kind words......

Puimping=Phat Sack!!!

Homemade=Phat Wallet!!!

Kanja

PS some of my earlier post have complete building instructions...K

alilnut · Post by **alilnut** » Fri Sep 23, 2005 10:50 pm

Hi Kanja - Nice collection of tubes. I considered buying a Monser Jr. but the cost is outrageous, too me, for a little of, what amounts to fun. I have considered buying a STJ from Wal Mart or somthing, where I hear many people get theirs from. I want my balls to look like yours in the #3 picture. PHAT! The additional dick pumping will be a nice byproduct and good start before going to direct dick pumping. Does the regular tube fitting just screw directly into a STJ? Thanks. --A

Kanja · Post by **Kanja** » Sat Sep 24, 2005 2:41 am

Alilnut......I agree with you on the prices, fu-ken outasight, If people just used the brains they were given they could by pass over all the high priced crap and make the tubes themselves. In the pics below I show the type of fittings I use, its called a 1/4 inch barb valve. I just replaced it for the plastic spigot on a STJ sealed it with good 5 min epoxy and hooked up some 1/4I.D. tube and BAM it ready to pump.

I always felt a little uneasy about using glass STJ so I moved over to the ones in the pic's its poly carbon cost only $7.00 and found it at a kitchen supply outlet. Its a food storage jar! Its called "Click-Clack".

Cheers
Kanja

alilnut · Post by **alilnut** » Sat Sep 24, 2005 3:19 am

Kanja - Got my STJ and rigged it to work with the normal attachments. Sucks in a lot of stomach though. Unfortunately, I won't be able to pump all weekend. Got any advice on keeping my stomach out of the jar? I am looking to a time when it is difficult to get out. Peace. --A

Kanja · Post by **Kanja** » Sat Sep 24, 2005 4:07 am

....dont know if you have a seal around the rim....if not the opening may be so large that it will draw in parts of your lower body when you drop the pressure in the STJ. I did not have that problem with mine, even though the seal I used was home made it made the STJ more comfortable to use (no edge "bite") and made the opening 1/2 inch smaller along the entire rim.

See the pic's for my STJ.

I was pumping one Sun with it for 2 hrs. and couldn't extract my self from it (it is Very Comfortable, when wet pumping) when there was a knock on the door. Hmmm! any body else ever have to answer the door with a STJ hanging from your balls? Oh well.

HTH's
K....

PS...I've been playing with the idea of using bowlers resin as a method of stopping skin migration, lets face it the stuff stops fingers from slipping out of bowling balls when they are thrown, why wouldnt it stop your cock from getting sucked inside of your tube, or in your case the lower part of your bod. Just apply to the rim of the tube or were ever its needed.....Kanja

Kanja · Post by **Kanja** » Sat Sep 24, 2005 9:51 pm

....comfortable enough to wear and roam around in...wet pumping, homemade seal.

Kanja

Kanja · Post by **Kanja** » Sat Sep 24, 2005 10:57 pm

....good mornings work out

Kanja

alongeasy · Post by **alongeasy** » Tue Sep 27, 2005 5:34 pm

Can anybody help me for building that kind of tube. also dont forget the drawing. i prefer follow a pic rather then read a thousand word.

Kanja · Post by **Kanja** » Tue Sep 27, 2005 10:22 pm

.....Just check some of my prior post's and I have posted instructions on how to make this and other tubes, with plenty of pic's, for almost nothing.

K

alilnut · Post by **alilnut** » Wed Sep 28, 2005 11:09 pm

Kanja,

Can you show me a good pic of your seal. I need something I can use to close the opening. I thought of some kind of rubber endcap that I can cut a hole in. Any suggestions. --A

tigerdave · Post by **tigerdave** » Wed Sep 28, 2005 11:46 pm

Great technique and results Kanja!
OK if I publish your pics on the Pumpers Guide website?
http://www.tigerpumping.com/

Keep getting BIGGER man !

Tiger

forums.newart.com

Right Out of the Tube...........

Right Out of the Tube...........

Thanks.....

OBX.....

Again....

A....

Nutter one....

Now this was a.....

Alongeasy.....

Ballpumping Routine