forums.newart.com

I have been working on this design for some time.... the goal was to come up with a cock plug (or wand) that could be worn full time. The collar is first placed behind the cockhead, then a hollow, internal plug about an inch and a half long is inserted. A threaded fitting is then screwed through the collar into the plug. The ball can be unscrewed and serves as a cap... it is hot to piss and cum through this hardware! The whole apparatus is very securely anchored deep in the cock and can be used for pulling and play. Various endings can be screwed into the fitting... long tubes, heavy balls, whatever. I have worn this to work for up to 8 hours at a time without discomfort. Since the wand, or plug, is held so firmly, there is no chafing. I lube the plug thoroughly with vaseline before inserting.

The plug and ball are stainless steel and were made for me by John the Wand man. I made the collar and fitting myself. When I get the design perfected, I will ask John to also make them in stainless.

Hope you like!

another variation.

Dude, those pics are fuckin HOT!!!! I would love to have a device like this. On question though, is it tight around the base of your cock head? Or is that part of the experience?

I would love to see pics of you cumming and pissing with that badboy in there

Thanks, EdgeLord.... actually, I can hardly feel the tight ring underneath the cock head. It is very snug, and holds the plug securely in place inside the cock. This is a very rugged and heavy duty setup which does not move around. I attach another picture, pissing out of a hypodermic like spike... this was an early variation, before I got the stainless steel plug with the screw in end from JohnTheWandMan.