Page 1 of 1
PEG-400 and/or Glycerine (pictures)
Posted: Wed Dec 25, 2024 9:25 am
by Ballsbuilder
Hi there, I bought laboratory grade PEG-400 and Glycerine. Any experience here with that? Is there something that I can mix together to make this formula better? Let me know I’m curious
Re: PEG-400 and/or Glycerine
Posted: Wed Dec 25, 2024 2:34 pm
by kiwibop
Just because something is laboratory grade doesn't mean you can inject / infuse it. PEG-400 is used in dry-eye meds and as a laxative - doesn't mean it should be infused. Glycerin can also be a skin irritant - does want that inside my scrotum thanks
Re: PEG-400 and/or Glycerine
Posted: Thu Dec 26, 2024 2:14 pm
by Ballsbuilder
I did some research, accepted the risks involved and created a formula that kept swelling even hours after injection.
All pain free and the weight feels perfectly. I use syringes to achieve a better cosmetic effect and roundness, downside is the skin irritation.
I injected approximately 20-30cc. The swelling actually looks like 500cc saline.
Re: PEG-400 and/or Glycerine
Posted: Fri Dec 27, 2024 3:27 am
by maXXXbulge
Awesome any pics of the results? 30ml for a 500ml look sounds really amazing
Re: PEG-400 and/or Glycerine
Posted: Mon Feb 10, 2025 12:58 am
by Ballsbuilder
I just did it again..
Please excuse the quality of the pictures!
The swelling migrates to the penis and makes it much bigger and harder. Feels different when I fuck the mistress. She also feels the difference.
![Image]()
Re: PEG-400 and/or Glycerine (pictures)
Posted: Mon Mar 17, 2025 8:07 am
by Ballsbuilder
We are now few weeks and inflations later of the glycerine/propylene glucol and dextrose mix. As I experimented with higher dosages of each compound, I found out that the absorption slows down to weeks until it’s gone. No discomfort or problems occured. All nice firm and round
Re: PEG-400 and/or Glycerine (pictures)
Posted: Thu Mar 20, 2025 12:00 am
by BorisTheOdd
I am fascinated by this PEG-400 as looking into it sort of... Indicates it may be safer than KY to an extent, absorbs faster in the body since its not made of... Plant cellulose, though sourcing it guaranteed sterile is challenging. I feel if I tried it I wouldn't feel confident until after I ran it through a canning process to sterilize it.
I've been in the process of making my own infusion glassware, I have the idea of using 1 liter canning jars, with a lid that has a self healing rubber grommet. With that I could measure out some sodium chloride, add it to distilled water, can it for 20 min at 15 psi, mount it up on some rig that holds the jar upsidedown, then just start infusing. Been a while since I infused but I think I recall iv lines having a air inlet that made it work for rigid containers and not just bags... Right setup would make it near medical grade, i mean canned food can last years without bacteria growth if done properly.
This post made me think, well, maybe I should try this but with this Peg-400, I could use a real small jar and I don't have to worry about making the iv glassware since it just involves a small injection. Reading indicates the body is capable of absorbing it so... Really only downside, with sterility solved, is the potential irritation? Interesting.
Re: PEG-400 and/or Glycerine (pictures)
Posted: Thu Mar 20, 2025 11:23 pm
by Cgene
Are you injecting directly into your testicle or what? Otherwise, looking good. Stay well.
Re: PEG-400 and/or Glycerine (pictures)
Posted: Mon Apr 07, 2025 4:37 am
by Ballsbuilder
No, in the scrotal area. You can put on specific spots with a small needle extra rounding. The more sites and places the better the results.
Re: PEG-400 and/or Glycerine (pictures)
Posted: Mon Apr 07, 2025 4:39 am
by Ballsbuilder
BorisTheOdd wrote: ↑Thu Mar 20, 2025 12:00 am
I am fascinated by this PEG-400 as looking into it sort of... Indicates it may be safer than KY to an extent, absorbs faster in the body since its not made of... Plant cellulose, though sourcing it guaranteed sterile is challenging. I feel if I tried it I wouldn't feel confident until after I ran it through a canning process to sterilize it.
I've been in the process of making my own infusion glassware, I have the idea of using 1 liter canning jars, with a lid that has a self healing rubber grommet. With that I could measure out some sodium chloride, add it to distilled water, can it for 20 min at 15 psi, mount it up on some rig that holds the jar upsidedown, then just start infusing. Been a while since I infused but I think I recall iv lines having a air inlet that made it work for rigid containers and not just bags... Right setup would make it near medical grade, i mean canned food can last years without bacteria growth if done properly.
This post made me think, well, maybe I should try this but with this Peg-400, I could use a real small jar and I don't have to worry about making the iv glassware since it just involves a small injection. Reading indicates the body is capable of absorbing it so... Really only downside, with sterility solved, is the potential irritation? Interesting.
Cool let us know! Just dissolve it with saline or dextrine infusion.
