2023 Growing Prelude99 (pg.12 3.25", 3.5", and 4" ONLY COCK)

[getbigstj]

That’s huge bro nice pump

You should show some pictures of your tool on a weight scale lol

[prelude99]

Wow. That's quite the touch up! Thanks for doing that and feel free to enhance any others!

It's so good to see you back Prelude99, I'm now 85% packing that 2.50 girth wise but something remarkable happened 2 weeks ago, see I have this vacutec automatic pump with pulsar mode which pulsates cock, and a setting called stretch mode which pushes your cock at the top to go up and down while pulsating. Now on this 1 day 1 day off routine of mine I decided to end my 3rd day of pumping with a bang I set the HG to 11 which is the highest the pump can go and percentage of air to 15% pulsating which feels like big stretch right all the way down to the middle of my cock, after a hour with heating pad removed I noticed my cock setting 7.9 inches length just shy of 8 inch length, I only would get to 7.5 the max with the stretch setting. The down side was 2 big blisters on my glans and my skin couldn't roll over my glans because of having a frenlum in the way which put a lot of tension on the skin roll area which in turn blistered but they swelled up big like i had never seen before. Now I'm taking a 2 week break but I notice big changes in bas girth because of the '3' I would use on and off. Now my routine will be get in the "3" for hour and then back down to 2.4/50. My question how do you deal with base pack that feel like the tube might break??....
because that what I started to feel on that day I pushed it in the 2.50 so much that I got blisters at base one at the top and another by my balls but the packing at the bottom made me little uncomfortable, like my skin never been stretched to that limit before.

First off congrats on how much length you've been able to achieve with your new routine! I use a larger tube step down to smaller tube method to gain absurd girth!

Which brings me to your question. Back in the day the tubes I used weren't the quality I use today. When I would grow so huge and get throbbing, I would try to not flex. If I flexed it would spell the end for a tube....well that's what it would feel like. On two occasions I set out to get big enough to break a tube. I filled my 2.75 and waited until it was over packed and I was intensely throbbing. Then I set off with the most massive kegal I could muster then the tube sent three lightning cracks from the base up the length of the tube. Lost all pressure and I pulled out and erupted a huge load also because of what my cock had just done.

The other time was an accident and I flexed without thinking and destroyed the base. Now my cylinders are quite a bit thicker and near impossible to break.

[FamilyGuy]

Just insane how thick you get!
Your getting more coverage of the glans out of the tube these days. No need to "base" wrap anymore?

[Spritzfreak]

Amazing! Love your nice pumped meat. Top!

Plase more out of tube pic´s Thx

[prelude99]

Finished up this session and decided to rip through these custom undies. You are supposed to be able to fit through the hole.

Wrestling this thing with both hands at times doesn't seem like enough.

[BlkPumper]

"The hang time is real here! I was hoping it would reach the ground but didn't quite make it. Maybe next time lol. It was looking real horse like there...."
All I could say was keep reaching....but you will anyway..and we are grateful!
as I saw the guitars and periodic chart in your background made me think... Science and Arts, that's why you are so instrumental!
my eyes, hand and heart are always enjoying the view

[Want2behuge]

Its unbelievable how huge you can get!

Iv been following you for a while and trying to learn and implement the best methods for permanent growth, which i have started to see already.

Im just hoping i can take it to the next level too, i find i can comfortably pump at much higher pressures than 5hg which most people say dont go above/or cant because of discomfort. Iv never had a blister and anything more than a very very very slight discolouration.

I appreciate your indirect help through your posts!

[prelude99]

Doing an over packing session in my 3.25"x11 and this shows the difference in size that pressure yields. The first picture shows zero pressure. That level of pack without any pressure is what happens from over packing. The second picture shows 15"Hg. The length I was reaching in tube was intense! Thought I was gonna reach the end.

When I do I will cum under pressure for sure!

[prelude99]

Just insane how thick you get!
Your getting more coverage of the glans out of the tube these days. No need to "base" wrap anymore?

I still do a base wrap. It is what's leading to the head coverage and increasing overall girth!

[migueldiazcanel]

I wonder if after 10 years of pumping I am still going to have a hard time going above 5hg.
Amazing progress over the years, I've looked back to your first posts and it seems that you could pack a 10x3,25" tube completely since 2007. I was having trouble trying to figure out how much you have gained since you still can't pack the 4" completely, but looking through the outside of the tube photos, the difference in girth is staggering, but also in length too, especially since 2021.
What pressures were you using in 1999 during a session, the same as now?

[prelude99]

I wonder if after 10 years of pumping I am still going to have a hard time going above 5hg.
Amazing progress over the years, I've looked back to your first posts and it seems that you could pack a 10x3,25" tube completely since 2007. I was having trouble trying to figure out how much you have gained since you still can't pack the 4" completely, but looking through the outside of the tube photos, the difference in girth is staggering, but also in length too, especially since 2021.
What pressures were you using in 1999 during a session, the same as now?

Fantastic research! The 3.25" tube I used then was a tapered tube. So it's overall volume was less. A straight 3.25 is a similar volume to a 3.5" tapered tube. Having not packed the 4" yet is almost a choice than a limitation. Due to my work I can't become that big and be decent. My size limit is max pack 3.5" straight tube. When I do that the out of tube size is crazy!

You are correct in noticing the permanent size and pumped size out of tube have grown over the years and that's been my goal. Heck, should be all of our goals! Filling the same size massive tube over and over will eventually lead to a permanent size that reaches smaller tube sizes. For example, I start in a 3.25 and fill it in 45 minutes. If I start in my 3.5 I'll fill it in an hour. With that kind of not pumped starting size I can't fit into a 2.75" tube. I've become the size of a tube I used to take hours to pack!

If I were to take a vacation JUST to pump I could pack my 4.25"! Maybe I'll ask the wife for a holiday like that.

[PumpNCenthusiast]

Just insane how thick you get!
Your getting more coverage of the glans out of the tube these days. No need to "base" wrap anymore?

I still do a base wrap. It is what's leading to the head coverage and increasing overall girth!

What are you using to basewrap? Wanting to start and maybe help increase my girth gains.

[PumpingAus]

What are you using to basewrap? Wanting to start and maybe help increase my girth gains.

Yeah I'd love to know more about this basewrapping and the theory behind it if you don't mind sharing Prelude?

[migueldiazcanel]

Good thing i looked up your oldest posts here, they have already disappeared for what could be forever. I was somehow expecting that, the Mos forum had a couple of threads i didn't fully get to look through before the forum went down and the pictures can't be seen anymore since 2020.

[kp2]

...
If I were to take a vacation JUST to pump I could pack my 4.25"! Maybe I'll ask the wife for a holiday like that.

How did that holiday request go ... ?