Sorry to hear that FG but welcome to the double hernia club. The latest one i had done in Feb' i've now done something i shouldn't and sure i've ripped some of the mesh away, thankfully, not over the worst part but well over to the left. Scan Friday to see if they can see what's happened. Not much i hope. Still, i can pump the cock here and there and the ball stretching tube doesn't seem to bother it but full time package pumping looks like it's further into the future than ever. Good luck with it and hopefully you'll get it sorted soon.
BnL
Pumping to be big & floppy
Moderator: bigray57
- bignlow
- Posts: 2864
- Joined: Wed Jan 27, 2010 7:30 pm
- Location: Rochdale nr Manchester UK
-
- Posts: 119
- Joined: Mon Aug 31, 2020 1:25 am
- Location: Philadelphia
- Contact:
Re: Pumping to be big & floppy
I hope all goes well and you enjoy ya break big guy. Get better soon cause we will be waiting for the comeback
- FamilyGuy
- Posts: 859
- Joined: Wed Oct 11, 2006 9:58 pm
- Location: Virginia
- Contact:
Re: Pumping to be big & floppy
Thanks guys, here's hoping no more operations bnl!
This will give me time to think about how I want to proceed once all healed up. I do know that I'll be in the dick tubes for a fair bit until the sack can take some pressure after the hydrocele operation.
This will give me time to think about how I want to proceed once all healed up. I do know that I'll be in the dick tubes for a fair bit until the sack can take some pressure after the hydrocele operation.
- bignlow
- Posts: 2864
- Joined: Wed Jan 27, 2010 7:30 pm
- Location: Rochdale nr Manchester UK
Re: Pumping to be big & floppy
Find out tomorrow FG. Why the hydrocele op'. I thought they weren't a problem and could be left alone. Apparently i have one on my right ball. Not massive but it was picked up in a scan a while back. Either way, good luck with the procedure and i hope you have a quick recovery.
BnL
BnL
- FamilyGuy
- Posts: 859
- Joined: Wed Oct 11, 2006 9:58 pm
- Location: Virginia
- Contact:
Re: Pumping to be big & floppy
Same to you bnl.
For the most part they are harmless, but the right one grows about a half inch or more past the top of my dick and presses against my cushion. The longer I pump the harder it pushes so I end up stopping. So in a way it's limiting how long I can stay in the jar. It's a shame too because I do love the weight and size but after 2 and half hours it becomes a bit more than I can take.
For the most part they are harmless, but the right one grows about a half inch or more past the top of my dick and presses against my cushion. The longer I pump the harder it pushes so I end up stopping. So in a way it's limiting how long I can stay in the jar. It's a shame too because I do love the weight and size but after 2 and half hours it becomes a bit more than I can take.
-
- Posts: 323
- Joined: Sun Jan 15, 2012 7:53 pm
Re: Pumping to be big & floppy
Yea well I am.20inches around and thats measured after I get out of the vase which takes me a further 2hrs, so.who.knows how big they sre at max tube prior to reduced swelling.
- BlkPumper
- Posts: 690
- Joined: Sat Apr 05, 2014 8:01 am
- Location: DMV
- Contact:
Re: Pumping to be big & floppy
Love you man....Fortitude!
- FamilyGuy
- Posts: 859
- Joined: Wed Oct 11, 2006 9:58 pm
- Location: Virginia
- Contact:
Re: Pumping to be big & floppy
Hey woody1, I'm guessing that the neck of your jar limits how far above your dick the hydrocele grows. Wish mine would have went more downward as yours does.
Your know it BP!
On a lighter side, those that package pump and ride motorcycles how do you adjust your package for comfort? Mine is a vulcan 2000 and at 5'10" not a lot of wiggle room.
Your know it BP!
On a lighter side, those that package pump and ride motorcycles how do you adjust your package for comfort? Mine is a vulcan 2000 and at 5'10" not a lot of wiggle room.
- FamilyGuy
- Posts: 859
- Joined: Wed Oct 11, 2006 9:58 pm
- Location: Virginia
- Contact:
Re: Pumping to be big & floppy
I haven't been able to ball pump, don't want to make the hernia worse so out came the 2.25"x9" tube.
So far pretty good with it and have already ordered a 2.5"x11" tube. Posting the first set here and might start a new thread over in the "Male Pumping" section, kinda like having everything in one place though.
Still a few air pockets but by the time the new tube arrives hopefully will have it packed.
So far pretty good with it and have already ordered a 2.5"x11" tube. Posting the first set here and might start a new thread over in the "Male Pumping" section, kinda like having everything in one place though.
Still a few air pockets but by the time the new tube arrives hopefully will have it packed.
- bignlow
- Posts: 2864
- Joined: Wed Jan 27, 2010 7:30 pm
- Location: Rochdale nr Manchester UK
Re: Pumping to be big & floppy
Looking good FG, you have to take what you can get eh. Been there, done that. Something i'd not done enough of really. hernia got me back to it and something to do in between ball pumping. Not far off the end of that tube either.
BnL
BnL
- Brazilien
- Posts: 309
- Joined: Sat Aug 19, 2006 12:04 pm
- Location: Brazil
- Contact:
Re: Pumping to be big & floppy
Hello Friend, send news...
- K.caseni-Las
- Posts: 316
- Joined: Tue Jan 10, 2012 5:01 pm
-
- Posts: 323
- Joined: Sun Jan 15, 2012 7:53 pm
Re: Pumping to be big & floppy
Yea I currently sit at 19inches unpumped, bigger at night when I lie down, pumped around 23 inches but takes 2 to 3hrs to get out of the jar so I must loose a few inches on the way out
-
- Posts: 87
- Joined: Wed Jun 15, 2005 12:28 pm
Re: Pumping to be big & floppy
[have you tried epoxy such as jb weld for the astj leak? Acetone used to be the choice for plexiglass glue.
Plexiglass was, as I recall, acrylic polymer
quote=just4me post_id=387214 time=1681048973 user_id=108710]
My ASTJ started with a very slow leak and now is nearly useless.
Can't find glue that works
[/quote]
Plexiglass was, as I recall, acrylic polymer
quote=just4me post_id=387214 time=1681048973 user_id=108710]
Check the seams.FamilyGuy wrote: ↑Tue Apr 04, 2023 8:44 pm 'll post pics on Wed for a mid week update and post a vid around Sun.
Not having any luck with the gasket (new) on the MT jr BB keep loosing pressure, replaced the connector for a known good one already . . . no go. I hear ya, 12 hour days sucks. 16 more months and I'll be done with working unless I get a part time, just to get out of the house.
My ASTJ started with a very slow leak and now is nearly useless.
Can't find glue that works
[/quote]
-
- Posts: 323
- Joined: Sun Jan 15, 2012 7:53 pm