pumping bignlow

Talk about ball pumping, stretching, ball enlargement techniques.

Moderator: bigray57

Post Reply
TinyMe
Posts: 3294
Joined: Tue Feb 19, 2019 12:11 am
Location: Hampshire

Re: pumping bignlow

Post by TinyMe »

Do it…!!! :lol:
Oh to have even an average sized cock….
User avatar
bignlow
Posts: 3175
Joined: Wed Jan 27, 2010 7:30 pm
Location: Rochdale nr Manchester UK

Re: pumping bignlow

Post by bignlow »

Almost odds on that i will Tiny. just can't control how much will be showing. looking down i can't see anything until it's all balls out....

Saturday afternoon at work.




11 may 24 1.jpg
11 may 24 2.jpg

With no big race truck to block off the yard this year i have to close the gate to nearly shut and have my van in the yard with the doors and tailgate open. Does'nt blank off the yard or the workshop much but just enough. Anyone passing and looking round the van can get a view in but they're mainly preoccupied by looking where they're going. Someone will have a nosey i'm sure but i'll probably be that busy i wouldn't notice.


Saturday night bed time.




11 may 24 3.jpg
11 may 24 4.jpg
11 may 24 5.jpg
11 may 24 6.jpg


And Sunday morning brew time at home..




12 may 24 1.jpg

BnL
User avatar
bignlow
Posts: 3175
Joined: Wed Jan 27, 2010 7:30 pm
Location: Rochdale nr Manchester UK

Re: pumping bignlow

Post by bignlow »

In work Sunday. Not the earliest of starts but there till 6. had a problem with one on the ramp so late getting into the tube and not getting as long as i wanted but tube time is tube time.




12 may 24 1.jpg
12 may 24 2.jpg
12 may 24 3.jpg
12 may 24 4.jpg
12 may 24 5.jpg
12 may 24 6.jpg
12 may 24 7.jpg

And off to the pub for a quick one. Hoping to get in again mid week.

BnL
User avatar
bignlow
Posts: 3175
Joined: Wed Jan 27, 2010 7:30 pm
Location: Rochdale nr Manchester UK

Re: pumping bignlow

Post by bignlow »

Well, i seem to be on a bit of a roll lately. swapped out the 50 x 42 yesterday afternoon for the 60 x 40. with the 20 x 42 that's 80 mm and 3 1/4 lb.
These are bed time last night. .,...




13 may 24 1.jpg
13 may 24 2.jpg
13 may 24 3.jpg
13 may 24 4.jpg
13 may 24 5.jpg
13 may 24 6.jpg

Been hanging nicely all day, hopefully a few mm of gains coming and tomorrow i'm still hopeful of getting back in the tube. Knowing this place though, we'll see.

BnL
User avatar
bignlow
Posts: 3175
Joined: Wed Jan 27, 2010 7:30 pm
Location: Rochdale nr Manchester UK

Re: pumping bignlow

Post by bignlow »

Finally, Thursday afternoon i got the time to get into a tube. 70mm straight, 1 hour 15.




16 may 24 1.jpg
16 may 24 2.jpg
16 may 24 3.jpg
16 may 24 4.jpg

That's definitely the furthest i've been down that tube, progress .....

Straight out of the tube.




16 may 24 5.jpg
16 may 24 6.jpg
16 may 24 7.jpg
16 may 24 8.jpg


biggest ID weights i have are 46mm and they were a bit of a bugger to get on.




16 may 24 9.jpg
16 may 24 10.jpg

Swapped out to the 42's around 9pm and still with them at the moment but the 40 x 60 is nice and warm and a 20 x 42, 3 1/4 lb then chippy time....


BnL
User avatar
greenie
Posts: 761
Joined: Fri Jun 17, 2005 1:30 pm
Location: East Coast Australia

Re: pumping bignlow

Post by greenie »

Your balls hang like a true bull, so damn hot
The bigger they are the harder I get.
Bert1922
Posts: 84
Joined: Wed Aug 25, 2021 9:04 pm

Re: pumping bignlow

Post by Bert1922 »

BnL, the pictures just out of the pump are magnificent. They are a motivator. Thanks!
Tomas
Posts: 102
Joined: Tue Mar 26, 2024 3:30 am

Re: pumping bignlow

Post by Tomas »

Wow, wow and wow again. Wish mine came out of the tube like yours BNL. Great pics. Thanks for sharing.
REBinNYC
Posts: 203
Joined: Sun Jun 16, 2002 11:33 pm
Location: Johnson City, TN

Re: pumping bignlow

Post by REBinNYC »

Looking great! I'll bet they'll be to your knees soon!
User avatar
bignlow
Posts: 3175
Joined: Wed Jan 27, 2010 7:30 pm
Location: Rochdale nr Manchester UK

Re: pumping bignlow

Post by bignlow »

greenie, glad you like them.
Bert & Tomas, thanks for liking and if that's the sort of set you're looking for it's a narrow tube. pull for length in-between weights. Once you have the length you can start to fill them out.
Reb, That would be nice then shove them into the junior.....

Saturday afternoon managed another hour in the small straight tube getting longer in the tube now so much of the sac is wider after and it's getting to be a job to get the 46 ID on.

These are 10 mins or so out of the tube and 46 id weights @ 2 1/2 lb.




18 may 24 1.jpg
18 may 24 2.jpg


Sunday morning i swapped the 40 x 46 out for the 50 x 42 keeping the 20 on for 2 3/4 lb. First job Sunday morning was a naked brew in the sun and a bit of breakfast before going down to work to pick some stuff up to do at home in the back garden. Also, early Sunday massage lady had been on saying her car wouldn't start at one point on the Saturday so she got a jump start and got home. Sunday morning it wasn't starting aging so i said if you can get a jump start get it down to the garage, i'm going anyway and we'll see what's going on. On getting to the garage the 50 x 42 was getting just a bit tight so swaped the 20 out and added the 40 x 46 back at the bottom. 90mm and 3 3/4 lb. By the time massage lady got her i was already back naked loading up the van. She puled up and walked up the yard and said " i knew you'd be naked", doesn't phase her at all. 30 mins later she was on her way and i finished loading the van. 3 3/4 lb felt wonderful but with the rest of the day to be spent in the back garden i took the big 46 off and went back to the 20. Back home i was naked again apart from when i had to into next doors garden and out to the van. After a good soak later on these were bed time.




19 may 24 1.jpg
19 may 24 2.jpg
19 may 24 3.jpg
19 may 24 4.jpg


Balls caught a bit of sun but that was easily sorted with some after sun and savlon late that night and this morning.

Currently an hour into the 70mm straight tube again. If i can get he 46 on i'll leave it at just the one, 1 3/4 lb, let then have an easy night and tomorrow plan it to get my old 70 into 80 out and see how that goes. If all goes well it'll be another session Thursday morning in the old tube to turn up at massage lady's for a treatment. See how she likes those and see if she'll do a bit of camera work again.


BnL
User avatar
bignlow
Posts: 3175
Joined: Wed Jan 27, 2010 7:30 pm
Location: Rochdale nr Manchester UK

Re: pumping bignlow

Post by bignlow »

After another hour in the small tube yesterday, these are bed time last night.




20 may 24 1.jpg
20 may 24 2.jpg
20 may 24 3.jpg
20 may 24 4.jpg
20 may 24 5.jpg


Keeping them in a bit of a rest mode at the moment with just the 40 x 46 on. 1 3/4 lb, nice and steady. at some stage later today or tomorrow i'm looking at getting into the 70 into 80 chamber tube. yesterday i lost a day thinking today would be Wednesday with massage lady Thursday so today i might go again in the 70 straight, the 70 into 80 tomorrow and back into that early doors Thursday to turn up at massage lady's in it. I'll have a think while i'm working.......

BnL
User avatar
bignlow
Posts: 3175
Joined: Wed Jan 27, 2010 7:30 pm
Location: Rochdale nr Manchester UK

Re: pumping bignlow

Post by bignlow »

A few from yesterday, another hour in the 70 straight.




21 may 24 1.jpg
21 may 24 2.jpg
21 may 24 3.jpg


4th session since the end of last week and still getting longer in the tube which is good news.

Straight out of the tube.....




21 may 24 4.jpg
21 may 24 5.jpg
21 may 24 6.jpg


Plan today is to get into an old 70 into 80 tube and fatten them up a bit....

BnL
User avatar
bignlow
Posts: 3175
Joined: Wed Jan 27, 2010 7:30 pm
Location: Rochdale nr Manchester UK

Re: pumping bignlow

Post by bignlow »

Long day Wednesday but with everything on the warm i was having a hour in the tube no matter what. I'd already decided i was going to use an old 70 into 80 and eventually around 8 pm i was in.




22 may 24 1.jpg
22 may 24 2.jpg

The 70 is 12 inch long, this old tube is only 9 but wider in the main chamber. Must have got a good 8 there...

Straight out of the tube.




22 may 24 3.jpg
22 may 24 4.jpg


And bed time last night...




22 may 24 5.jpg
22 may 24 6.jpg
22 may 24 7.jpg
22 may 24 8.jpg
22 may 24 9.jpg



Left the 70 on the warm in the office all night. didn't think i'd get in it this morning but managed it. 35 mins in that before swapping out to the 70 into 80 until i get that off at massage lady's.
I've also turned up an 80 straight tube. identical to the 70 in build and 12 inch long. Not be too long before i'm back in that but i would like to fill the length in the 70 first. They can have a rest after today. Maybe get them in the 70 on Saturday and we're off to the caravan Sunday for a week where they can have a proper rest apart from the weights.

BnL
User avatar
bignlow
Posts: 3175
Joined: Wed Jan 27, 2010 7:30 pm
Location: Rochdale nr Manchester UK

Re: pumping bignlow

Post by bignlow »

massage lady's today and she took these when i got there.....




23 may 24 1.jpg
23 may 24 2.jpg
23 may 24 3.jpg


Ever so nearly at the bottom of that tube.


Out of the tube and first thing was a pee. Not the warmest in there today and by the time i'd got back downstairs they were already pulling back so no point taking any more.

Bnl
TinyMe
Posts: 3294
Joined: Tue Feb 19, 2019 12:11 am
Location: Hampshire

Re: pumping bignlow

Post by TinyMe »

9” of balls…

Pretty awesome! 👏🏻 👏🏻👏🏻
Oh to have even an average sized cock….
Post Reply