Page 3 of 298

Re: pumping bignlow

Posted: Tue Aug 13, 2013 8:22 pm
by bignlow
After keeping everything warm it's back into the tube.
aug 014.jpg
aug 016.jpg
Think half an hour went to 40 mins but never mind.
aug 018.jpg
aug 019.jpg
aug 021.jpg
Time for another rest.
After keeping everything warm again it's time to go into the big tube (tube 11)
aug 023.jpg
Normally i would stick to tube 10 for another session but as it was late i decided on the big tube.

Re: pumping bignlow

Posted: Tue Aug 13, 2013 8:29 pm
by bignlow
Surprisingly, i was getting quite tight in this tube so probably moved up at the right time. these are after around 40 mins in the big tube.
aug 027.jpg
aug 029.jpg
aug 030.jpg
aug 031.jpg
aug 032.jpg
That last tube is ambitiously long but was made out of what was left of a length of tube. Getting tight will be good for stretching down the tube but it looks like tube 12 wil be here sooner than i thought.
Could really do with someone with a camera or using my phone to get a different perspective, even i'm getting a bit fed up with all the similar photo's. Any offers ?

Happy pumping everyone.

Bignlow

Re: pumping bignlow

Posted: Tue Aug 13, 2013 9:36 pm
by bignlow
the boys at 2.30 this afternoon (Tuesday)
aug 30.jpg
aug 31.jpg
Settling down nicely.

Re: pumping bignlow

Posted: Wed Aug 14, 2013 12:35 am
by george gannet
great looking balls. Nice work1

Re: pumping bignlow

Posted: Wed Aug 14, 2013 6:19 am
by onyxpumper
Awesome set you have there! Were you naturally somewhat big n low before you started pumping or did they get bigger and hang lower over time?

Re: pumping bignlow

Posted: Wed Aug 14, 2013 8:15 am
by TheDongShow
lol dude, that is big swinging sack you have, great rear views.

do you double up on seals to help swell/pack?

Re: pumping bignlow

Posted: Wed Aug 14, 2013 9:53 am
by bullbags
Magnificent photos and perfect tear drop contour and huge, a 'superior' male genital package , a pleasure to view 8) Don't stop ,you will be 'massive' :twisted: BB.

Re: pumping bignlow

Posted: Wed Aug 14, 2013 4:09 pm
by bignlow
Thanks for the comments again chaps.

Onyxpumper-- no i wasn't particularly big before i started. if you look back through this thread at the pictures of my tubes, i could get cock and balls in that standard sex shop cock pump tube. It was a bit of a job getting everything in but i could do it. I've just basically upped the size of the tubes as i've gone along.

Dong-- not sure what you mean by doubling up on the seals, could you explain please. I'm always happy to hear of anything that could encourage growth.

A quick one from last night/this morning at 1.00am, 24 hours after Monday nights pump and the boys are settling down nicely now. Once out of the tubes, as everything starts to cool down my balls pull back into a grapefruit with no hang at all and it's usually a couple of days before things settle down and you get to see the latest results, it now seems to be taking around 20 hours or so, so some progress there.
aug 037.jpg
As i'm away this weekend for 2 weeks holiday my tackle will get a well earned rest so tonight will be the last big pump for a short while and hopefully i can get started earlier and get at least 2 sessions in the big tube. I'll post the results tomorrow and then i'll be quiet on here for a short while so looking forward to everyones comments when i get back.

Bignlow

Re: pumping bignlow

Posted: Wed Aug 14, 2013 5:23 pm
by StretchMine
These are textbook-perfect genitals. Very well done my pumping friend!
Stretch

Re: pumping bignlow

Posted: Wed Aug 14, 2013 5:26 pm
by bignlow
Cheers stretch

Re: pumping bignlow

Posted: Thu Aug 15, 2013 12:21 am
by bignlow
Just thought i'd leave these with you whilst i have 5 mins. when not pumping regularly it's into the weights.
2.jpg
3.jpg
5.jpg
6.jpg
7.jpg
bignlow

Re: pumping bignlow

Posted: Thu Aug 15, 2013 1:25 am
by pumping eggs
very nice shape of your sack, love it.

Re: pumping bignlow

Posted: Thu Aug 15, 2013 6:12 am
by SFBallpumper
How did you get the ring of silicon inside the larger tubes?

Re: pumping bignlow

Posted: Thu Aug 15, 2013 4:44 pm
by bignlow
SF ballpumper.
if you mean the silicone at the edges of the tube sleeves, i use a caulking gun to fill the difference between the tube sizes and then get a small piece of plastic with a sraight edge, lay it across the joint and roll the tube on a table. The plastic edge removes the excess and fills in any gaps leaving a nice taper for ease of getting out and takes the inner tube edge away for comfort. In the bigger tubes i can do this through the entry but the smaller ones are done through the bottom of the tube before the end cap is put on.

Re: pumping bignlow

Posted: Thu Aug 15, 2013 5:06 pm
by bignlow
After a longer than expected day at work i decided i would treat myself and eat out so straight home, into the tube and into the bath.
aug 14 001.jpg
around half an hour and its off for tea.
aug 14 003.jpg
Once back at home things have cooled slightly
aug 14 005.jpg
so its back into a warm bath to loosen everything off again.
aug 14 007.jpg
Missing a photo here, it wont upload it, bugger, never mind, back into the tube.
aug 14 008.jpg