Re: Stretching from Australia
Posted: Sat Nov 02, 2024 8:11 pm
That would be ok for 10 mins or so though right? Obviously not for long periods of time....
Page 8 of 9
Re: Stretching from Australia
Posted: Sun Nov 03, 2024 12:57 am
I suppose... I'm no doctor... Could lead to permanent discoloration?
Re: Stretching from Australia
Posted: Sun Dec 15, 2024 8:58 am
Putting on some heavy weight. Couldn't fit any more
Re: Stretching from Australia
Posted: Sun Dec 15, 2024 8:17 pm
Wow. That's amazing. Those larger weights you have, are they the magnetic fastening ones?
I got some 30mm magnetic weights and they only use one magnet which really isn't strong enough. When I adjust myself it wants to pop the removable section out. Hoping to get a 40mm unit and it have the two magnets per side.
Re: Stretching from Australia
Posted: Mon Dec 23, 2024 7:51 am
Bit of Xmas cock pumping
Re: Stretching from Australia
Posted: Sat Jan 25, 2025 6:37 am
Got both happening today. 2 h in the pump
Re: Stretching from Australia
Posted: Sat Jan 25, 2025 6:51 am
Re: Stretching from Australia
Posted: Sat Jan 25, 2025 7:08 am
Working on more length 135mm at about 1.8kg.
My standard 3 weights were getting loose and clunking so I got the 4th screw together at 40mm.
So that's a 15mm ring @200g
Oval mag at 800g 60mm (tape is to keep it together)
Oval screw together at 400g 40mm
And a shaped slip in at 400g 30mm.
Cand do it for all day but I'm working on it with this warm weather.
Lil bit of pumped cock as well
My standard 3 weights were getting loose and clunking so I got the 4th screw together at 40mm.
So that's a 15mm ring @200g
Oval mag at 800g 60mm (tape is to keep it together)
Oval screw together at 400g 40mm
And a shaped slip in at 400g 30mm.
Cand do it for all day but I'm working on it with this warm weather.
Lil bit of pumped cock as well
Re: Stretching from Australia
Posted: Sat Jan 25, 2025 10:06 pm
marlin1 wrote: ↑Sat Jan 25, 2025 7:08 am Working on more length 135mm at about 1.8kg.
My standard 3 weights were getting loose and clunking so I got the 4th screw together at 40mm.
So that's a 15mm ring @200g
Oval mag at 800g 60mm (tape is to keep it together)
Oval screw together at 400g 40mm
And a shaped slip in at 400g 30mm.
Cand do it for all day but I'm working on it with this warm weather.
Lil bit of pumped cock as well
20250125_100147.jpg20250125_100136.jpg
Impressive stretch mate !!
Re: Stretching from Australia
Posted: Sun Jan 26, 2025 6:32 am
Re: Stretching from Australia
Posted: Sat Feb 22, 2025 12:53 pm
Testing my limits
When I first started 70mm was maxed out.
Now 160mm maxed out.
Can't do it for long thought.
When I first started 70mm was maxed out.
Now 160mm maxed out.
Can't do it for long thought.
Re: Stretching from Australia
Posted: Sun Feb 23, 2025 7:27 am
Incredible stretch man!! You're measure about a 185mm from the beginning of your scrotum under your cock to the bottom of your sack right? How long did it take to gain that much skin as well as stretch the ball cords that much?
Re: Stretching from Australia
Posted: Thu Feb 27, 2025 12:58 pm
Hi all
Thought i would post my latest using only a 22oz weight which seems to be the right weight for maintenance and a great feel. I can wear that continuously for hours on end.
I think also after years of stretching a reasonable light weight now will increase the length overtime .
Judging by what I can see, it has definitely gone lower.
Thought i would post my latest using only a 22oz weight which seems to be the right weight for maintenance and a great feel. I can wear that continuously for hours on end.
I think also after years of stretching a reasonable light weight now will increase the length overtime .
Judging by what I can see, it has definitely gone lower.
Re: Stretching from Australia
Posted: Sat Mar 01, 2025 1:30 pm
Muss ein tolles Gefühl sein , sieht echt gut aus mit den Gewichten.
Re: Stretching from Australia
Posted: Tue Mar 04, 2025 9:37 pm
Great hang @Ballzy96
They are so low!
They are so low!