HOME MADE 6 INCH x 10 INCH TUBE

[pumpman12]

Blairo ........ I couldn't agree more with you, "We need a high quality seal for all the doit yourselfers " I've redone my seals at least a dozen times.
For me it is mainly comfort and ease to exit at the end of my pump session. Believe it or not I hated using my Bullmaster Magnum cause it hurt to exit the tube and remove the silicone seal. With my home made tube the seal stays connected to the tube and I slide right out with zero pain.

[blairo]

Hi Pumpman12,

Thanks for your reply but could you give us a sort of notice or photos to do a diy seal 'cause there is no manufacturer who build this type of seal.

Waiting so much about your silicone seal fabrication.
Thanks

[pumpman12]

Hi Pumpman12,

Thanks for your reply but could you give us a sort of notice or photos to do a diy seal 'cause there is no manufacturer who build this type of seal.

Waiting so much about your silicone seal fabrication.
Thanks

Blairo, here is a link to the thread on my home made seal. It is very crud but it works great. viewtopic.php?f=5&t=50999&hilit=homemade+seal

[pumpman12]

Still using my 6 X 10. Had a great three days in the tube last week. SORRY I forgot to bring my camera with me.You know when I’m up against the tube I’m 19 inches in circumference

[WatchMeGrow]

Wow. The results speak for themselves! Looks like I have a new project to work on. Absolutely inspiring work. Now to find a suitable jar/vase…

[Cmorgan62670]

Wow those are some great results!! Keep them big.

[Cmorgan62670]

Guys the easiest stuff I’ve found to work with is let’s resin which you can buy from Amazon. Find a container that’s just bigger than your opening and and a 3” glass for the center opening. Suspend your tube down into the silicone at proper depth! Let it cure for 24 hours and your done!!

[pumpman12]

Guys the easiest stuff I’ve found to work with is let’s resin which you can buy from Amazon. Find a container that’s just bigger than your opening and and a 3” glass for the center opening. Suspend your tube down into the silicone at proper depth! Let it cure for 24 hours and your done!!

I’m gonna try this stuff soon, comfort is everything if you want to do a long marathon pump

[pumpman12]

Had a great hour and a half last night in my 6 X 10 . Check out these first two pics as you can see I'm up against the glass tube. Just a note ... a 6 inch diameter tube has a circumference of 19.5 - 20 inches give or take a quarter inch or so !!

[WatchMeGrow]

Good to see you back in the tube ! Inspirational as ever.

[pumpman12]

Thanks Watch Me, here are three more pics, Ten seconds, twenty seconds and final of thirty seconds to exit the tube. The home made seal is the key pumpers !!!

[WatchMeGrow]

Wow. Great motivation to get in the tube and GROW. The oversized straight tube with a home made cylinder is definitely incredibly effective

[pumpman12]

I must say that with my many years of experience I must give credit to keeping warm and hydration to my rapid growth. Here are three more pics from last night. Basically getting strapped in after my pump session !

[WatchMeGrow]

Absolutely massive ! Hope to see you fill that tube one day.

[pumpman12]

To fill that tube will take some time , but yes It would be awesome. Here is the last of the pics from Wednesdays pump, its a short vid, hope it down loads.