Best just ball pump
Moderator: bigray57
-
- Posts: 34
- Joined: Wed Oct 24, 2018 9:20 am
Best just ball pump
Hey guys I been looking into getting a pump just to work on my balls . What's some good ones for that ? I've been looking at the ones pump toys sales .
-
- Posts: 2407
- Joined: Fri Dec 10, 2010 11:11 pm
- Location: South Texas
Re: Best just ball pump
Just get a one quart mason jar and a length of tubing.
If you become addicted and outgrow it get a sun tea jar.
If you start getting stuck in it get a monster SR.
If you become addicted and outgrow it get a sun tea jar.
If you start getting stuck in it get a monster SR.
-
- Posts: 34
- Joined: Wed Oct 24, 2018 9:20 am
Re: Best just ball pump
Like I have a tube set up I built all ready , I have the hand pump from the auto parts store . And some mason jars , do I need drill the jar and put a fitting in it to hook up the pipe ? And do I need to get or make a seal for the jar ?
-
- Posts: 180
- Joined: Wed Sep 10, 2014 10:05 pm
Re: Best just ball pump
No need to drill a hole. Just slide the tubing down the side of your sac. I find it easier to just pull the air out by mouth. I don’t even use a seal half the time. I would love to get my hands on a monster SR. though. I’m always getting stuck in my jars. Guess that’s a good sign.
-
- Posts: 34
- Joined: Wed Oct 24, 2018 9:20 am
Re: Best just ball pump
I tried just sliding the tube in this morning and it worked for a sec but lost vacuum . I think I'm going to drill a hole and a seal . I'm shaved so it should have sealed pretty good on just the skin .
-
- Posts: 2407
- Joined: Fri Dec 10, 2010 11:11 pm
- Location: South Texas
Re: Best just ball pump
You have to yank out the tube once you reach the desired vacuum level.Rustyfarmall wrote: ↑Sat Oct 27, 2018 11:12 pm I tried just sliding the tube in this morning and it worked for a sec but lost vacuum . I think I'm going to drill a hole and a seal . I'm shaved so it should have sealed pretty good on just the skin .
-
- Posts: 2215
- Joined: Wed Apr 23, 2008 6:51 am
Re: Best just ball pump
Are you wanting to bring them down like bigandlow or just a big round sack? Look thru threads there are so many possibilities.
-
- Posts: 893
- Joined: Fri May 06, 2016 7:07 am
Re: Best just ball pump
hi,
I've tried the thing where you slide a tube in a jar and then pull it out.
seems like I have too much skin and it bunches up and air leaks out.
that would be amazing though.... could use any size jar you want
I've tried the thing where you slide a tube in a jar and then pull it out.
seems like I have too much skin and it bunches up and air leaks out.
that would be amazing though.... could use any size jar you want
-
- Posts: 34
- Joined: Wed Oct 24, 2018 9:20 am
Re: Best just ball pump
I bought me some glass drill bits so now I can port any size and style of glass I want . I'm like you to much skin all ready and it would blow the seal when I pulled out the tube
-
- Posts: 893
- Joined: Fri May 06, 2016 7:07 am
Re: Best just ball pump
Hey... help me out here... can you tell me the specific tools. bits you used? i have a drill and was thinking about getting a Dremmel tool but not sure what to get.Rustyfarmall wrote: ↑Sun Nov 04, 2018 11:41 pmI bought me some glass drill bits so now I can port any size and style of glass I want . I'm like you to much skin all ready and it would blow the seal when I pulled out the tube
-
- Posts: 761
- Joined: Sat Nov 01, 2014 2:47 am
- Location: Canada
Re: Best just ball pump
They are drill bits used for drilling holes in ceramic tyles or glass u can get them at a hardware store use at low speed on your drill or else the glass can heat up to much and crack
-
- Posts: 893
- Joined: Fri May 06, 2016 7:07 am
Re: Best just ball pump
slow speed. gotcha
did you use anything like oil or water on the drill site?
did you use anything like oil or water on the drill site?
- bigtitlover
- Posts: 1928
- Joined: Mon Mar 29, 2010 2:05 am
- Location: Germany
Re: Best just ball pump
I pumping since more than 3 years in a jar or mug without any pump.
It works well without drilling any hole in the jar . Only a small hose sucking out the air.
Important is a good sealing and well shaved aerea . I only use babyoil and it works well .
It needs two or threetimes to get a really tight connection.
So tight that I can walk around the house only with produce the vacuum with my mouth.
Try it and keep on pumping
It works well without drilling any hole in the jar . Only a small hose sucking out the air.
Important is a good sealing and well shaved aerea . I only use babyoil and it works well .
It needs two or threetimes to get a really tight connection.
So tight that I can walk around the house only with produce the vacuum with my mouth.
Try it and keep on pumping
-
- Posts: 34
- Joined: Wed Oct 24, 2018 9:20 am
Re: Best just ball pump
I got a set of three bits at Walmart . I drilled the holes very slowly starting with the smallest bit up to what fit the fitting I have . The used sealant to seal around it . With the brake pump I can get up to 10psi or more . I didn't like the mouth vacuum .just4me wrote: ↑Mon Nov 05, 2018 7:10 amHey... help me out here... can you tell me the specific tools. bits you used? i have a drill and was thinking about getting a Dremmel tool but not sure what to get.Rustyfarmall wrote: ↑Sun Nov 04, 2018 11:41 pmI bought me some glass drill bits so now I can port any size and style of glass I want . I'm like you to much skin all ready and it would blow the seal when I pulled out the tube
-
- Posts: 34
- Joined: Wed Oct 24, 2018 9:20 am
Re: Best just ball pump
Here is the first jar I've built and works really well , just a little short for my shaft to fit . 45 min and 5 psi on the gauge