My pumping routine for HUGE balls: Pressure peaks!

Talk about ball pumping, stretching, ball enlargement techniques.

Moderator: bigray57

User avatar
Tanuki-Balls
Posts: 125
Joined: Mon Jun 30, 2014 12:57 am
Location: Zurich, Switzerland
Contact:

Re: My pumping routine for HUGE balls: Pressure peaks!

Post by Tanuki-Balls »

powerfulpete1235 wrote:As promised...I pumped using your routine in my stj for 90mins. Then changed water and pumped for another 90mins. Love how big I'm getting and thanks for your advice on the peak method.
This is really hot, thanks for trying it. I'm shure you'll get even bigger result if you get used to the new routine.
Aka Tatios, Cowbag, Newart since 1998: https://www.newart.com/pump/pumpmar98/tatios.htm
20 years pumping: https://monstercockland.com/231188/guy-playing-with-his-huge-pumped-meat/
My routine: https://forums.newart.com/phpbb/viewtopic.php?f=5&t=44841
User avatar
Tanuki-Balls
Posts: 125
Joined: Mon Jun 30, 2014 12:57 am
Location: Zurich, Switzerland
Contact:

Re: My pumping routine for HUGE balls: Pressure peaks!

Post by Tanuki-Balls »

doniger_guy you are on the right route! The controller i use is switching the solenoid valves as soon as a set point (lower or upper) is reached. There is NO timer involved (The "egg" timer as mentioned before is just an other task for the display) The level is measured using a 0-5V pressure sensor. To get that fast ramp you need a very strong pump, minimum 15L pump volume a minute. This is a big and expensive machine. The solenoid must have a bore of 4mm, i use VDW350 from SMC. Yes, the pump is running without interruption, as you say. I use both functions of the pump, sucking and blowing. This is why i use two of the solenoid valves. The solenoids are switching between X and II path. The coil of tubing is a actually a buffer to get a smooth switching between the states. The two power supplys on the botten are for the pump and the other one for the heating pad on the tube. Yes, the tube is heated to a comfortable temperature 8)
PICT0061.JPG
Aka Tatios, Cowbag, Newart since 1998: https://www.newart.com/pump/pumpmar98/tatios.htm
20 years pumping: https://monstercockland.com/231188/guy-playing-with-his-huge-pumped-meat/
My routine: https://forums.newart.com/phpbb/viewtopic.php?f=5&t=44841
User avatar
Tanuki-Balls
Posts: 125
Joined: Mon Jun 30, 2014 12:57 am
Location: Zurich, Switzerland
Contact:

Re: My pumping routine for HUGE balls: Pressure peaks!

Post by Tanuki-Balls »

Back to the balls!
0c1e085bf4784ef49949953916.jpg
0c1e0861773e24a2fe1fe4bc69.jpg
Aka Tatios, Cowbag, Newart since 1998: https://www.newart.com/pump/pumpmar98/tatios.htm
20 years pumping: https://monstercockland.com/231188/guy-playing-with-his-huge-pumped-meat/
My routine: https://forums.newart.com/phpbb/viewtopic.php?f=5&t=44841
User avatar
stonermusclebear
Posts: 253
Joined: Sat Feb 02, 2013 1:57 pm
Location: Los Angeles

Re: My pumping routine for HUGE balls: Pressure peaks!

Post by stonermusclebear »

As always---FUCKING incredible.
User avatar
Tanuki-Balls
Posts: 125
Joined: Mon Jun 30, 2014 12:57 am
Location: Zurich, Switzerland
Contact:

Re: My pumping routine for HUGE balls: Pressure peaks!

Post by Tanuki-Balls »

Aka Tatios, Cowbag, Newart since 1998: https://www.newart.com/pump/pumpmar98/tatios.htm
20 years pumping: https://monstercockland.com/231188/guy-playing-with-his-huge-pumped-meat/
My routine: https://forums.newart.com/phpbb/viewtopic.php?f=5&t=44841
mRuss
Posts: 3037
Joined: Tue Jun 25, 2002 2:39 am
Location: the East Coast of Canada
Contact:

Re: My pumping routine for HUGE balls: Pressure peaks!

Post by mRuss »

That video is just amazing. I love the way you tie that cord around your package to accentuate your size.

Lastly, I didn't know you were "CowBag"! I have been a fan of your work for ages :)
pumpguy101
Posts: 820
Joined: Thu Jul 23, 2009 8:33 pm
Location: Ohio

Re: My pumping routine for HUGE balls: Pressure peaks!

Post by pumpguy101 »

Incredible video! What a hot post - thanks for the tips on how you pump, too. Best of luck to you.
User avatar
bign1212
Posts: 15
Joined: Mon Nov 12, 2012 12:49 pm

Re: My pumping routine for HUGE balls: Pressure peaks!

Post by bign1212 »

Incredible pump Tanuki! Your size is just amazing...I hope one day to be able to get even half as big as you can!
User avatar
K.caseni-Las
Posts: 316
Joined: Tue Jan 10, 2012 5:01 pm

Re: My pumping routine for HUGE balls: Pressure peaks!

Post by K.caseni-Las »

Your pump results look marverlous. My technique is much simpler. I have a baby frank milking pump. Works great for me. It is highly adjustable, pressure and duration of pump and release cycle. I love it. I used to pump for size, now I just pump for lust. Reading the e paper in the morning with some sack&cock stimulation makes it easier to read about the monsterous daily events.
For size I fill half a litre of Gl5%. Doesnt sound like much, but thats the size, shape and weight I prefer to spend a day . Especially now, that the summer seems to start here, when we dont have to wear that many layers of coats to keep warm........
User avatar
Tanuki-Balls
Posts: 125
Joined: Mon Jun 30, 2014 12:57 am
Location: Zurich, Switzerland
Contact:

Re: My pumping routine for HUGE balls: Pressure peaks!

Post by Tanuki-Balls »

Thanks all for your nice words! I'm really motivated to go even bigger :mrgreen:
Aka Tatios, Cowbag, Newart since 1998: https://www.newart.com/pump/pumpmar98/tatios.htm
20 years pumping: https://monstercockland.com/231188/guy-playing-with-his-huge-pumped-meat/
My routine: https://forums.newart.com/phpbb/viewtopic.php?f=5&t=44841
timff
Posts: 518
Joined: Wed Apr 13, 2011 4:31 pm

Re: My pumping routine for HUGE balls: Pressure peaks!

Post by timff »

Hi, Just wanted to say I really love watching your video of how huge you pump and the routine you use to get it fantastic
. I Have a digi pump which I can programme but it doesn't drop the pressure quickly like your pump does , umm I am wondering if you have any tips advice as to what would be a good routine or time how many seconds to maybe programme it op try and get a the effect you get etc
I think your pumping is amazing , love it .
Tim
User avatar
Tanuki-Balls
Posts: 125
Joined: Mon Jun 30, 2014 12:57 am
Location: Zurich, Switzerland
Contact:

Re: My pumping routine for HUGE balls: Pressure peaks!

Post by Tanuki-Balls »

timff wrote:Hi, Just wanted to say I really love watching your video of how huge you pump and the routine you use to get it fantastic
. I Have a digi pump which I can programme but it doesn't drop the pressure quickly like your pump does , umm I am wondering if you have any tips advice as to what would be a good routine or time how many seconds to maybe programme it op try and get a the effect you get etc
I think your pumping is amazing , love it .
Tim
Thx tim! What pump do u use? My pump is dropping the pressure active, it is pumping fresh air into the tube. Most of the pumps do this passive, they just open an inlet somehow...
Aka Tatios, Cowbag, Newart since 1998: https://www.newart.com/pump/pumpmar98/tatios.htm
20 years pumping: https://monstercockland.com/231188/guy-playing-with-his-huge-pumped-meat/
My routine: https://forums.newart.com/phpbb/viewtopic.php?f=5&t=44841
timff
Posts: 518
Joined: Wed Apr 13, 2011 4:31 pm

Re: My pumping routine for HUGE balls: Pressure peaks!

Post by timff »

Hello, Thanks for such a quick reply.
I'm using the CTC digital maximize know as the dp=4000. I guess it doesn't pump free air in etc , probably just reduces pressure. its ok , because you can progamme it to say pump at 4hg for 20 seconds and then 3hg for say 15 seconds , but it does not have the power or ability to reduce/increase quickly
anyway I keep playing around with it to see if its possible to get a big pump from it by setting the pressures up and down , but no real improvments yet .
you look amazing and it must feel wonderful.
Tim
User avatar
GTOK
Posts: 408
Joined: Fri Feb 03, 2012 7:36 pm

Re: My pumping routine for HUGE balls: Pressure peaks!

Post by GTOK »

Tanuki,

GREAT pics of that bulge! That's a monster pair! Two questions:
a) How did you get the heating grid elements on the tube?
b) If you didn't make it, where can it be purchased?

I really want to add the heating elements that to my LongJohnny and/or my ASTJ.
Follow me on Twitter @iLogPE
Current stats: 8" BPEL x 6.5 MEG ---> Goal: 9x7 and beyond
User avatar
Tanuki-Balls
Posts: 125
Joined: Mon Jun 30, 2014 12:57 am
Location: Zurich, Switzerland
Contact:

Re: My pumping routine for HUGE balls: Pressure peaks!

Post by Tanuki-Balls »

GTOK wrote:Tanuki,

GREAT pics of that bulge! That's a monster pair! Two questions:
a) How did you get the heating grid elements on the tube?
b) If you didn't make it, where can it be purchased?

I really want to add the heating elements that to my LongJohnny and/or my ASTJ.
Thanks my friend :D

Search the internet for "heating foil 12v". There are many different shapes araund. Mine is 12V/36W and has the size of 137x320mm.
Some of the foils do have an adhesive side. Connect a "DC regulated power supply" to it. I use mine at about 9 Volt.

Oh! And be careful, don't burn your marbles! I dit it once :( A cup of wather will spreat the heat equally. Try not to go above body temp...
Aka Tatios, Cowbag, Newart since 1998: https://www.newart.com/pump/pumpmar98/tatios.htm
20 years pumping: https://monstercockland.com/231188/guy-playing-with-his-huge-pumped-meat/
My routine: https://forums.newart.com/phpbb/viewtopic.php?f=5&t=44841
Post Reply