Bladder play

[spiros75]

Very nice idea my friend Grampareg! I would try it Very soon! But I was also thinking to fill up my bladder with a liquid like lube in gel or something like that through the catheter..... But I am not sure if its ok to place this kind of liquid inside my bladder...

[failbucket]

I love bladder inflation. I do it with water from the shower and with air pump. Check out my video, should encourage some quick cum's... I think ;P

https://www.porn hub.com/users/fluidfilled

if you copy that link, you'll have to smash porn and hub back together... it was giving me an error otherwise

[soundsgreat87]

I love bladder inflation. I do it with water from the shower and with air pump. Check out my video, should encourage some quick cum's... I think ;P

https://www.porn hub.com/users/fluidfilled

if you copy that link, you'll have to smash porn and hub back together... it was giving me an error otherwise

Oh my god dude, that's amazing! Do you have any idea what the volume of your bladder is?? That's the biggest I've ever seen...

[Oregazmick]

I love bladder inflation. I do it with water from the shower and with air pump. Check out my video, should encourage some quick cum's... I think ;P

https://www.porn hub.com/users/fluidfilled

if you copy that link, you'll have to smash porn and hub back together... it was giving me an error otherwise

Very interesting to watch so thanks for posting your video, but I would caution against blowing air or any gas into the bladder as I understand it is potentially very dangerous. Additionally, having had bladder infections I do not recommend pumping water or any suitable liquid into the bladder unless it is known to be sterile. Suitable definitely sterile liquid warmed to body heat or slightly above can be fun.

[mac67]

that was fucking hot !!!

[Dude19]

So it's been a while since I said anything about bladder play. I would like to see if any one who is new has any stories to share of would like some information on the subject.
So recently I ordered more 3/8 ball bearings. I first went and tried like 20 again since I hadn't done any for a while and that was good. I then set it aside for like a month until last night where I after playing around with other stuff I decide I would go ahead and try them again. This time I did it in batches of 50.
Here is a little reading pleasure for you all. I kept count of them grabbing 2 at a time plopping them in pushing them down the urethra to the base of the shaft. Once I had 10 in there I would then push them farther in until they popped into the bladder. After I got 50 in I used a sound to make sure they went into the bladder. I then stood up moved around and you could slightly hear the ones on top rolling around couldn't feel it moving much. Then I repeated it again this time kind of sitting up. They still easily popped info my bladder making a clinging noise each time. Now with 100 of them in my bladder it was more noticeable both in movement and noise. But still not very loud. But I wasn't done yet. I did some more sudden movements which would get more of them making noise. There was only mild discomfort in doing that sudden movement. It was very pleasurable to have all those ball bearings in my bladder. I than laid there for a while trying to decide if I leave what I have in there or put more in. So I decided I would look to see if I could find out the most I have done so far I was pretty sure it was something like 200 but I couldn't remember. So I went on here and started looking for the thread which was buried like 3 pages or so deep. Once I found this thread I than had to read to find out how many was my max. Which took a while and I still don't think that was it only being 100. So I decide that I would go ahead and put more in repeating the process of grabbing 2 at a time until ten. Pushing them in now laying back down slightly lifting my butt up once they got past the scrotum where surprisingly even with already 100 in my bladder they easily rolled right in. Soon I had 150 ball bearing rolling around in my bladder. But I didn't want to stop there. I did however do a little moving around to hear them roll around in my bladder. There was now I feeling that when they moved into a certain way I felt I would very badly have to pee. Which I know going into this that I would defiantly have the sharp urge to pee. So I laid back down and repeated this again. Using a long silicone sound to make sure that they were all in my bladder. I easily now had 200 3/8 in. Ball bearings still just regular polished steal (Which I still don't recommend for reasons I will mention lated) in my bladder. They were easily moved from side to side front to back. The urge to pee growing more urgent I had planned to try and leave them in until the next day since it was already like 4am I think. But the urge had grown to much and I tend to sleep on my side so all that weight now pushing on the side now prevented me from getting comfortable plus the urge to pee growing by the second. This meant I had to try to go pee. Not wanting them to disappear before I could count them I grabbed a large bowl to pee in and catch them. I had slightly forgot that the last time I had a bunch in my bladder they would make it very difficult to pee or have them come out on their own. This quickly came back to me when I tried to pee and only a little odd came out with about 10 of them. So I went back to bed. Laid there for a minute deciding on whether I just slowly let them come out on there own or flush them out in the shower. I decided to flush them out since I didn't know how long they would take to come out. The last time I did that I think it took me at least a full day of drinking a lot of water to get them out but that was like maybe 40. So I went and spent probably the next 20 minutes in the shower flushing them out. First I had some trouble with getting the water to force its way into to my bladder but after some trail and error found an effective way that worked. The feeling of the balls popping there way back out as water flowed in them back out. I did that until I thought I got them all out so I stopped and counted them come to find out I have only got about 60 out. So back in I went this time I kept flushing them out until none came out. This time I counted and I was off by 2. I was like ok maybe I missed count in the first place so I actually had to pee. I held my hand under my penis to just in case catch any that may have missed and good thing to the 2 I was short popped out. Went and put my clothes back on because now I am cold. I than took the ball bearing and accurately counted them and all 200 of them were there. After rinsing them off and drying them I noticed that a bunch of the were more rust colored than the rest which just had a duplex finish look. That being to the point that I do not recommend using them in this manner the rust colored ones have lost the protective finish on them and could potentially be dangerous to your health. I know that what I am doing is not safe but I am still be extra careful about how I am doing things to minimize any risks.
Now I know that I could just get high quality stainless steel ones and have them in there for much longer but I have not found my limit really yet. Now I know I can hold easily 200 3/8 ball bearings I just got to find out if I can hold more and how much more I can handle. I have thought about going bigger but I only worry that if I go bigger they may become stuck in there.

[slkdyk]

Hi, I have been making my own plugs and other things. I have used 440 series stainless and 304 series stainless. The 440 seems to tarnish (not rust) when left in for a period of time while the 304 remains shiny. I found Ebay item number 301151482978 to be 3/8 made from 316 so you will have to look for 304. I have a 1.25" thru hole what I call a bullet (plug without the larger end that prevents over insertion) that I insert into my prostate. It will stay in between the 2 sphincter and does not actually enter the bladder. I use a tether or I would not be able to retrieve it. It seats pretty solid there. With the thru hole the piss will not push it out. The 304 does not loose its shine even after being inserted for over 24hrs. Ebay has many more of the 440 than the 304 so you will have to look. I don't know how the 316 alloy will react. Just a side note, 440 can be picked up or retrieved with a magnet, 304 or 316 can not which is why I use a tether.
Here is a tip on finding out how many balls you can hold. Wait until you really have to piss and piss in a jar/bottle. Measure it, pour it out and fill the same jar with your SS balls. This will give you an idea if you are exceeding the size of the bladder.
If you don't get all the balls out you might get to meet some nice people in the Urologists office. I know I did when I lost my bullet when I used it without the tether.
Have fun
sd

[slkdyk]

Hi, Any further updates with the Stainless Steel Balls???
sd

[kp2]

Can't believe I missed this thread.

I discovered bladder play in the bath as a new teen - much to my mother's shock when I showed her some new tricks! Lol. Innocence!

Needless to say, none of my bladder play over the years has been notable for its attention to sterility, but so far only water and air - and no problems. It is difficult to explain why you're farting while peeing ...

Nevertheless, being careful is cool - but have fun in there!