When I pump for an extended period of time I find that I fill the tube (pack) at the base first, then my donut starts to form and packs the tube. The problem is, after the donut, it seems like all the pressure is on the head and I never get along the shaft to expand and pack my tube.
I like to start with warm water, then drain it, lube up, and pump some more. My ideal end result would be a nice uniform pack so it comes out of the tube like that.
Any ideas on how to get the middle shaft to pack like the rest?
Advice needed for packing
Moderator: bigray57
-
MrTeacup
- Posts: 73
- Joined: Tue Dec 21, 2004 2:28 am
- Location: x0||||||
-
tigerdave
- Posts: 777
- Joined: Thu Jun 27, 2002 9:13 am
- Location: Calgary, Canada
- Contact:
Hi man,
You're right about all the pressure being on the head once your donut packs.
You can also try milking the donut between sets, to reduce the fluid build-up.
For more donut tips, check the Pumper's Guide donut page at
http://www.tigerpumping.com/pages/donut.html
Good luck,
Tiger
You're right about all the pressure being on the head once your donut packs.
You can also try milking the donut between sets, to reduce the fluid build-up.
For more donut tips, check the Pumper's Guide donut page at
http://www.tigerpumping.com/pages/donut.html
Good luck,
Tiger