Testicle stretching
Moderator: bigray57
-
- Posts: 18
- Joined: Wed Nov 08, 2023 1:15 am
Testicle stretching
Starting to stretch with a cheap alternative to split collars . Try stainless steel shackles .
-
- Posts: 91
- Joined: Sun Aug 21, 2022 4:57 am
Re: Testicle stretching
That's how I started.
Kept adding more and got heavier shackles
Kept adding more and got heavier shackles
-
- Posts: 6
- Joined: Mon Feb 13, 2023 11:51 am
Re: Testicle stretching
Hey Marlin
Can I ask you what size shackle that is?
Thanks
Can I ask you what size shackle that is?
Thanks
-
- Posts: 18
- Joined: Wed Nov 08, 2023 1:15 am
Re: Testicle stretching
What rings are you using with the shackles ?
-
- Posts: 91
- Joined: Sun Aug 21, 2022 4:57 am
Re: Testicle stretching
The shackles are good if you want piece of mind for them not coming off. Ie nut slip.
My smaller ones are 32 mm inner diameter which I put on the bottom.
From there they go bigger for weight
My smaller ones are 32 mm inner diameter which I put on the bottom.
From there they go bigger for weight
-
- Posts: 18
- Joined: Wed Nov 08, 2023 1:15 am
Re: Testicle stretching
I can see the shackles in your photos but it looks like you have steel rings as well , or are they all shackles ? .
On a good day I can wear 4 shackles for a nice stretch . Never tried a butt plug though .
On a good day I can wear 4 shackles for a nice stretch . Never tried a butt plug though .
-
- Posts: 9
- Joined: Thu Dec 08, 2022 2:07 pm
-
- Posts: 9
- Joined: Thu Dec 08, 2022 2:07 pm
-
- Posts: 283
- Joined: Sun Jul 05, 2020 1:17 am
Re: Testicle stretching
I have a rig similar to that; two 8mm steel rods joined at one end with a steel block. I call it "the fork."
The spacing between the rods is 10mm. I haven't had any circulation problems, and occasionally a testicle will slip through, so I'm going to make another one with an 8mm spacing. At least, I plan to, when I find some 'round tuits.'
The spacing between the rods is 10mm. I haven't had any circulation problems, and occasionally a testicle will slip through, so I'm going to make another one with an 8mm spacing. At least, I plan to, when I find some 'round tuits.'