First few pumps
-
- Posts: 1
- Joined: Fri Apr 14, 2023 3:13 am
First few pumps
I just got into this with my SO. I have the doc Johnson pump but it’s not big enough so I’ve been using my SO cock pump but am looking to up the cylinder size to really get results.
-
- Posts: 1322
- Joined: Fri Aug 08, 2008 8:08 pm
- Location: Ontario, Canada
Re: First few pumps
Potential is there. Bigger cup = bigger results. Welcome to the Forum...
-
- Posts: 86
- Joined: Wed Feb 19, 2020 5:46 pm
Re: First few pumps
Welcome to the world of pumping, it's a fantastic hobby to share. As regards bigger cups, we have found that the bigger cups are really expensive. So l make my own, the results are mixed, but with each proto the results get better & better. I have just finished the latest one, we both like getting as big results as possible.
l have high hopes for it, if it works l will post some pics.
l have high hopes for it, if it works l will post some pics.
-
- Posts: 59
- Joined: Thu Apr 18, 2013 3:00 am
- Location: Ontario Canada
- Contact:
Re: First few pumps
Looking just fine.
-
- Posts: 990
- Joined: Mon Jan 08, 2007 9:45 am
- Location: TX
Re: First few pumps
Even the smaller cup looks great! Thanks for sharing with us.
-
- Posts: 11
- Joined: Tue Jul 26, 2022 3:41 pm
- Contact:
- blazinballa
- Posts: 61
- Joined: Mon Dec 22, 2008 11:04 am
- Location: Bay area, CA
- Contact:
Re: First few pumps
How did u make that? Wat size cylinder did u start with?XBR wrote: ↑Sun Apr 16, 2023 12:04 am Welcome to the world of pumping, it's a fantastic hobby to share. As regards bigger cups, we have found that the bigger cups are really expensive. So l make my own, the results are mixed, but with each proto the results get better & better. I have just finished the latest one, we both like getting as big results as possible.
l have high hopes for it, if it works l will post some pics.
- Bgemi10
- Posts: 529
- Joined: Fri Aug 23, 2019 1:45 am
- Location: MA
Re: First few pumps
Froehle seems to make some great pumpsXBR wrote: ↑Sun Apr 16, 2023 12:04 am Welcome to the world of pumping, it's a fantastic hobby to share. As regards bigger cups, we have found that the bigger cups are really expensive. So l make my own, the results are mixed, but with each proto the results get better & better. I have just finished the latest one, we both like getting as big results as possible.
l have high hopes for it, if it works l will post some pics.
https://www.froehle.de/en/mobile/category/8-vaginapumps
-
- Posts: 151
- Joined: Thu Feb 25, 2016 3:48 am
Re: First few pumps
thank you, looking great.
-
- Posts: 86
- Joined: Wed Feb 19, 2020 5:46 pm
Re: First few pumps
" How did u make that? Wat size cylinder did u start with?"
I think it was a 125mm acrylic tube, l cut and glued the end cap and drilled it for a brass adapter. To take the vacuum tube, l think l will start using quick releases on the next protos.
Then l shaped the business end, using a heatgun and a simple wooden former wearing rigger gloves, so l could hold it whilst it cooled. It works OK but needs the addition of a probe, to create the size and shape that we are after. I hope that makes sense. (A bit like a rosebud cup/tube)
"Froehle seems to make some great pumps"
Yeah thanks, we have a Froehle cup, and it's great but we need a bigger cup for the bigger results.
I think it was a 125mm acrylic tube, l cut and glued the end cap and drilled it for a brass adapter. To take the vacuum tube, l think l will start using quick releases on the next protos.
Then l shaped the business end, using a heatgun and a simple wooden former wearing rigger gloves, so l could hold it whilst it cooled. It works OK but needs the addition of a probe, to create the size and shape that we are after. I hope that makes sense. (A bit like a rosebud cup/tube)
"Froehle seems to make some great pumps"
Yeah thanks, we have a Froehle cup, and it's great but we need a bigger cup for the bigger results.
-
- Posts: 990
- Joined: Mon Jan 08, 2007 9:45 am
- Location: TX
Re: First few pumps
Thank you for the explanation XBR
- Bgemi10
- Posts: 529
- Joined: Fri Aug 23, 2019 1:45 am
- Location: MA
Re: First few pumps
I remember coming across another site with larger cups but I can't remember now. I'll see if I can find it for youXBR wrote: ↑Thu Apr 20, 2023 7:20 pm " How did u make that? Wat size cylinder did u start with?"
I think it was a 125mm acrylic tube, l cut and glued the end cap and drilled it for a brass adapter. To take the vacuum tube, l think l will start using quick releases on the next protos.
Then l shaped the business end, using a heatgun and a simple wooden former wearing rigger gloves, so l could hold it whilst it cooled. It works OK but needs the addition of a probe, to create the size and shape that we are after. I hope that makes sense. (A bit like a rosebud cup/tube)
"Froehle seems to make some great pumps"
Yeah thanks, we have a Froehle cup, and it's great but we need a bigger cup for the bigger results.
-
- Posts: 2218
- Joined: Wed Apr 23, 2008 6:51 am
Re: First few pumps
Like your ingenuity.