My experience with Surgilube

[ChuckM]

When you inject are you adding to the existing encapsulations, or new locations each time?

best regards,
Chuck

[just4me]

When you inject are you adding to the existing encapsulations, or new locations each time?

best regards,
Chuck

Now, I am injecting into the same mass.
I've done three in the same place. I like having one big encapsulation instead of a lot of smaller lumps.
(no complaints about squirrel and his lumps. amazing. simply amazing)

If you read my thread you will find a post where i injected into a very firm established mass.
the first time a lot of liquid shot out because of the pressure.
the second time the actual Surgilube pushed back out of the mass and through the needle hole.

As long as the lump is soft to firm It seems ok to inject into it.
once its crazy hard... just dont do it.

[Squirrel]

I'd have preferred to just inject in the same mass over and over, but at the time I was facing that decision there was very little info available about how it worked.

If a fair amount of SL immediately starts pushing out of an injection point, I'd do everything possible to drain it and seal it as quickly as possible. I'd also take at least a 1-2 month break before trying again. The complication I had where an injection point leaked for 3-4 months straight probably could have been avoided if I just sealed it and stopped for longer than I did.

[just4me]

If a fair amount of SL immediately starts pushing out of an injection point, I'd do everything possible to drain it and seal it as quickly as possible. I'd also take at least a 1-2 month break before trying again. The complication I had where an injection point leaked for 3-4 months straight probably could have been avoided if I just sealed it and stopped for longer than I did.
[/quote]
Yeah, you scared me into a cautionary state with your experience.
Both times I had blow back through the injection site I spent a lot of time pressing as much out as possible.
Last time I had an opening that oozed for a couple of days. Part Surgilube and part fluid.
BUT, every chance i got I was squeezing more and more out. It was never much. just a few drops.
but I really wanted that injection site to heal.

[just4me]

Woke up a little above 14.75".
Difficult to sleep above 14".
1" doesnt seem like much until you consider its spherical. (or nearly so)
Fever was gone yesterday evening.
not feeling achy although a little run down,
not sure if this is from not sleeping well or my reaction to the surgilube
either way I'm postponing my next small add until Sunday or Monday.

Sunday evening, pumped for an hour or so
tuesday afternoon is when the s welling started from the last three adds
Much more that I expected and a full week after the last add.
I'll update this evening
-
Update
12 hours later holding steady at 14.5" ish.
Swelling has gone down as a whole. now the new add is firming up and is not competely round.
it seems to be attached to the encapsulation though.

[just4me]

By Casual Friday I was between 14 and 14.5"
that is a good size to be functional.
for those who are away it's a given that i'll be wearing light colored jeans instead of dark dress slacks

I wore a shorter than usual dress shirt and
caught some sideways glances and an out right stare

good convo with the one guy who is non judgmental about this.

Planned to do a 15-20cc add this evening.
managed to get 10cc and stopped.
i wasnt able to inject into the new mass before it got stiff so only a little went in and the some more of the
pinkish yellowish fluid drained for a while.

Wish I had done more.
also wish I had just bailed not not caried through because this week is super busy and risking the fever and tiredness may be a test.

[just4me]

It's been 2 weeks since my last add
planned on doing 20 and only managed to get 10 in.
side effects have been light.

I havent pumped in two weeks either.
my STJ broke. the whole bottom came off.
it is interesting that the encapsulated mass is still round and very prominent.
13.5" around all the time now.
if anyone knows what kind of glue to use i would like to know.

[just4me]

woke up a little early from work and decided to see how the glue job worked on my ASTJ.
Amazingly well.
this is the first time in over a year that it held a vacuum.
i filed the edge rough on the end cap and tube and used epoxy.

Pumped 90 minutes this morning and it took between 15 and 20 min to get out.
good kind of pain exiting.

measurement right out of the tube is a little over 16.5
I'll prolly end up not going in to work today.
ive tried on several pants and nothing hides this.

used to get over 16" but on weekend so Monday i could be biggish but managable.
May 5 marked my 7 year anniversry of being on this site.
cant believe its been this long.
never expected some of the experiences ive had.
most possitive with pumping.
surgilube... mixed bag of experience and feelings
love getting this big so fast though.

[just4me]

i decided to go into work. by noon i was a little less that 16"
went commando because it all hangs and is easier to hide.
some subtle glances.
those who know i pump asked if i pumped on a Monday because usually Friday is my show off day... casual.
about 12 hours later at home it is a little more that 15.75" around.

walking anywhere was uncomfortable because my sack was rubbing agasint the seam in my pants.
noonish i put on some supportive underwear.
no way to hide it then.
just held something in front of me casually as i walked to and from.

on my feet all day long. probably is what kept me from losing too much size
this evening i went agasint my better judgement and inject 24cc.
weird experience with that. i'll wait a few days before detailing.
im pretty sure im at the point where i can maintain 14" with minimal pumping. or an occasional top off.
i'll wait for a week or so and see though.

[4sumfun]

It's been a hell of a ride as an observer. Amazing gains you've had and a few worrying incidents but I wish I was able to do what you've done.

[just4me]

It's been a hell of a ride as an observer. Amazing gains you've had and a few worrying incidents but I wish I was able to do what you've done.

Thanks for chiming in.
sometimes i wonder if anyone is paying attention out there.
why cant you do this?
if you can keep it in check and not go overboard then its actualy only BAD soemtimes... ha haa
once the side effects go away. seems like it affects me more than most though.

Might take a week or more off and do soemthing stupid ... again

[4sumfun]

Thanks for chiming in.
sometimes i wonder if anyone is paying attention out there.
why cant you do this?
if you can keep it in check and not go overboard then its actualy only BAD soemtimes... ha haa
once the side effects go away. seems like it affects me more than most though.

Might take a week or more off and do soemthing stupid ... again

Mostly it's because my partner isn't very fond of the size or the feel. I've done saline and other temporary enlargements. The feedback has been it's nice but the hardness is lost and sex hurts with the way bigger thickness.

The other reason is the huge variability of where the KY/SL settles. I like having for myself a symmetrical shape. I know I would end up trying to top up or fix little dips or low areas, over fill then need to do other areas to compensate. I'd end up way beyond my originally intended size.

[just4me]

Thanks for chiming in.
sometimes i wonder if anyone is paying attention out there.
why cant you do this?
if you can keep it in check and not go overboard then its actualy only BAD soemtimes... ha haa
once the side effects go away. seems like it affects me more than most though.

Might take a week or more off and do soemthing stupid ... again

Mostly it's because my partner isn't very fond of the size or the feel. I've done saline and other temporary enlargements. The feedback has been it's nice but the hardness is lost and sex hurts with the way bigger thickness.

The other reason is the huge variability of where the KY/SL settles. I like having for myself a symmetrical shape. I know I would end up trying to top up or fix little dips or low areas, over fill then need to do other areas to compensate. I'd end up way beyond my originally intended size.

i used to have a similair problem with not being as hard after pumping sometimes.
i backed off on pressure and duration and didnt pump as big and it worked out really well.

losing symmetry is a pretty common worry. and it definately is unpredictable.
i like being lopsided. not sure why.

one mistake, imo, is that some try to make an add to try and get a balanced look too soon after the add before. sometimes it looks like things get worse instead of better. In the mean time i guess live vicariously through everyone else on here

[Taurox]

I don't think I've commented in this thread yet but I'll say I'm always happy to read about other folks' experiences. We're such a niche community that I feel like it's important to share information, both factual and anecdotal. Thanks for the regular updates. Keep it coming!

[just4me]

Monday was up over 16"
tuesday about 15.5
today 14.5" this is the size i want to stay at.
I think that saturday i have some time to add 10-20 again if i drop below 14"
thats the plan...
every time i drop below the target size... add to get back up there.
planning on a couple of months for it to level out

any thoughts?