It's time my wife graduated to a deeper pussy cup. We currently have the Size Matters pink cup, which just a bit over 2 inches deep. Every cup I've seen so far doesn't list how deep the cup is only width and length if at all. Anyone know where we can get a deeper cup? A minimum of three inches deep, preferably 4 and she prefers the oval shape.
Thanks
Looking for a Deeper Pussy Cup
- Brazilien
- Posts: 312
- Joined: Sat Aug 19, 2006 12:04 pm
- Location: Brazil
- Contact:
- major77
- Posts: 1561
- Joined: Thu May 12, 2005 11:59 pm
- Location: Norway
-
- Posts: 387
- Joined: Wed Jun 17, 2009 5:02 pm
Re: Looking for a Deeper Pussy Cup
Try naughtypumps.com. They have different sizes and are comfortable to use.
Hope that helps.
Cheers
pumpernackel
Hope that helps.
Cheers
pumpernackel
-
- Posts: 991
- Joined: Mon Jan 08, 2007 9:45 am
- Location: TX
Re: Looking for a Deeper Pussy Cup
These look good. Thanks
"Try naughtypumps.com. They have different sizes and are comfortable to use.
Hope that helps.
Cheers pumpernickel"
"Try naughtypumps.com. They have different sizes and are comfortable to use.
Hope that helps.
Cheers pumpernickel"
-
- Posts: 991
- Joined: Mon Jan 08, 2007 9:45 am
- Location: TX
Re: Looking for a Deeper Pussy Cup
Can you install your own pump connection? I use this type.
-
- Posts: 387
- Joined: Wed Jun 17, 2009 5:02 pm
Re: Looking for a Deeper Pussy Cup
Naughtypumps pussy cup works without any threaded connection.
You need their own battery driven vacuum producing device.
Cheers
pumpernackel
You need their own battery driven vacuum producing device.
Cheers
pumpernackel
-
- Posts: 991
- Joined: Mon Jan 08, 2007 9:45 am
- Location: TX
Re: Looking for a Deeper Pussy Cup
Thank you for your response. Their photos seem to show a flat, sealed top. I don't see how their pump would attach. I was hoping that it doesn't have any predrilled holes.
-
- Posts: 390
- Joined: Mon Feb 23, 2015 10:18 am
Re: Looking for a Deeper Pussy Cup
It has a tiny air hole in it for there pump.....
I drilled it out and tapped it with 1/8 Pipe tap, the one i got my gf so we could use my pump setup.
Just need a drill bit, 1/8 pipe tap, and a 1/8 barbed hose connector or i do think the female couplers we all use thread into that i think, use pipe sealant tape too.the male connector does slide into the end of my 1/4 tubing.
Hope this helps.
I drilled it out and tapped it with 1/8 Pipe tap, the one i got my gf so we could use my pump setup.
Just need a drill bit, 1/8 pipe tap, and a 1/8 barbed hose connector or i do think the female couplers we all use thread into that i think, use pipe sealant tape too.the male connector does slide into the end of my 1/4 tubing.
Hope this helps.
-
- Posts: 387
- Joined: Wed Jun 17, 2009 5:02 pm
Re: Looking for a Deeper Pussy Cup
If you want to avoid any drilling and glueing order the Handy-Vac device.
Wall thickness of the end cap is not specially thick so accept any tap or suchlike.
Generating the vacuum is quite simple with HANDY-Vac and the valve works with
vacuum and atmospheric pressure - dead simple.
And another clue: for better pussy visibility order a clear end cap.
Just my 2 Cents
cheers
pumpernackel
Wall thickness of the end cap is not specially thick so accept any tap or suchlike.
Generating the vacuum is quite simple with HANDY-Vac and the valve works with
vacuum and atmospheric pressure - dead simple.
And another clue: for better pussy visibility order a clear end cap.
Just my 2 Cents
cheers
pumpernackel
-
- Posts: 991
- Joined: Mon Jan 08, 2007 9:45 am
- Location: TX
Re: Looking for a Deeper Pussy Cup
Thanks for your response. I'd say that was more like a dollar's worth!
-
- Posts: 36
- Joined: Sat Jul 13, 2013 8:02 am
Re: Looking for a Deeper Pussy Cup
Thanks I'll look at these. I'm with ImSnowMan, I prefer those connectors as that's what I use. I already have an electric pump, which would facilitate dual pumping!