Juicy XL / Monster Tube

[playajjj]

i like the Juicy XL, but it still doesn't stay seated on the PumpMaster Magnum without popping off, so i made an oomoo 30 silicone seal that's working rather well, doesn't look shabby all for about 2-1/2 hours of work and $26 of raw materials and an $18 can of spray release.

[colchesterbloke]

What diameter is the MT, wondering if the mod i've used on my STJ might help.

[jr1975atv]

Anyone try this with saline or dextrose? Wondering if it would be comfortable and stretch over 18"

[Doxen]

Anyone try this with saline or dextrose? Wondering if it would be comfortable and stretch over 18"

It may be a hassle to get it on without squeezing your your balls too much. I tried putting it on when I was having balls inflated around that size, but I gave up, didn't want to hurt myself or bust the injection site open with the fiddling.
It might work for putting it on before you start if your skin can take wearing it for longer (lotion might help with that). I use my juicy xl for smaller injections to restrict the fluids to my sac otherwise

[thicknfun]

Pumping us so intense with Juicy. Always drooling now leaving a puddle in the tube. Hot stuff!!!!

[Tw125]

For my part, before using Monster Tube with juicy XL, i'm using normal jar to increase the size of my balls. After it, i'm using MT senior without any problem. Just need to control the pressure, to don't see juicy XL comming in of tube, and only with manual pump. I'll post new topic soon about my résult!!

[wonky]

I snatched up both Juicy's a while back to test out and here is my experience with both...

The regular Juicy worked great with 2" - 2.5" cock tubes.

The XL Juicy worked perfectly with the MT Jr.

However, with both the MT Sr and the BM, I couldn't get the XL Juicy to work.
The size looks about right but it's so soft and flexible it would sort of crumple and quickly get sucked inside every time, probably because of the lube.
I haven't tried it yet, but it may work okay if you can keep lube away from the areas where the tube and the seal come into contact, but that may be a challenge when there's already lube everywhere... not just your ball sack but the areas of the ring up against your skin.
Maybe fit it with double-stick tape before any lube is even applied?

On a side note, I did notice that the XL Juicy also worked well with the Froehle large 'Hodenkondom', though it does lift it away from the pubic bone quite a bit due to the thickness of the base.

[asslicker061]

There is also a juicy XXL for larger tubes

[rossman]

It’s a good seal! I use it all the time.

[SFBallpumper]

There is also a juicy XXL for larger tubes

I couldn’t find the XXL on the Oxballs site, so I sent them a message. I’ll post here when I hear back from them.

[asslicker061]

Think I was seeing things that morning, or what I wanted to see, or what I hoped I saw. Haven't been able to see it again.

[SFBallpumper]

I heard back from the Oxballs guys. There’s only the regular Juicy and the XL. No other sizes.

[Bmjc85]

Not sure, if you guys know, but the Juicy XL ball/cock ring from OXBaLLs makes an awesome seal, personally at least!

Totally Agree

[brooklynphil00]

Not sure, if you guys know, but the Juicy XL ball/cock ring from OXBaLLs makes an awesome seal, personally at least!

Totally Agree

awesome!!! I reordered one recently and I noticed they made them more durable and comfy!!!

[rossman]

This is how I wear my pumping seals. I like the original one that comes with the pump but quality of pumptoys.com seals are now trash so this is what I came up with.

Ox balls on first then the MT3 seal!!