hanging pumped cocks

[prelude99]

I know this is hanging pumped cocks but I thought I would share what pumping has done to my not pumped soft girth. I happened to have a measuring tool around and put it to use!

What is your unpumped soft.

That IS my unpumped soft.

[Pumpforgirth2021]

I know this is hanging pumped cocks but I thought I would share what pumping has done to my not pumped soft girth. I happened to have a measuring tool around and put it to use!

What is your unpumped soft.

That IS my unpumped soft.

Oh ok, so what is the measurements?

[prelude99]

What is your unpumped soft.

That IS my unpumped soft.

Oh ok, so what is the measurements?

It measured 8.25" in circumference when soft. After having not pumped for a month.

[manson1111]

Been pumping all weekend, breaking pb on cam. I’m ready to get my hands on a monster tube, has anyone had them shipped to the uk?

[Pumpforgirth2021]

That IS my unpumped soft.

Oh ok, so what is the measurements?

It measured 8.25" in circumference when soft. After having not pumped for a month.

One good question when do you starting to see 8 inch girth unpumped?,... Is it when you start packing the 3 cylinder or 3.25 or 3.50?? Just looking at those measurements got me excited to get in the cylinders and order 3.25 after I pack the 3.

[prelude99]

I'd been working on my 4" cylinder and stepping down to the 3.5" and then back up to the 4" to generally pack the 3.5" completely and then 80%+ of the 4" only cock.

[BlkPumper]

That IS my unpumped soft.

Oh ok, so what is the measurements?

It measured 8.25" in circumference when soft. After having not pumped for a month.

Always impressive as shown

[Pumpforgirth2021]

I'd been working on my 4" cylinder and stepping down to the 3.5" and then back up to the 4" to generally pack the 3.5" completely and then 80%+ of the 4" only cock.

I think you misunderstood me Prelude99 my question was when you first hit 7 to 8 inch girth, what cylinders was you packing?

[stp]

Manson...looking good!

[prelude99]

I'd been working on my 4" cylinder and stepping down to the 3.5" and then back up to the 4" to generally pack the 3.5" completely and then 80%+ of the 4" only cock.

I think you misunderstood me Prelude99 my question was when you first hit 7 to 8 inch girth, what cylinders was you packing?

I started at 7" girth when hard. Currently experiencing girth over 8" when soft. I began showing those numbers after working my 4" first and stepped down to 3.5. This was the end of last year that I started doing that and my girth expanded greatly in a not pumped state.

To reach these levels the progress was use 3" or larger tubes only cock. Full package pumping did assist with the base girth initially but full package pumping isn't required beforehand anymore to create a decent seal.

I think I understood what you were asking but my details may not be coming across correctly. I only recently achieved this level of girth so the actions I took to get there and for it to read as permanent was with the 4" to 3.5" and back up again. Also in the beginning of my journey I had a 2.5 that broke in 2 days. A 2.75 that a friend broke after a few months, and a 3.5 that I never used. I loved pumping so much and truly wanted to only focus on my cock that I began using my 3.5 only cock which was quite difficult until I'd been in the tube for 30 minutes. This caused me to grow much bigger than I expected and bigger than most people expected at that time. So early on I used tubes too big and stayed dedicated to it and now those tubes are the things I start in.

[Pumpforgirth2021]

I'd been working on my 4" cylinder and stepping down to the 3.5" and then back up to the 4" to generally pack the 3.5" completely and then 80%+ of the 4" only cock.

I think you misunderstood me Prelude99 my question was when you first hit 7 to 8 inch girth, what cylinders was you packing?

I started at 7" girth when hard. Currently experiencing girth over 8" when soft. I began showing those numbers after working my 4" first and stepped down to 3.5. This was the end of last year that I started doing that and my girth expanded greatly in a not pumped state.

To reach these levels the progress was use 3" or larger tubes only cock. Full package pumping did assist with the base girth initially but full package pumping isn't required beforehand anymore to create a decent seal.

I think I understood what you were asking but my details may not be coming across correctly. I only recently achieved this level of girth so the actions I took to get there and for it to read as permanent was with the 4" to 3.5" and back up again. Also in the beginning of my journey I had a 2.5 that broke in 2 days. A 2.75 that a friend broke after a few months, and a 3.5 that I never used. I loved pumping so much and truly wanted to only focus on my cock that I began using my 3.5 only cock which was quite difficult until I'd been in the tube for 30 minutes. This caused me to grow much bigger than I expected and bigger than most people expected at that time. So early on I used tubes too big and stayed dedicated to it and now those tubes are the things I start in.

Wow thank you for the detaili explanation Prelude99, so it's not bad to skip tube size here and there from time to time, because I only packed the 2.25 1 to 2 times before I got 2.50x 8 and now I have a 3x9 so I'm gonna start in 2.50x8 and then move to 3 for 5 months then I'm go straight to 3 after 5 months. I too skipped couple of cylinders I started in the 1.79x9 Thickwall and now look where I'm at, I think most pumpers have a problem with balls getting stuck in bigger tubes but I never have that problem I can't wait get to 3.50 I would so happy

[whiz666]

A nice pumping session had while staying away in a hotel

[metopump]

A nice pumping session had while staying away in a hotel

Excellent hang. I love the bloat you have.

[stp]

Well done Whiz666. Impressive. How long is your dick and any pics of it erect/hard.

[TinyMe]

A nice pumping session had while staying away in a hotel

That’s enormous!