Page 111 of 262
Re: pumping bignlow
Posted: Fri Jun 22, 2018 4:41 am
by bignlow
2nd session early afternoon...
The cock is taking a bit of a beating in this bigger tube. better later in the week when the balls are filling up more but getting sore under the glans, hence the wider glans ring i cobbled up. I'll need some bigger rings for the big tubes as the cock seems to be fattening up nicely. I've got 25mm so probably need 28 or 30 and maybe 2 welded together so the skin doesn't leech between them. In the meantime i'll have to use what i can find.
bignlow
Re: pumping bignlow
Posted: Fri Jun 22, 2018 10:01 am
by Pump
Amazing results great hang and shape
Re: pumping bignlow
Posted: Fri Jun 22, 2018 3:34 pm
by baker08
cock might be taking a beating but damn it looks so plump.the step up in the diameter tubes is really filling out everything real well,progressive size step ups are the way to go for maximum ball length,maybe see you in the Jr before the weeks end.thanks for posting your newest updates.
Re: pumping bignlow
Posted: Fri Jun 22, 2018 4:56 pm
by bignlow
THanks Pump.
Baker,The bigger tubes are hard to pack and stretch in but to get any bigger i think i'll have to spend more time in them.
Start narrow after a rest but once i've worked my way up the tubes i need to stick to the bigger ones for longer. There was a time i'd have to pump away for quite a while before using the 12 but i've been in it most of this week, mainly because my 10 is now leaking so bad it's hard to get a decent pump out of it while i'm working but i've found out this week i can get away with the bigger tube better than i thought. Either i've been missing a trick or i'm a little bigger than i was.
That said, it's replacement is nearly finished.
The 12 is a 80 into 100, 3 1/8 into 4"
The 10 is a 74 into 90, 2 7/8 into 3 1/2"
The new tube is a bit of a hybrid. Made from what i had lying about in the cupboard, i didn't have enough 90 for length so sleeved it over with some 100, 4", so this will now be a 74 into 100, 2 7/8 into 4". It goes out to 4" well down the tube so the first part of it will be as the old tube 10 but once i pull down the tube the balls will have some extra room to expand at the bottom, hopefully creating more teardrop shape which, again, hopefully will help once in the junior.
This is my old patched up 10 with it's replacement.
It's come out a bit longer which is no bad thing. More oil that wil stay warmer longer and a bigger air gap to vac out. Might be a job hiding it while i'm working though !
And this is the new tube all but done. Finished it off this morning. It now has the weekend to set and it should be fit for Monday morning.
Friday and a session in the 12 later this morning and then the junior this afternoon is the plan.
bignlow
Re: pumping bignlow
Posted: Fri Jun 22, 2018 5:12 pm
by baker08
You have been busy with the replacement,it has good displacement and i can see something else in the background because of the placement.
Re: pumping bignlow
Posted: Fri Jun 22, 2018 7:25 pm
by Metal_Micky
You've probably mentioned it before but save me looking... what/where do you get the nice comfy coloured seals from???
Re: pumping bignlow
Posted: Fri Jun 22, 2018 8:10 pm
by bignlow
Very good Baker. like that.....
MM, Pet shop. They're the rubber rings for dogs. It's mentioned i'm sure somewhere in the last 2 or 3 pages unless i PM'd someone on how to do it. PM me if you can't find it.
First session today around hour and twenty mins.
Today's chip shop bulge....
Bignlow
Re: pumping bignlow
Posted: Fri Jun 22, 2018 8:54 pm
by REBinNYC
What a journey you're on! Inspiring so many of us and informative as well....really appreciate you being so diligent about sharing your efforts.
Re: pumping bignlow
Posted: Fri Jun 22, 2018 11:09 pm
by bignlow
Thanks Reb, glad you like it.
Dinner done with and back in the 12 for 30-35 mins. A bit of a break to re-warm the oil and have a ciggie in the yard.
and now in the junior....
See what happens by close of play...
bignlow
Re: pumping bignlow
Posted: Sat Jun 23, 2018 10:01 pm
by bignlow
Around an hour in the junior late afternoon.
Going to take some filling that bugger.....
And the quick tea time pint down the pub before tea bulge
The boys have had some stick this week and a bit of an ache around the hernia site so the weekend off now till dinner on Monday.
Bignlow
Re: pumping bignlow
Posted: Sun Jun 24, 2018 11:47 am
by FamilyGuy
Great shots Bl, the hang and fullness!
Re: pumping bignlow
Posted: Sun Jun 24, 2018 1:46 pm
by Pumping Now
I had a MT jr for a while. It was too uncomfortable. A curved opening would be nice, instead of that flat surface & square corner against the pubes.
Your balls in the sunny outside pic are enviable!
Re: pumping bignlow
Posted: Wed Jun 27, 2018 4:03 am
by bignlow
Family Guy and Pumping Now, thanks for the comments.
Everything has had a rest this weekend, Been a bit full on this last couple of weeks.
This was Saturday night.
Extended the weekend into Monday so today has been the first day back and in my new tube. I'll put those up in the morning, bit busy at work and busy tonight, the race car here is out on Sunday and still not ready.
Bignlow
Re: pumping bignlow
Posted: Wed Jun 27, 2018 4:09 pm
by bignlow
Back to it Tuesday, busy busy at work so just an hour over dinner in the new version of my tube 10, a sort of 10 1/2.
One hour and just short of getting into the bigger main chamber at the bottom.
And end of a busy night with the race car....
Probably about the same today. Nice and sunny and warm so naked all day again but busy.
Bignlow
Re: pumping bignlow
Posted: Thu Jun 28, 2018 4:13 pm
by bignlow
Wednesday went to hour and a half, part in the office and part in the workshop. Working with the tube on isn't the best for pumping but it's pumping so better than not doing.
A little further down the tube yesterday.
had to get out at some point, had a couple of errands to run.
End of the night.
Oh, and while i was out i got myself some new shorts....
By Friday chippy lady won't be able to concentrate on wrapping up the dinners.....
Bignlow