Diagram for taping for foreskin restoring?
Posted: Tue Aug 09, 2005 12:58 am
Anyone got any pictures of how to do the taping on your cock for starting to recover the foreskin? I've recently decided to do this after researching the subject on the internet.
I've got a cut 6 inch dong. I think it's cut fairly loose, when my dick is soft (3-3.5 inches), I can easily pull the skin almost all the way over the head of my dick. With a boner, I might make it 1/4 of the way over the head. Is that considered tight or loose skin? I think I've got quite a ways to go before getting room for a tugger to fit.
Most sites I find say yes their product can do this better than any other (or words to that effect), but they don't show pictures or the way you tape it. I guess money is a factor here.
But can anyone point me to pictures of the best taping method? I've heard of this T tape thing but don't see how I'd attach weight to it.
I've been using some 1 inch wide medical tape I got, but it pulls off in 10 minutes or less most of the time. I just now managed to tape it right, it's been hanging on my dick for nearly an hour with about a pound of weight.
I'll wrap 1-2 wraps around my dick right behind the head (semi-hard), then tape in a seperate loop going forward in front of the head so I have something to hang the weight on. Then wrap more tape around my dick to keep that in place. This tape (Johnson & Johnson) doesn't seem to stick to itself very well. I'll put little pieces of paper towel on the tape where it goes over the head of my dick so it doesn't stick to it. I learned that one pretty quickly!
But even though it's lasted nearly an hour this time (after about 6 tries!), I always feel like it's not far from pulling off again.
Is 1 inch tape too wide? I don't want my nutsack hair growing out the side of my dick once I'm done.
Tips? Pictures? Ideas?
I've got a cut 6 inch dong. I think it's cut fairly loose, when my dick is soft (3-3.5 inches), I can easily pull the skin almost all the way over the head of my dick. With a boner, I might make it 1/4 of the way over the head. Is that considered tight or loose skin? I think I've got quite a ways to go before getting room for a tugger to fit.
Most sites I find say yes their product can do this better than any other (or words to that effect), but they don't show pictures or the way you tape it. I guess money is a factor here.
But can anyone point me to pictures of the best taping method? I've heard of this T tape thing but don't see how I'd attach weight to it.
I've been using some 1 inch wide medical tape I got, but it pulls off in 10 minutes or less most of the time. I just now managed to tape it right, it's been hanging on my dick for nearly an hour with about a pound of weight.
I'll wrap 1-2 wraps around my dick right behind the head (semi-hard), then tape in a seperate loop going forward in front of the head so I have something to hang the weight on. Then wrap more tape around my dick to keep that in place. This tape (Johnson & Johnson) doesn't seem to stick to itself very well. I'll put little pieces of paper towel on the tape where it goes over the head of my dick so it doesn't stick to it. I learned that one pretty quickly!
But even though it's lasted nearly an hour this time (after about 6 tries!), I always feel like it's not far from pulling off again.
Is 1 inch tape too wide? I don't want my nutsack hair growing out the side of my dick once I'm done.
Tips? Pictures? Ideas?