How do I choose a pump for the balls?

[Bitropler]

Before getting here I already have a pump. But it's electric and it doesn't work with the balls.

I wonder if you could help me choose please. What should I look for? I don't want to make a mistake. Thank you.

[SFBallpumper]

I posted this elsewhere on the net. I hope that you find it useful.
==========

Here are my personal recommendations for pumping your cock, or your cock & balls together. They're based on my experience over the years. A great guy got me started pumping and I like to pay it forward.

(Of course, you, not me, are entirely responsible for what you do. Use common sense.)

Basic Info:
As you’ve found, the Newart Forums website (https://forums.newart.com) is a great resource. Membership is free and there are no paid upgrade memberships. Search their site. I'm sure that your questions have been asked before. Be aware that the site has had some big crashes, destroying some photos in the process. Asking the moderator for access to them won't help. The photos are just gone.

There's also a great video: "Cock and Ball Pumping 101--How to pump." It's here:
https://xhamster.com/videos/cock-and-ba ... mp-xho0MWm
Note that he uses two-stage cylinders that can be very expensive. I use regular cylinders.

Equipment:
You need a hand pump, some tubing, a fitting to go on the tubing, and a cylinder. I picked these particular things because they're sturdy, durable, and well-made. I hate the crap that falls apart. The things listed here are also a lot more affordable than stuff from other suppliers.

Hand Pump: Harbor Freight—About $25
This metal pump includes a gauge. You don't need the miscellaneous stuff that it comes with. You just need the pump. Don't get the insides of this pump wet by using it to suck up water. It will stop working. Been there, done that. This one is rugged metal. Every single plastic or aluminum hand pump that I've ever had eventually cracked and became unusable. A lot of adult stores and sites sell a pump that's very similar to this one from Harbor Freight for two or three times the price.
https://www.harborfreight.com/brake-ble ... 63391.html

Tubing and Quick Connect Fitting: LeLuv brand—$10.99 to $14.99
They include 12 to 36 inches of tubing. Get the 24 inch if they have it in stock. Longer tubing will take more hand pumping to vacuum out the air in it. Shorter tubing isn't convenient to use. The fitting is pretty standard and can be used with cylinders from a lot of different manufacturers. Before I found this combination, I had to buy tubing in 5 foot rolls, and then meet a $25 minimum order just to get an inexpensive fitting.
https://www.kodidistributing.com/produc ... ose-length

Cylinder: LeLuv brand—$34.99 to $110.99
The price depends on the size. This is yet more sturdy and durable equipment. This is direct from the distributor, Kodi Distributing. LeLuv has cylinders in two lengths, 9 inches long or 12 inches long. They have diameters from 1.35 inches to 5 inches and just about everything in between. Unless you've already got a really really really long dick, stick with the 9 inch. You won't gain 3 inches with a longer tube and again, it will take more hand pumping to vacuum out the air in it. Amazon has only a few sizes of these LeLuv cylinders and they aren't cheaper.
https://www.kodidistributing.com/produc ... 3275214929

What size?
The next question is always, "What size cylinder do I get?" The key to picking the right size isn't to impress the folks making the cylinder. It's to find something that fits. You won't magically get huge with a huge cylinder. You should be coaxing your cock and balls to slowly get to the very next size.

Kodi Distributing has a simple guide:
https://www.kodidistributing.com/pages/ ... size-chart

Instructions:
1. Slide the tubing onto the hand pump. You don't need any adapters or clamps.
2. Click the fitting onto the cylinder.
3. Lube your family jewels and the inside of the cylinder. Lubing your pubes will help. Lubed pubes lay flat more easily, giving you a better seal.
4. Put your family jewels into the cylinder and then, using the hand pump, slowly generate a vacuum inside the cylinder.

Watch the gauge. Start with a LOW pressure level (1-2 inHg) for your first sessions and then SLOWLY work your way up to 4-5 inHg over the next several sessions. Starting sessions should not be marathons--10 minutes max.

Immediately increasing the pressure or the length of time won't help you get bigger faster. It will only cause bruising and blisters and can cause permanent damage. If you want to see the damage, Google the term "Petechiae." It's not pretty.

As a very wise pumper advised, "Warm, slow, often... easy."