First few pumps

[Midwestanbe]

I just got into this with my SO. I have the doc Johnson pump but it’s not big enough so I’ve been using my SO cock pump but am looking to up the cylinder size to really get results.

[crakerjack]

Potential is there. Bigger cup = bigger results. Welcome to the Forum...

[XBR]

Welcome to the world of pumping, it's a fantastic hobby to share. As regards bigger cups, we have found that the bigger cups are really expensive. So l make my own, the results are mixed, but with each proto the results get better & better. I have just finished the latest one, we both like getting as big results as possible.
l have high hopes for it, if it works l will post some pics.

[Bigbals244]

Looking just fine.

[imsnowman]

Even the smaller cup looks great! Thanks for sharing with us.

[Gb47]

So perfect I love

[roshnikhanna]

so nice.

[blazinballa]

Welcome to the world of pumping, it's a fantastic hobby to share. As regards bigger cups, we have found that the bigger cups are really expensive. So l make my own, the results are mixed, but with each proto the results get better & better. I have just finished the latest one, we both like getting as big results as possible.
l have high hopes for it, if it works l will post some pics.

How did u make that? Wat size cylinder did u start with?

[Bgemi10]

Welcome to the world of pumping, it's a fantastic hobby to share. As regards bigger cups, we have found that the bigger cups are really expensive. So l make my own, the results are mixed, but with each proto the results get better & better. I have just finished the latest one, we both like getting as big results as possible.
l have high hopes for it, if it works l will post some pics.

Froehle seems to make some great pumps

https://www.froehle.de/en/mobile/category/8-vaginapumps

[2point2bar]

thank you, looking great.

[XBR]

" How did u make that? Wat size cylinder did u start with?"

I think it was a 125mm acrylic tube, l cut and glued the end cap and drilled it for a brass adapter. To take the vacuum tube, l think l will start using quick releases on the next protos.

Then l shaped the business end, using a heatgun and a simple wooden former wearing rigger gloves, so l could hold it whilst it cooled. It works OK but needs the addition of a probe, to create the size and shape that we are after. I hope that makes sense. (A bit like a rosebud cup/tube)

"Froehle seems to make some great pumps"

Yeah thanks, we have a Froehle cup, and it's great but we need a bigger cup for the bigger results.

[imsnowman]

Thank you for the explanation XBR

[Bgemi10]

" How did u make that? Wat size cylinder did u start with?"

I think it was a 125mm acrylic tube, l cut and glued the end cap and drilled it for a brass adapter. To take the vacuum tube, l think l will start using quick releases on the next protos.

Then l shaped the business end, using a heatgun and a simple wooden former wearing rigger gloves, so l could hold it whilst it cooled. It works OK but needs the addition of a probe, to create the size and shape that we are after. I hope that makes sense. (A bit like a rosebud cup/tube)

"Froehle seems to make some great pumps"

Yeah thanks, we have a Froehle cup, and it's great but we need a bigger cup for the bigger results.

I remember coming across another site with larger cups but I can't remember now. I'll see if I can find it for you

[asslicker061]

Like your ingenuity.