Hi All,
I was wondering if anyone out there can help.
I have a PA and have been stretching it up over some time. I am currently wearing a 9mm diameter curved barbell, and should be getting to 10mm quite soon. The current barbell is fitted with 12mm diameter balls at each end.
As I am sure many of you already know the problem is that availability of jewellery gets limited as you increase in size. I have used bodyjewelleryshop in the UK for several years but they do not stock what I am now looking for.
If you recall Lady Madeleine, she often wore straight barbells in her nipples and labia that had round disks on the end; rather than balls. Does anyone know of a supplier of these discs or barbells fitted with them? My idea is to substitute a disc for the ball at the end of the barbell coming out of my shaft under the foreskin, and maybe fitting an oversize ball the other end.
Suggestions or links for suppliers would be gratefully received.
Regards Grumpy
Jewellery Suppliers
Moderator: bigray57
- grumpy2
- Posts: 210
- Joined: Sat Aug 27, 2005 11:24 pm
Re: Jewellery Suppliers
Hi All,
Sorry to bump this post, but anyone with a PA over 5mm must have found a lack of choice of metalwork out there.
I'm not wanting any adverts, just wanting some originality, so where did you all get your larger gauge Princebells, BCRs etc?
Regards, Grumpy
Sorry to bump this post, but anyone with a PA over 5mm must have found a lack of choice of metalwork out there.
I'm not wanting any adverts, just wanting some originality, so where did you all get your larger gauge Princebells, BCRs etc?
Regards, Grumpy
-
- Posts: 70
- Joined: Sun Aug 10, 2014 1:08 pm
- Location: Des Moines Iowa
- Contact:
Re: Jewellery Suppliers
I get most of mine from The Chain Gang or on Amazon.
Beginning 4.75" girth 5" length
-
- Posts: 70
- Joined: Sun Aug 10, 2014 1:08 pm
- Location: Des Moines Iowa
- Contact:
- grumpy2
- Posts: 210
- Joined: Sat Aug 27, 2005 11:24 pm
Re: Jewellery Suppliers
Thanks tdogluv,
I hadn't looked outside of the UK and the EU. Foolish of me
Regards, Grumpy
I hadn't looked outside of the UK and the EU. Foolish of me
Regards, Grumpy
-
- Posts: 66
- Joined: Mon Jun 06, 2005 5:19 am
-
- Posts: 4
- Joined: Sat Dec 21, 2013 3:42 pm
-
- Posts: 106
- Joined: Tue Feb 05, 2013 12:23 am
Re: Jewellery Suppliers
Try Tribalectic maybe ?
- JRB
- Posts: 10
- Joined: Thu Feb 02, 2023 9:10 pm
Re: Jewellery Suppliers
Chaingang in UK, Painful Pleasures in US and Wildcat.eu all carry up to 19mm in a screw-in CBR (called a monster ring) and up to 15mm in ‘tribal dream ring’ which is a segment ring in 2 part with a screw (incidentally these are good if you want a smaller inner diameter).
For barbells over 10mm, you’ll probably need to go custom. I have used Badass Workroom (you can find them at their website or through Etsy) for a custom bent barbell of 15mm gauge and for a ‘horseshoe’ circular barbell. The work is good quality and available in steel or titanium.
Good Luck!
For barbells over 10mm, you’ll probably need to go custom. I have used Badass Workroom (you can find them at their website or through Etsy) for a custom bent barbell of 15mm gauge and for a ‘horseshoe’ circular barbell. The work is good quality and available in steel or titanium.
Good Luck!
-
- Posts: 81
- Joined: Mon Jan 27, 2020 6:23 pm
Re: Jewellery Suppliers
Hello, in Germany we have a supplier who is specialized in crafting handmade piercing jewelry. Every piece is customade. Not cheap, Bit worth every Euro.
Google skintech piercing
Google skintech piercing
-
- Posts: 23
- Joined: Tue Feb 15, 2011 2:31 am
Re: Jewellery Suppliers
I know painful pleasures in the US has flat discs I just bought some. Look out for the 2.0 thread size
-
- Posts: 129
- Joined: Wed Oct 28, 2015 4:56 pm
Re: Jewellery Suppliers
Just a word of warning about some of the stuff out there in larger gauges. The screw-in balls should have good diameter, robust threaded posts. I've been caught out in the past as the 10mm (000 ga) horseshoe I bought had very thin threaded posts, and the threads crossed very easily. When that happens the ball falls off and there's only one thing to be done and that's throw the whole thing away.
K
K
-
- Posts: 283
- Joined: Sun Jul 05, 2020 1:17 am
Re: Jewellery Suppliers
Once you're at 10mm, the two-piece, bolt-together cock or ball rings might be a practical option. They run a bit larger in diameter than specific PA rings, which some might consider to be an advantage,
-
- Posts: 14
- Joined: Mon Dec 18, 2006 9:46 pm
Re: Jewellery Suppliers
I've a selection for sale some huge.
im interested in cock and ball pumping, CBT,
Ball suspension hanging from my balls.
Ball suspension hanging from my balls.