That IS my unpumped soft.
hanging pumped cocks
Moderator: bigray57
- prelude99
- Posts: 4197
- Joined: Tue Sep 19, 2006 8:43 am
- Contact:
Re: hanging pumped cocks
Biggest cock only pumping!
10"+ X 13.5"+ MegaHUGE is my way, anything less is just HUGE, lol!
10"+ X 13.5"+ MegaHUGE is my way, anything less is just HUGE, lol!
-
- Posts: 106
- Joined: Sat Jul 03, 2021 12:48 am
Re: hanging pumped cocks
prelude99 wrote: ↑Sun Oct 30, 2022 1:24 pmThat IS my unpumped soft.
Oh ok, so what is the measurements?
- prelude99
- Posts: 4197
- Joined: Tue Sep 19, 2006 8:43 am
- Contact:
Re: hanging pumped cocks
It measured 8.25" in circumference when soft. After having not pumped for a month.Pumpforgirth2021 wrote: ↑Sun Oct 30, 2022 5:47 pm
Oh ok, so what is the measurements?
Biggest cock only pumping!
10"+ X 13.5"+ MegaHUGE is my way, anything less is just HUGE, lol!
10"+ X 13.5"+ MegaHUGE is my way, anything less is just HUGE, lol!
-
- Posts: 157
- Joined: Fri Oct 22, 2010 4:46 am
Re: hanging pumped cocks
Been pumping all weekend, breaking pb on cam. I’m ready to get my hands on a monster tube, has anyone had them shipped to the uk?
-
- Posts: 106
- Joined: Sat Jul 03, 2021 12:48 am
Re: hanging pumped cocks
One good question when do you starting to see 8 inch girth unpumped?,... Is it when you start packing the 3 cylinder or 3.25 or 3.50?? Just looking at those measurements got me excited to get in the cylinders and order 3.25 after I pack the 3.
- prelude99
- Posts: 4197
- Joined: Tue Sep 19, 2006 8:43 am
- Contact:
Re: hanging pumped cocks
I'd been working on my 4" cylinder and stepping down to the 3.5" and then back up to the 4" to generally pack the 3.5" completely and then 80%+ of the 4" only cock.
Biggest cock only pumping!
10"+ X 13.5"+ MegaHUGE is my way, anything less is just HUGE, lol!
10"+ X 13.5"+ MegaHUGE is my way, anything less is just HUGE, lol!
- BlkPumper
- Posts: 702
- Joined: Sat Apr 05, 2014 8:01 am
- Location: DMV
- Contact:
Re: hanging pumped cocks
Always impressive as shown
-
- Posts: 106
- Joined: Sat Jul 03, 2021 12:48 am
Re: hanging pumped cocks
I think you misunderstood me Prelude99 my question was when you first hit 7 to 8 inch girth, what cylinders was you packing?
-
- Posts: 112
- Joined: Fri Feb 29, 2008 10:35 am
Re: hanging pumped cocks
Manson...looking good!
- prelude99
- Posts: 4197
- Joined: Tue Sep 19, 2006 8:43 am
- Contact:
Re: hanging pumped cocks
I started at 7" girth when hard. Currently experiencing girth over 8" when soft. I began showing those numbers after working my 4" first and stepped down to 3.5. This was the end of last year that I started doing that and my girth expanded greatly in a not pumped state.Pumpforgirth2021 wrote: ↑Mon Oct 31, 2022 10:13 am
I think you misunderstood me Prelude99 my question was when you first hit 7 to 8 inch girth, what cylinders was you packing?
To reach these levels the progress was use 3" or larger tubes only cock. Full package pumping did assist with the base girth initially but full package pumping isn't required beforehand anymore to create a decent seal.
I think I understood what you were asking but my details may not be coming across correctly. I only recently achieved this level of girth so the actions I took to get there and for it to read as permanent was with the 4" to 3.5" and back up again. Also in the beginning of my journey I had a 2.5 that broke in 2 days. A 2.75 that a friend broke after a few months, and a 3.5 that I never used. I loved pumping so much and truly wanted to only focus on my cock that I began using my 3.5 only cock which was quite difficult until I'd been in the tube for 30 minutes. This caused me to grow much bigger than I expected and bigger than most people expected at that time. So early on I used tubes too big and stayed dedicated to it and now those tubes are the things I start in.
Biggest cock only pumping!
10"+ X 13.5"+ MegaHUGE is my way, anything less is just HUGE, lol!
10"+ X 13.5"+ MegaHUGE is my way, anything less is just HUGE, lol!
-
- Posts: 106
- Joined: Sat Jul 03, 2021 12:48 am
Re: hanging pumped cocks
prelude99 wrote: ↑Mon Oct 31, 2022 9:01 pmI started at 7" girth when hard. Currently experiencing girth over 8" when soft. I began showing those numbers after working my 4" first and stepped down to 3.5. This was the end of last year that I started doing that and my girth expanded greatly in a not pumped state.Pumpforgirth2021 wrote: ↑Mon Oct 31, 2022 10:13 am
I think you misunderstood me Prelude99 my question was when you first hit 7 to 8 inch girth, what cylinders was you packing?
To reach these levels the progress was use 3" or larger tubes only cock. Full package pumping did assist with the base girth initially but full package pumping isn't required beforehand anymore to create a decent seal.
I think I understood what you were asking but my details may not be coming across correctly. I only recently achieved this level of girth so the actions I took to get there and for it to read as permanent was with the 4" to 3.5" and back up again. Also in the beginning of my journey I had a 2.5 that broke in 2 days. A 2.75 that a friend broke after a few months, and a 3.5 that I never used. I loved pumping so much and truly wanted to only focus on my cock that I began using my 3.5 only cock which was quite difficult until I'd been in the tube for 30 minutes. This caused me to grow much bigger than I expected and bigger than most people expected at that time. So early on I used tubes too big and stayed dedicated to it and now those tubes are the things I start in.
Wow thank you for the detaili explanation Prelude99, so it's not bad to skip tube size here and there from time to time, because I only packed the 2.25 1 to 2 times before I got 2.50x 8 and now I have a 3x9 so I'm gonna start in 2.50x8 and then move to 3 for 5 months then I'm go straight to 3 after 5 months. I too skipped couple of cylinders I started in the 1.79x9 Thickwall and now look where I'm at, I think most pumpers have a problem with balls getting stuck in bigger tubes but I never have that problem I can't wait get to 3.50 I would so happy
-
- Posts: 36
- Joined: Tue Dec 13, 2011 1:04 am
-
- Posts: 361
- Joined: Fri Apr 23, 2010 8:16 pm
- Location: Northwest FL
-
- Posts: 112
- Joined: Fri Feb 29, 2008 10:35 am
Re: hanging pumped cocks
Well done Whiz666. Impressive. How long is your dick and any pics of it erect/hard.
- TinyMe
- Posts: 2918
- Joined: Tue Feb 19, 2019 12:11 am
- Location: Hampshire