Hello, I have been reading a lot on these forums and it seems like many say length is next to impossible through pumping. I will try anyway because other methods (hanging, hand stretching) haven't seemed to work. I can hang 20 lbs off of my dick for 1-2 hours at a time and feel no stretch/fatigue. Seems I have a pretty strong dick and attaching a hanger to hang more weight has just been painful so I give up for now. My main goal is length, and girth second. Right now I cycle pump between 5-13 HG for 2 sets of 20-30 minutes.
My girth is 5 1/8 inches and I was using an elliptical 1.8 x 2.1 x 9 cylinder from VacuTech but I found that it created too much fluid. I ordered a 1.75 x 10 cylinder and pack it in about 20-30 minutes (could pack it quicker but take cylinder off at 20 mins). There is less fluid and discoloration. I hope to pack the cylinder and then keep Hg cycling to induce length gains. My penis is 6 inches non bone pressed and I find it much too small so that's why I want length.
Uploaded old pictures of me in the elliptical. Will post new ones in 1.75 soon. Thank you
Edit: Also want to mention that I am really lean but I still have 1.5 inches of fat pad. My bone pressed erection is 7 1/2 and my non bone pressed is 6.
Looking for length
Moderator: bigray57
-
- Posts: 9
- Joined: Thu Apr 06, 2017 7:07 am
Looking for length
Last edited by Aedens on Tue Apr 18, 2017 6:29 am, edited 1 time in total.
-
- Posts: 9
- Joined: Thu Apr 06, 2017 7:07 am
Re: Looking for length
So here is the 1.75 cylinder. I am getting to 8 1/2 inches in it. In the elliptical, I was getting to 8 7/16, so a bit further than my 1.75.
-
- Posts: 89
- Joined: Fri Sep 12, 2014 12:31 pm
Re: Looking for length
Nice looking dick anyway - and it will surely grow.
-
- Posts: 9
- Joined: Thu Apr 06, 2017 7:07 am
Re: Looking for length
Thank you. I hope so as well but I think I may have hit a wall already. My max in the tube is now 8 10/16. This took me 10-15 hg cycling. I went up to 20 hg but it just seems to enlarge the head more rather than pull the shaft further in the tube. I did this over 40 mins and felt no pain. I wish I knew how much force/lb there was pulling on my penis. So at say 15 hg.. is there a way to make this equivalent to hanging weight? 15 hg = like hanging X pounds. I've tried googling this but can't find the answer. If anyone knows or has an idea, please let me know. Thanks
-
- Posts: 9
- Joined: Thu Apr 06, 2017 7:07 am
Re: Looking for length
So unfortunately I think I wasted my money ordering the 1.75 cylinder and may have to go back to my 1.8 x 2.1 elliptical. I am packing the 1.75 all the way to the head and if you see in the picture, the head is packing a lot too. This creates so much push/friction (not much pain or discomfort though) against the cylinder that even with a lot of vaseline, I can't get the penis to move anymore even at 20 + hg.
- prelude99
- Posts: 4197
- Joined: Tue Sep 19, 2006 8:43 am
- Contact:
Re: Looking for length
Definitely time to step into a larger tube. Your cock will thank you!
Biggest cock only pumping!
10"+ X 13.5"+ MegaHUGE is my way, anything less is just HUGE, lol!
10"+ X 13.5"+ MegaHUGE is my way, anything less is just HUGE, lol!
-
- Posts: 9
- Joined: Thu Apr 06, 2017 7:07 am
Re: Looking for length
So I've been stuck at 8.10 inches in the 1.8 x 2.1 elliptical for a month total (I took a break in-between to use my 1.75 cylinder) and just hit 8.11 today which might not seem like much but is actually huge. 1/18 of an inch is actually way more than I thought once I actually marked it with a sharpie. So that's a plateau of 1+ month past.
Right now I am pumping EVERYDAY for 2 x 30 minute sets but I want to stay in the tube longer and will soon. Thing is, today I was burning/uncomfortable even at 5 hg and I cycle up to 20 hg near the end of my sets. AKA I think my penis is telling me to take a day off. I usually pump up to 5 hg the second I enter the tube with no discomfort or pain. It's literally my starting Hg. So if 5 Hg today was giving me discomfort, then maybe a break or just less intense tomorrow. I don't like taking days off though because I find when I come back, I get discoloration/bruising.
Pics in pump and flaccid.
Right now I am pumping EVERYDAY for 2 x 30 minute sets but I want to stay in the tube longer and will soon. Thing is, today I was burning/uncomfortable even at 5 hg and I cycle up to 20 hg near the end of my sets. AKA I think my penis is telling me to take a day off. I usually pump up to 5 hg the second I enter the tube with no discomfort or pain. It's literally my starting Hg. So if 5 Hg today was giving me discomfort, then maybe a break or just less intense tomorrow. I don't like taking days off though because I find when I come back, I get discoloration/bruising.
Pics in pump and flaccid.
Last edited by Aedens on Tue Apr 18, 2017 5:52 am, edited 1 time in total.
-
- Posts: 9
- Joined: Thu Apr 06, 2017 7:07 am
Re: Looking for length
For those who might see the scar at the base (pumping redness makes it appear way more), I did get ligament surgery. My insecurities got the best of me and some people do have higher exit points and so cutting the ligaments can increase erect/flaccid (hence people trying to stretch the ligaments through hanging and such). I thought I might get 'lucky' and gain that way. After 7 years of PE, I still had no solid length gains so, with a bit of extra cash, and massive insecurity, I did the surgery. I gained NOTHING other than the scars. Do I regret it? I guess? But there's nothing I can do, and at the time it was very important to me. So while it's a lot of money gone and some scar tissue, I'm pretty sure I feel worse paying $15 for a burger at some crappy place last week.
In other words, if I hadn't done the surgery, I would have most likely continued thinking "what if?" and that would drive me crazy. Anyway, that's the story. Now more pumping!
In other words, if I hadn't done the surgery, I would have most likely continued thinking "what if?" and that would drive me crazy. Anyway, that's the story. Now more pumping!
-
- Posts: 9
- Joined: Thu Apr 06, 2017 7:07 am
Re: Looking for length
So I am pretty pale which makes my penis look even more discolored from the pumping. Looks less discolored in person than the picture. Either way, after I am done all pumping, I hope the discoloration does go down a bit.
I have been reaching my new record of 8.11/16 inches in the tube for 4 days now. My NBPFSL unpumped is also 6 1/2 inches now all the time rather than 6 when I started and recently 6 1/4. My EL is up by ~~0.375 inches so I am now NBPEL 6 1/8 from 5 3/4. This could be weight loss/fat pad fluctuations. Zero girth gains in 2 + months. Not much else to report. Thanks
I have been reaching my new record of 8.11/16 inches in the tube for 4 days now. My NBPFSL unpumped is also 6 1/2 inches now all the time rather than 6 when I started and recently 6 1/4. My EL is up by ~~0.375 inches so I am now NBPEL 6 1/8 from 5 3/4. This could be weight loss/fat pad fluctuations. Zero girth gains in 2 + months. Not much else to report. Thanks
-
- Posts: 28
- Joined: Thu Dec 23, 2004 11:26 am
Re: Looking for length
hi,
How do you pump to such high pressures and not have pain at the base from the cylinder digging into your skin?
How do you pump to such high pressures and not have pain at the base from the cylinder digging into your skin?
-
- Posts: 331
- Joined: Sat May 17, 2014 12:06 am
- Location: London
Re: Looking for length
Check out my first thread I went from that to now getting to 9.5
24 year old. Original size: 6.5 x 5 (4.5 mid) Current (BPEL): 10 x 6.5 (6 mid) MONSTER COCK
PUMPED: 10 x 10 (8.5 mid)
PUMPED: 10 x 10 (8.5 mid)