How do I develop a huge cock head?
Moderator: bigray57
-
- Posts: 493
- Joined: Thu Apr 03, 2014 7:44 am
How do I develop a huge cock head?
I've seen some pictures of guys with huge cock heads. This is something I definitely want to go for. One of the guys cock head had to be at least twice as big around as his shaft. Great look. Any ideas on how to develop a huge cock head?
-
- Posts: 156
- Joined: Thu Jun 25, 2015 6:31 am
- Location: Illinois
Re: How do I develop a huge cock head?
Massages would be a good start.
-
- Posts: 11
- Joined: Fri May 13, 2005 9:24 am
- Location: x0||||||
Re: How do I develop a huge cock head?
https://www.pumptoys.com/catalog/All-Pr ... r-110.html
This tube - w0rth the m0ney! It can 1ast f0rever with care - s0rry ab0ut my weird writing, my keyb0ard is breaking
This tube - w0rth the m0ney! It can 1ast f0rever with care - s0rry ab0ut my weird writing, my keyb0ard is breaking
- costa
- Posts: 38
- Joined: Fri Aug 17, 2007 5:55 pm
Re: How do I develop a huge cock head?
I am working on the same, tried different methodes and found something what works very well.
It is a pair of sturdy silicone sleeves. You can wear for hours, The glans gets thicker and stays that way for some time after you removed the sleve.
I also use this for not getting a doughnut while pumping.
sleve shown after 2 hour wear sleve covered by forskin penis relaxed here during a pumping session - 21 cm cylinder with 5 cm extension 6.5 cm diameter this is what you want, tried a lot of different things, this is best. This is a metal ring what can be worn 24/7, feels nice but for best results see above
It is a pair of sturdy silicone sleeves. You can wear for hours, The glans gets thicker and stays that way for some time after you removed the sleve.
I also use this for not getting a doughnut while pumping.
sleve shown after 2 hour wear sleve covered by forskin penis relaxed here during a pumping session - 21 cm cylinder with 5 cm extension 6.5 cm diameter this is what you want, tried a lot of different things, this is best. This is a metal ring what can be worn 24/7, feels nice but for best results see above
-
- Posts: 156
- Joined: Thu Nov 10, 2016 7:59 pm
Re: How do I develop a huge cock head?
And name of that cocksleeve? or link?
- costa
- Posts: 38
- Joined: Fri Aug 17, 2007 5:55 pm
Re: How do I develop a huge cock head?
got mine at aliexpress.
look for:
R&J 2pcs/set Silicone Sex Product for Men Penis Cock Ring Sex Product for Men Foreskin Ring Protection Cock Rings Q224
€ 6,45
look for:
R&J 2pcs/set Silicone Sex Product for Men Penis Cock Ring Sex Product for Men Foreskin Ring Protection Cock Rings Q224
€ 6,45
- colchesterbloke
- Posts: 180
- Joined: Mon Mar 27, 2006 8:22 pm
- Location: UK - Farnham border with Aldershot.
Re: How do I develop a huge cock head?
Love the look of that metal ring, was that from the same place?
-
- Posts: 53
- Joined: Sat Dec 26, 2009 5:38 pm
Re: How do I develop a huge cock head?
You can also try a mushroom head cylinder https://thickwall.co.uk/shop/mushroom-p ... room-head/
They will even make the length of each section to your requirements!
They will even make the length of each section to your requirements!
-
- Posts: 493
- Joined: Thu Apr 03, 2014 7:44 am
Re: How do I develop a huge cock head?
Thanks all for the great suggestions. For me and my pumping habits, I think a variation on the mushroom head tube would be best for me. My goal is to get my cock head a great deal thicker than my shaft; I really love the look of a disproportionately huge cock head. So I will experiment with building my own tube till I get it right. Then I'll look into buying one that's all shiny and classy looking. Again, thanks for all the help.
- costa
- Posts: 38
- Joined: Fri Aug 17, 2007 5:55 pm
Re: How do I develop a huge cock head?
yes, aliexpress is much cheaper then the sex stores here in Spain.
after 5 hours wear just installed after 30 min just installed after 30 min all this is with out any arrousal and a flacid penis
after 5 hours wear just installed after 30 min just installed after 30 min all this is with out any arrousal and a flacid penis
- costa
- Posts: 38
- Joined: Fri Aug 17, 2007 5:55 pm
Re: How do I develop a huge cock head?
you can also combine a thinner sleeve and a few light cock rings for some slight stretching and head expansion.
The outer diameter of the rings is 60 mm or 2.4"
The outer diameter of the rings is 60 mm or 2.4"
- costa
- Posts: 38
- Joined: Fri Aug 17, 2007 5:55 pm
Re: How do I develop a huge cock head?
or if you want to stretch a bit more, hang a pound weight behind your glans and watch it grow
in the beginning phase
just to get an idea about the real dimensions
in the beginning phase
just to get an idea about the real dimensions
-
- Posts: 322
- Joined: Tue Dec 04, 2007 5:31 am
Re: How do I develop a huge cock head?
Wow that looks very interesting! Where did you buy that weight?costa wrote:or if you want to stretch a bit more, hang a pound weight behind your glans and watch it grow
in the beginning phase
just to get an idea about the real dimensions
- costa
- Posts: 38
- Joined: Fri Aug 17, 2007 5:55 pm
Re: How do I develop a huge cock head?
the weight in the post above is 420 gram (roughly a pound) and has an inside diameter from 30 mm. When I put it on with a very thin silicon sleeve to not pinch my skin while closing, it was sitting so snug that I could not pee at all. So today I returned it to the hardware store and got myself a 700 gramm 35 mm inside diameter weight. The are used in the marine section to put weight on a rope (I think). I will modify the inside with silicone layers to fit my penis, with a small front opening so it sits snug behind the head and enough space around the shaft so it can swell and lets urine through.
Here some pictures of the 700 gram cock stretcher.
70 mm long and 66 mm outer diameter
camera facing screw holes are not aligned in this photo with a 34/30 mm ring squeezed in the stretcher and a 30/26 mm ring to put around the glans first minute trial run needs some adjusting but looks and feels like to be a lot of fun
Here some pictures of the 700 gram cock stretcher.
70 mm long and 66 mm outer diameter
camera facing screw holes are not aligned in this photo with a 34/30 mm ring squeezed in the stretcher and a 30/26 mm ring to put around the glans first minute trial run needs some adjusting but looks and feels like to be a lot of fun
- costa
- Posts: 38
- Joined: Fri Aug 17, 2007 5:55 pm
Re: How do I develop a huge cock head?
answer for pump75
all my shit I get at the little china store in my computer - called aliexpress.com
and this goes also the the sleeve I used in the photo with the 30 mm 410 gram weight.
It is the sleeve pair with the one +
ratings of usability and efficiency
all my shit I get at the little china store in my computer - called aliexpress.com
and this goes also the the sleeve I used in the photo with the 30 mm 410 gram weight.
It is the sleeve pair with the one +
ratings of usability and efficiency