back in the tube.

[damien]

Goomba, I pump 2 - 3 times per week. I start by using a heat pad to loosen everything up the. I then use a good amount of Shea Butter as the lube. I start at 5hg and typically stay there for 30 minutes. Once I feel a good swell starting I go up to 10hg to 12hg but never higher. On the first day of pumping, after about two hours time I can completely fill my sleeve. I can accomplish this by 1.5 hours on day 2. I will not go higher than 12hg as I have noticed that is my personal max before I develop blisters. After several years of pumping I have settled into a nice routine. I know some guys will spike up to 15hg or even 20hg but that is not advisable at all! The secret is to stay at lower pressures and massage your junk in between with small breaks from pumping. After two hours of pumping I can really see and feel a noticeable increase after a massage break. Going back into the tube is tight (and much more enjoyable). Pumps with sleeves will give you better results because it is an even swell. Without the sleeve your junk will swell in all kinds of weird shapes. In my opinion, the best way to avoid having a Frankencock is by using the sleeve combined with lower pressures, lots of Shea Butter, and stretching hand massages.

Hey Shad, when you say you get blisters higher than 12hg, did you ever get blisters at a lower pressure before you were able to get up to 12hg. I have been getting them if I go over 8hg.

[Shadarts]

When I first started to pump I also got blisters in low pressures. Over the years I learned that you need to start low and very slowly work your way up to higher pressures. Keep this in mind:
- start at low pressures
- the type of tube is important. Work your way up to a wider tube. Use a sleeved tube!
- it is important to use lubricant
- heat up your package and be good and loose before you pump
- take frequent breaks and massage your tool
- allow blisters to fully heal. Don't go back in the tube too soon
- longer breaks are good. Sometimes you need to give your junk a break.
Remember, this is a marathon and not a sprint. Pace yourself and be patient.

[damien]

When I first started to pump I also got blisters in low pressures. Over the years I learned that you need to start low and very slowly work your way up to higher pressures. Keep this in mind:
- start at low pressures
- the type of tube is important. Work your way up to a wider tube. Use a sleeved tube!
- it is important to use lubricant
- heat up your package and be good and loose before you pump
- take frequent breaks and massage your tool
- allow blisters to fully heal. Don't go back in the tube too soon
- longer breaks are good. Sometimes you need to give your junk a break.
Remember, this is a marathon and not a sprint. Pace yourself and be patient.

Thanks for your advice/journey. I am okay at 5hg, and will follow your lead, and go gradually. Happy pumping mate.

[Shadarts]

I had a nice two hour pump today. My cock got nice and fat. What do you guys think?

[hammer773]

Wow! Outstanding job! Thanks for posting.

[jmlepoil]

Awesome! That looks mighty good..

[cuntreemann]

does your GF pump to ?

[Shadarts]

She does not....but she likes my fatty.

[Shadarts]

[Jacobsladder1]

Nice bag bro!

[AvgWhiteGuy]

Alright guys, what "sleeve" do you pump with? Source? Link? Description?