Fowfer Head
Moderator: bigray57
- fowfer
- Posts: 111
- Joined: Tue Jan 06, 2004 7:15 pm
- Location: x0||||||
Fowfer Head
A couple of pics of my head tube constructed from a pimento jar, a 2" PVC coupling and 2" PVC pipe. As with the balls, I am not trying to increase 6.25" penis girth - just head girth and don't mind if I add to my 8.75" length. <br><br>First pic is of tube - next "in the tube" - then will add out of tube later.
- Attachments
-
- 081304d.JPG
- 081304d.JPG (545.22 KiB) Viewed 3531 times
fow
- fowfer
- Posts: 111
- Joined: Tue Jan 06, 2004 7:15 pm
- Location: x0||||||
Re: Fowfer Head
This is "in the tube". As you can see, I'm about a .25" short. I purposely made the tube slight longer than current length to give me room to grow.
- Attachments
-
- 081604a.jpg
- 081604a.jpg (53.26 KiB) Viewed 3571 times
fow
- fowfer
- Posts: 111
- Joined: Tue Jan 06, 2004 7:15 pm
- Location: x0||||||
Re: Fowfer Head
1111111111
Last edited by fowfer on Thu Mar 23, 2006 8:53 pm, edited 1 time in total.
fow
- Mike
- Posts: 1064
- Joined: Wed Apr 09, 2003 10:45 pm
- Location: Canada
Re: Fowfer Head
Nice pics but 2 things,<br><br>1. you should get a completely see through tube as it's dangerous not seeing what's going on with your shaft. You can't see if you start darkening in color which means you have too much pressure & need a break & warm water soak.<br><br>2. You should try to size down your pics as they are pretty big.<br><br>Good luck.
I\'ve been pumping for almost 10yrs & never looked back.
It was b/c of one of my first girlfriend I began pumping who said when we broke up I was small at 5.7 fully hard
Now I\'m 7.2 X 6 unpumped
It was b/c of one of my first girlfriend I began pumping who said when we broke up I was small at 5.7 fully hard
Now I\'m 7.2 X 6 unpumped
- fowfer
- Posts: 111
- Joined: Tue Jan 06, 2004 7:15 pm
- Location: x0||||||
Re: Fowfer Head
Right Mike. Am aware of skin discoloration but try to pump at a lower HG to avoid. I am using a 2" tube which is the same as my normal girth with only the head portion larger. I have sufficient length and girth so the head is the only place where I want the pressure. Would have built out of clear tube but only had one peice which I'm using as another tube. <br><br>I agree on the pic size. I usually resize to 800 x 600 but that one must have slipped thru the cracks and I didn't catch it until I had already posted.<br><br>Here's a diffierent angle pump "out of the Tube".
fow