What is a good heavy duty hand pump?

Talk about ball pumping, stretching, ball enlargement techniques.

Moderator: bigray57

Post Reply
bige13
Posts: 152
Joined: Sat Jan 23, 2016 9:21 am

What is a good heavy duty hand pump?

Post by bige13 » Thu Jun 15, 2017 5:19 am

What is a good manual hand pump since my replacement pump that I brought the handle that you use to pump cracked into pieces :mrgreen :(

stjpumpfan
Posts: 100
Joined: Mon Dec 17, 2012 12:39 am

Re: What is a good heavy duty hand pump?

Post by stjpumpfan » Thu Jun 15, 2017 7:43 am

harbour frieght brake vacuum kit. 29.99 less on sale

just4me
Posts: 226
Joined: Fri May 06, 2016 7:07 am

Re: What is a good heavy duty hand pump?

Post by just4me » Fri Jun 16, 2017 5:42 am

Have you tried just using your mouth?

I had a pump from Harbour Freight but it was a dry pump only.
Didnt like it.
the gauge was handy as a point of reference but i dont know how accurate it was.

bige13
Posts: 152
Joined: Sat Jan 23, 2016 9:21 am

Re: What is a good heavy duty hand pump?

Post by bige13 » Sat Jun 17, 2017 9:24 pm

What is a good technique on trying to pump you balls and cock with you mouth, I can't even get the technique down and how do you keep the air from coming out?

bige13
Posts: 152
Joined: Sat Jan 23, 2016 9:21 am

Re: What is a good heavy duty hand pump?

Post by bige13 » Mon Jun 19, 2017 8:24 pm

BUMP!!!

just4me
Posts: 226
Joined: Fri May 06, 2016 7:07 am

Re: What is a good heavy duty hand pump?

Post by just4me » Mon Jun 19, 2017 9:28 pm

--keeping the air from coming out.
Make sure the tube fits. I found if its too big its harder to seal. This happens to me when I take too much time off.
Shave. bare skin seals better.
Use a good lubricant. Pipefitter suggested hair conditioner and it has worked great for me.

How are you connecting the tube to the jar? is it a STJ?
Some guys just slide the tube in along with everything else. I havent had success doing this.
I took a STJ and stuck the tube in the valve hole and sealed it with Gorilla Glue.

The pressure does not stay at the level where I start but every 5 min I readjust the pressure.
Also it falls and give a natural break and a rise and fall in pressure.

bige13
Posts: 152
Joined: Sat Jan 23, 2016 9:21 am

Re: What is a good heavy duty hand pump?

Post by bige13 » Mon Jun 19, 2017 10:14 pm

I have a monster tube, and a bull master magnum tube.

The tube that I have connects like another tube with the male adapter ends
Attachments
IMG_2465.JPG

bige13
Posts: 152
Joined: Sat Jan 23, 2016 9:21 am

Re: What is a good heavy duty hand pump?

Post by bige13 » Thu Jun 22, 2017 12:08 am

BUMP BUMP!!!!!!

User avatar
pipefitterdom
Posts: 1255
Joined: Fri Dec 10, 2010 11:11 pm

Re: What is a good heavy duty hand pump?

Post by pipefitterdom » Thu Jun 22, 2017 1:23 am

bige13 wrote:
Thu Jun 22, 2017 12:08 am
BUMP BUMP!!!!!!


1) Suck on the other end of that adapter using lung/diaphragm power.
2) to keep the air from returning back into the tube place the tip of your tongue over the opening.
3) release the connector
4) Mouth suction makes a higher vacuum than lung power.
5) enjoy!

5Lsal
Posts: 52
Joined: Mon Dec 21, 2015 11:19 am

Re: What is a good heavy duty hand pump?

Post by 5Lsal » Wed Jun 28, 2017 3:37 am

Mityvac makes great pumps, they're a bit expensive but are accurate and tough.

Plastic version is cheaper:
https://www.amazon.ca/Mityvac-MV8255-Se ... 19&sr=1-13

but more fragile, I dropped mine once too often and broke the handle.

I replaced it with their metal one and it's great if a bit noisy:
https://www.amazon.ca/Mityvac-MITMV8500 ... 019&sr=1-4

It does vacuum and pressure and will dent the floor rather than breaking :)

Cheers!

User avatar
pipefitterdom
Posts: 1255
Joined: Fri Dec 10, 2010 11:11 pm

Re: What is a good heavy duty hand pump?

Post by pipefitterdom » Wed Jun 28, 2017 3:47 am

The Harbor freight hand pump is around $20 made of brass and uses the same accurate gauge. Just sayin'.

Actually the mityvac does have a pretty cool steampunk look to it....

Post Reply

Who is online

Users browsing this forum: baker08, Bing [Bot], Marco360 and 12 guests