DIY Seal / Large tubes

Talk about ball pumping, stretching, ball enlargement techniques.

Moderator: bigray57

DIY Seal / Large tubes

Postby brooklynphil00 » Sat Mar 18, 2017 6:07 am

check it,

those of you dealing with the struggle of wanting to get bigger, but the rim of the tubes stops ya. sucks, I would barely make it past the 3hr mark.

But! so I went to home depot and found this green seal in the plumbing section. been trying to find something that would work/fit on my 5x7x10 LA Pump tube.

well, it worked! - I cut the flap out with scissors, then with a razor blade, I cut inside the circle, down the middle and opened it up a bit enough to fit the rim of the tube.

pumped for hour,but I gotta work tonight so I couldnt keep going. lets see how long I can go later when I get home ;)
Attachments
Screen Shot 2017-03-17 at 5.56.32 PM.png
pumping with my electric pump!
IMG_2309.JPG
tube with seal
IMG_2308.JPG
close up of the cut I did to fit the rim
IMG_2307.JPG
packaging of the seal
brooklynphil00
 
Posts: 8
Joined: Fri Feb 26, 2016 5:00 am
Location: New York, NY

Re: DIY Seal / Large tubes

Postby cyborg » Sat Mar 18, 2017 7:51 pm

Sani Seal looks like you can pick it up for $12 at a home improvement store. I'm going to pick one up and see if I like it. Thanks for the find! Ive been looking for a seal with a larger opening than the stj seal from pumptoys.
cyborg
 
Posts: 11
Joined: Fri Jun 17, 2005 8:09 am

Re: DIY Seal / Large tubes

Postby pumpman12 » Sat Mar 18, 2017 9:25 pm

How stretchy is it ??? Will you be able to take it off after your pumped really HUGE ??
User avatar
pumpman12
 
Posts: 877
Joined: Sun Mar 25, 2012 3:40 am

Re: DIY Seal / Large tubes

Postby jr1975atv » Sun Mar 19, 2017 6:49 am

He'd have a hard time getting out of that tube anyway. I know I have to blow out of a glass suntea jar
jr1975atv
 
Posts: 172
Joined: Sun Feb 22, 2015 6:16 am

Re: DIY Seal / Large tubes

Postby brooklynphil00 » Sun Mar 19, 2017 7:19 am

pumpman12 wrote:How stretchy is it ??? Will you be able to take it off after your pumped really HUGE ??


its foamy! - so yeah, can easily get out :)
brooklynphil00
 
Posts: 8
Joined: Fri Feb 26, 2016 5:00 am
Location: New York, NY

Re: DIY Seal / Large tubes

Postby pumpman12 » Mon Mar 20, 2017 10:30 pm

brooklynphil00 wrote:
pumpman12 wrote:How stretchy is it ??? Will you be able to take it off after your pumped really HUGE ??


its foamy! - so yeah, can easily get out :)

Thanks brookiynphil
So I went to Home Depot near me and they did not have it. Maybe I can order it on line.
User avatar
pumpman12
 
Posts: 877
Joined: Sun Mar 25, 2012 3:40 am

Re: DIY Seal / Large tubes

Postby Mops21 » Tue Mar 21, 2017 3:06 am

Hi

Can I use this Ring Seal for the Bullmaster Magnum too or have you anotherone ideal for me

With best Regards
Mops21
Mops21
 
Posts: 18
Joined: Thu Jun 23, 2016 11:12 pm

Re: DIY Seal / Large tubes

Postby brooklynphil00 » Wed Mar 22, 2017 9:10 am

Mops21 wrote:Hi

Can I use this Ring Seal for the Bullmaster Magnum too or have you anotherone ideal for me

With best Regards
Mops21


Hey there!

might be too big. :/
brooklynphil00
 
Posts: 8
Joined: Fri Feb 26, 2016 5:00 am
Location: New York, NY

Re: DIY Seal / Large tubes

Postby Mops21 » Wed Mar 22, 2017 11:24 pm

brooklynphil00 wrote:
Mops21 wrote:Hi

Can I use this Ring Seal for the Bullmaster Magnum too or have you anotherone ideal for me

With best Regards
Mops21


Hey there!

might be too big. :/


Ah okay thank you very much for your Infos

Have you an alternative for ne

With best Regards
Mops21
Mops21
 
Posts: 18
Joined: Thu Jun 23, 2016 11:12 pm

Re: DIY Seal / Large tubes

Postby luv2pump » Wed Mar 22, 2017 11:37 pm

Thanks for sharing, I'm gonna try this. I've been wanting better comfort for my 4.5"x5"x9" tube. I made it from an acryllic canister from walmrt. Cut out bottom, filed,sanded rim then glued lid on original opening. Been working great. I do have a 5" opening tube but its so wide it limits movement and harder to seal.
luv2pump
 
Posts: 63
Joined: Mon Feb 21, 2005 6:28 am
Location: x0||||||


Return to Ball Pumping

Who is online

Users browsing this forum: 729b4l, bignlow, Bing [Bot] and 2 guests