check it,
those of you dealing with the struggle of wanting to get bigger, but the rim of the tubes stops ya. sucks, I would barely make it past the 3hr mark.
But! so I went to home depot and found this green seal in the plumbing section. been trying to find something that would work/fit on my 5x7x10 LA Pump tube.
well, it worked! - I cut the flap out with scissors, then with a razor blade, I cut inside the circle, down the middle and opened it up a bit enough to fit the rim of the tube.
pumped for hour,but I gotta work tonight so I couldnt keep going. lets see how long I can go later when I get home
DIY Seal / Large tubes
Moderator: bigray57
-
- Posts: 70
- Joined: Fri Feb 26, 2016 5:00 am
- Location: New York, NY
-
- Posts: 55
- Joined: Fri Jun 17, 2005 8:09 am
Re: DIY Seal / Large tubes
Sani Seal looks like you can pick it up for $12 at a home improvement store. I'm going to pick one up and see if I like it. Thanks for the find! Ive been looking for a seal with a larger opening than the stj seal from pumptoys.
- pumpman12
- Posts: 1337
- Joined: Sun Mar 25, 2012 3:40 am
Re: DIY Seal / Large tubes
How stretchy is it ??? Will you be able to take it off after your pumped really HUGE ??
-
- Posts: 273
- Joined: Sun Feb 22, 2015 6:16 am
Re: DIY Seal / Large tubes
He'd have a hard time getting out of that tube anyway. I know I have to blow out of a glass suntea jar
-
- Posts: 70
- Joined: Fri Feb 26, 2016 5:00 am
- Location: New York, NY
Re: DIY Seal / Large tubes
its foamy! - so yeah, can easily get outpumpman12 wrote:How stretchy is it ??? Will you be able to take it off after your pumped really HUGE ??
- pumpman12
- Posts: 1337
- Joined: Sun Mar 25, 2012 3:40 am
Re: DIY Seal / Large tubes
Thanks brookiynphilbrooklynphil00 wrote:its foamy! - so yeah, can easily get outpumpman12 wrote:How stretchy is it ??? Will you be able to take it off after your pumped really HUGE ??
So I went to Home Depot near me and they did not have it. Maybe I can order it on line.
-
- Posts: 74
- Joined: Thu Jun 23, 2016 11:12 pm
Re: DIY Seal / Large tubes
Hi
Can I use this Ring Seal for the Bullmaster Magnum too or have you anotherone ideal for me
With best Regards
Mops21
Can I use this Ring Seal for the Bullmaster Magnum too or have you anotherone ideal for me
With best Regards
Mops21
-
- Posts: 70
- Joined: Fri Feb 26, 2016 5:00 am
- Location: New York, NY
Re: DIY Seal / Large tubes
Hey there!Mops21 wrote:Hi
Can I use this Ring Seal for the Bullmaster Magnum too or have you anotherone ideal for me
With best Regards
Mops21
might be too big. :/
-
- Posts: 74
- Joined: Thu Jun 23, 2016 11:12 pm
Re: DIY Seal / Large tubes
Ah okay thank you very much for your Infosbrooklynphil00 wrote:Hey there!Mops21 wrote:Hi
Can I use this Ring Seal for the Bullmaster Magnum too or have you anotherone ideal for me
With best Regards
Mops21
might be too big. :/
Have you an alternative for ne
With best Regards
Mops21
-
- Posts: 109
- Joined: Mon Feb 21, 2005 6:28 am
- Location: x0||||||
Re: DIY Seal / Large tubes
Thanks for sharing, I'm gonna try this. I've been wanting better comfort for my 4.5"x5"x9" tube. I made it from an acryllic canister from walmrt. Cut out bottom, filed,sanded rim then glued lid on original opening. Been working great. I do have a 5" opening tube but its so wide it limits movement and harder to seal.
-
- Posts: 62
- Joined: Sat Oct 21, 2006 8:47 pm
Re: DIY Seal / Large tubes
Hey thanks so much for the tip. Works terrific on all my pumptoys, Much better than their seals and a WHOLE LOT CHEAPER. Thanks Again.