I enjoy pumping my balls, but don't always want my cock pumped. My cock responds well to pumping, and I enjoy the feeling of a thick, heavy cock, but I'm also prone to getting a donut, which I don't enjoy. I DO enjoy pumping my balls and feeling a sense of fullness in both my balls and my sack.
Has anyone found a good way to pump just balls, and not include cock in the equation? I sometimes pump balls alone in a 2.5 inch cylinder, but eventually my cock gets pulled into the tube. Also am not comfortable with the stress this places on the underside of my cock.
Has anyone else attempted to resolve this issue?
Isolating Balls for Pumping
Moderator: bigray57
- bignlow
- Posts: 2862
- Joined: Wed Jan 27, 2010 7:30 pm
- Location: Rochdale nr Manchester UK
Re: Isolating Balls for Pumping
I have the same trouble. Cock always ends up in the tube, backwards or upside down sometimes. Try wearing a ring behind the cock head, it does it for me unless i'm spending a lot of time in the big tubes and hopefully will promote a bit of cock head growth.
Bignlow
Bignlow
- GTOK
- Posts: 408
- Joined: Fri Feb 03, 2012 7:36 pm
Re: Isolating Balls for Pumping
If you have a cylinder large enough, try pumping your whole package first for a short session, maybe 15 minutes, to build up base circumference. OR try pumping cock only first again, to build up base girth. This way when you do go in balls only, the increased base will (hopefully) prevent any of your cock from getting sucked in. Also, lower your pressure (if possible) to keep excess skin area from getting sucked into the tube. The longer you go, the easier it will be to keep your cock out for balls only pumping.
Follow me on Twitter @iLogPE
Current stats: 8" BPEL x 6.5 MEG ---> Goal: 9x7 and beyond
Current stats: 8" BPEL x 6.5 MEG ---> Goal: 9x7 and beyond
-
- Posts: 3
- Joined: Tue Sep 13, 2016 2:59 pm
Re: Isolating Balls for Pumping
I love having huge nuts while my cock is mostly unchanged, just feels better. I've been messing around and figured out how to mostly do that.
Get this or something like it.
http://www.forttroff.com/product/61780_ ... _PACK.html
Unroll and wrap it around the base to near the glans back down to the base and cut off the excess. use two or three jelly rubber cock rings to secure it and keep it from unraveling.
You have to experiment with how tight to wrap it, too tight and pissing in the tube is going to hurt, too loose and it will unravel anyway. Aside from swollen piss lips my cock is unpumped but my nuts are huge.
Get this or something like it.
http://www.forttroff.com/product/61780_ ... _PACK.html
Unroll and wrap it around the base to near the glans back down to the base and cut off the excess. use two or three jelly rubber cock rings to secure it and keep it from unraveling.
You have to experiment with how tight to wrap it, too tight and pissing in the tube is going to hurt, too loose and it will unravel anyway. Aside from swollen piss lips my cock is unpumped but my nuts are huge.
- SFBallpumper
- Posts: 1242
- Joined: Wed Nov 01, 2006 5:44 pm
- Location: Riverside, CA
Re: Isolating Balls for Pumping
I've used Nexcare Coban first aid tape in the same way that TurgidMeatWand does with the strip of latex. It's a stretchy, mesh-like tape. It sticks to itself and not your skin, so you don't have to worry about it taking your skin off when you remove it. You also you don't have to pin it or tape it to keep it from unraveling. With me, it's easiest to work with when my skin is dry. It's also cheap. Amazon has it here:
https://www.amazon.com/3M-Coban-Self-Ad ... 9T04T86X75
You should also be able to find it at any drugstore. There are lots of generic versions available, as well.
https://www.amazon.com/3M-Coban-Self-Ad ... 9T04T86X75
You should also be able to find it at any drugstore. There are lots of generic versions available, as well.
Last edited by SFBallpumper on Tue Sep 20, 2016 10:47 am, edited 1 time in total.
It’s the pleasure of the pressure...
- cleancut1
- Posts: 39
- Joined: Tue Mar 29, 2016 10:23 pm
Re: Isolating Balls for Pumping
"Swollen piss lips" is such a nice phrase... Thanks for the tips on wrapping. I thing for now I will try the idea of pumping up "base diameter" which I think I can do, and then trying to keep cock out of the tube.
-
- Posts: 493
- Joined: Thu Apr 03, 2014 7:44 am
Re: Isolating Balls for Pumping
One additional thing might help keep your cock out of the tube. Very carefully wipe away any lubricant from your cock...while putting plenty on your balls. Your cock won't slip into the tube quite as easily when it is dry.
- cleancut1
- Posts: 39
- Joined: Tue Mar 29, 2016 10:23 pm
Re: Isolating Balls for Pumping
Combination of a "base pump", keeping my cock relatively hard, and wiping away lube seems to have done the trick!
- GTOK
- Posts: 408
- Joined: Fri Feb 03, 2012 7:36 pm
Re: Isolating Balls for Pumping
Nice package!
What brand of ring is that you're wearing? I like the thickness of that band.
What brand of ring is that you're wearing? I like the thickness of that band.
Follow me on Twitter @iLogPE
Current stats: 8" BPEL x 6.5 MEG ---> Goal: 9x7 and beyond
Current stats: 8" BPEL x 6.5 MEG ---> Goal: 9x7 and beyond
- cleancut1
- Posts: 39
- Joined: Tue Mar 29, 2016 10:23 pm
Re: Isolating Balls for Pumping
Thanks for the comment!
Cheap "gummy" cock ring - like this one:
http://sextoyshop.us/cock-rings/909-2-g ... rings.html
Cheap "gummy" cock ring - like this one:
http://sextoyshop.us/cock-rings/909-2-g ... rings.html
-
- Posts: 2
- Joined: Sat Mar 03, 2007 6:22 am
- Contact:
Re: Isolating Balls for Pumping
Just started with a 1 3/4" L.A. Pump a few weeks ago, and decided to also try it on each ball individually, which seems to be working well, not only enlarging them but also stretching the sac.
-
- Posts: 139
- Joined: Thu Dec 07, 2006 5:59 pm
Re: Isolating Balls for Pumping
I have found that using an acrylic carafe with a pump tube cushion isolates my balls beautifully and gives a nice tear drop shape to that sack. It is easy to drill and attach the female end. when you pump just your cock it feels like the most incredible pussy/ass ever. plus you can adjust the suction to get crazy cool feelings and watch it glide deep in the hole.
-
- Posts: 894
- Joined: Fri May 06, 2016 7:07 am
Re: Isolating Balls for Pumping
I had/have the same problem. Someone on her mentioned used a condom.
I got some sport tape and tried taping where the doughnut forms.
Works great.
Wrap around several times. not too tight... but firm.
I have never cut off the circulation.
Usually i do this in the STJ and then for a while in the SR
Then take it off and go back in the senior.
This is how I got to 16"
Got a couple of others techniques that I found that worked.
I can get the doughnut in a later pump if i want.
I got some sport tape and tried taping where the doughnut forms.
Works great.
Wrap around several times. not too tight... but firm.
I have never cut off the circulation.
Usually i do this in the STJ and then for a while in the SR
Then take it off and go back in the senior.
This is how I got to 16"
Got a couple of others techniques that I found that worked.
I can get the doughnut in a later pump if i want.
-
- Posts: 161
- Joined: Mon Nov 11, 2013 2:28 am
Re: Isolating Balls for Pumping
Cling film from the kitchen also works guys to control the build up of fluid I’m told
-
- Posts: 75
- Joined: Wed Apr 25, 2018 11:01 am
Re: Isolating Balls for Pumping
posted this in the other thread with same title,
what do ya guys think of possibilities of this?
https://shop.oxballs.com/JUICY-DUO-Pump ... X-1349.htm
I found it awhile back and thought it might be handy for isolating separate pumping tubes???
but wouldn't know how soft if gets once warms up and possibly warps and doesn't hold in place and loses vacuum.
It may be problematic with two sides of tubes clashing up next to each other.
what are your opinions on it? or maybe someone around here has already tried it?
each hole is estimated at 1 1/4" diameter.
what do ya guys think of possibilities of this?
https://shop.oxballs.com/JUICY-DUO-Pump ... X-1349.htm
I found it awhile back and thought it might be handy for isolating separate pumping tubes???
but wouldn't know how soft if gets once warms up and possibly warps and doesn't hold in place and loses vacuum.
It may be problematic with two sides of tubes clashing up next to each other.
what are your opinions on it? or maybe someone around here has already tried it?
each hole is estimated at 1 1/4" diameter.