Learning balls pumping

Talk about ball pumping, stretching, ball enlargement techniques.

Moderator: bigray57

Post Reply
TuXik
Posts: 27
Joined: Sun May 31, 2015 1:08 am

Learning balls pumping

Post by TuXik » Thu Jun 18, 2015 3:48 am

Hi there,

I have bought a new two-stage cylinder and learning how to use it. Today I have tried to pump balls only. I love pumped balls but do not like some much when the rest is pumped. And this is the result. No so big but it is already a great feeling!
Attachments
2015-06-17 21.05.12.jpg
Pumped balls

User avatar
marcotoo
Posts: 913
Joined: Tue Apr 01, 2003 9:37 pm
Location: x1|Finland|Finland|europe|361|142|

Re: Learning balls pumping

Post by marcotoo » Thu Jun 18, 2015 4:00 am

take it slow and gently and you will get hot results i can guarentee that...kisses....veru hot for a starter.
Attachments
WP_000986.jpg

User avatar
TobyB
Posts: 953
Joined: Mon Nov 14, 2005 4:16 pm
Location: Alkmaar, Netherlands
Contact:

Re: Learning balls pumping

Post by TobyB » Thu Jun 18, 2015 1:13 pm

nice TuXik!! Keep on pumping, you'll be big!
smooth dutch pumper. Tumblr: tobybagain.tumblr.com
and website www.tobyb.nl

lik2pump
Posts: 506
Joined: Sun Aug 17, 2003 10:31 pm
Location: northern Michigan

Re: Learning balls pumping

Post by lik2pump » Fri Jun 19, 2015 12:45 am

if read your post correct maybe a 2stage is not the way to go instead try a larger tube for pumping your penis to try an isolate just pumping your balls or try a isolater tube that does pump both but keeps your cock from getting the bloated look have fun be safe and keep posting and pumping

User avatar
bigtitlover
Posts: 875
Joined: Mon Mar 29, 2010 2:05 am
Location: Germany

Re: Learning balls pumping

Post by bigtitlover » Fri Jun 19, 2015 10:42 pm

like your results. I pump cock and balls together in a jar. Also a great feeling

TuXik
Posts: 27
Joined: Sun May 31, 2015 1:08 am

Re: Learning balls pumping

Post by TuXik » Mon Jun 22, 2015 3:12 am

Today I have pumped complete package for 2 hours and this is the result (I thing I was huge but I cannot make a photo to show it :-( )

I hope you like it!

BTW: I have read somewhere that I should avoid erection during pumping but this seems to be quite difficult. How do you do that?
Attachments
2015-06-21 20.14.10.jpg
2015-06-21 20.14.17.jpg
2015-06-21 20.15.56.jpg
2015-06-21 20.17.59.jpg
2015-06-21 20.18.57.jpg

User avatar
pipefitterdom
Posts: 1204
Joined: Fri Dec 10, 2010 11:11 pm

Re: Learning balls pumping

Post by pipefitterdom » Mon Jun 22, 2015 9:57 pm

TuXik wrote:Today I have pumped complete package for 2 hours and this is the result (I thing I was huge but I cannot make a photo to show it :-( )

I hope you like it!

BTW: I have read somewhere that I should avoid erection during pumping but this seems to be quite difficult. How do you do that?
Nothing wrong with being hard, but that involuntary hardon means you are using a high vac level. Nothing wrong with that either as long as your skin tolerates it well.
Going by the look you have you've got going, you haven't done any damage.

TuXik
Posts: 27
Joined: Sun May 31, 2015 1:08 am

Re: Learning balls pumping

Post by TuXik » Tue Jun 23, 2015 1:54 am

pipefitterdom wrote: Nothing wrong with being hard, but that involuntary hardon means you are using a high vac level. Nothing wrong with that either as long as your skin tolerates it well.
Going by the look you have you've got going, you haven't done any damage.
What is a high vac level? I use something like 100mm Hg - is it too much? I do not feel any discomfort with this level.

Boulevard
Posts: 3
Joined: Wed Jun 17, 2015 2:29 am

Re: Learning balls pumping

Post by Boulevard » Tue Jun 23, 2015 3:02 am

Very nice. I too am in the learning stage, and hope to big as big as you eventually!

User avatar
pipefitterdom
Posts: 1204
Joined: Fri Dec 10, 2010 11:11 pm

Re: Learning balls pumping

Post by pipefitterdom » Tue Jun 23, 2015 12:54 pm

TuXik wrote:
pipefitterdom wrote: Nothing wrong with being hard, but that involuntary hardon means you are using a high vac level. Nothing wrong with that either as long as your skin tolerates it well.
Going by the look you have you've got going, you haven't done any damage.
What is a high vac level? I use something like 100mm Hg - is it too much? I do not feel any discomfort with this level.
I sort of panicked when I saw 100! Then I noticed mm which converts to about 4in HG, which is a relatively safe level. Some guys can tolerate more, but I have had skin damage and permanent discoloration at higher levels, so for me slow and steady wins the race. Not that this is a competition, just a figure of speech.

Read up on tanukis' pressure peaks. It a very effective technique repeatedly using short bursts of higher levels. I do spikes from 5-7hg, some are more extreme.

TuXik
Posts: 27
Joined: Sun May 31, 2015 1:08 am

Re: Learning balls pumping

Post by TuXik » Thu Jul 02, 2015 4:03 am

I have pumped whole package today and this is a comparison before and after 1.5 hrs of pumping :-)
Attachments
2015-07-01 18.47.51.jpg
Before and after 1.5 hrs of pumping
2015-07-01 18.47.37.jpg
Before and after 1.5 hrs of pumping
2015-07-01 18.47.32.jpg
Before and after 1.5 hrs of pumping

User avatar
TobyB
Posts: 953
Joined: Mon Nov 14, 2005 4:16 pm
Location: Alkmaar, Netherlands
Contact:

Re: Learning balls pumping

Post by TobyB » Fri Jul 03, 2015 3:56 am

mmmm, love these photos!
smooth dutch pumper. Tumblr: tobybagain.tumblr.com
and website www.tobyb.nl

TuXik
Posts: 27
Joined: Sun May 31, 2015 1:08 am

Re: Learning balls pumping

Post by TuXik » Sat Jul 11, 2015 5:34 am

I have pumped for 3 hours today - this was my longest session so far, but not so big difference from in size :-/
The biggest problem I always have is how to get pumped package out of the pump.
Attachments
2015-07-10 22.38.22.jpg
2015-07-10 22.37.53.jpg

fuelhead
Posts: 139
Joined: Sun Mar 16, 2008 9:41 pm
Location: Buffalo NY

Re: Learning balls pumping

Post by fuelhead » Sat Jul 11, 2015 8:10 pm

Love it! Keep up the great work!

bigricky
Posts: 196
Joined: Wed Jan 12, 2011 12:39 am
Location: Toronto Ontario

Re: Learning balls pumping

Post by bigricky » Sat Jul 11, 2015 8:29 pm

Invest in the Monster-tube Junior….. you will see the results you are looking for in a very short time.

Post Reply

Who is online

Users browsing this forum: norsknuts, roperon68 and 3 guests