pumping bignlow
Moderator: bigray57
- FamilyGuy
- Posts: 859
- Joined: Wed Oct 11, 2006 9:58 pm
- Location: Virginia
- Contact:
Re: pumping bignlow
I can see you giving the MTj a serious run for the money, big nuts and droopy relaxed sack!
- bigtitlover
- Posts: 1928
- Joined: Mon Mar 29, 2010 2:05 am
- Location: Germany
Re: pumping bignlow
I always love your big balls viewing from behind
-
- Posts: 413
- Joined: Sun Sep 17, 2017 8:38 pm
- Location: Uk
Re: pumping bignlow
I would certainly love for you to empty them in me xxx
- bignlow
- Posts: 2862
- Joined: Wed Jan 27, 2010 7:30 pm
- Location: Rochdale nr Manchester UK
Re: pumping bignlow
To be honest, i'm well out of practice but i'm sure you could sort that out.......
-
- Posts: 1225
- Joined: Tue Oct 19, 2010 6:15 am
- Location: Canada
Re: pumping bignlow
B and L, that rear shot is plenty spectacular About the MTjr. ? I thought u had once tried it and found it not conducive to your body type? I myself have had one now for several months which fits nicely but hurts like hell and is difficult to obtain a good seal (vacuum wise), for those reasons I will have to get a seal from Pumptoys and now still go back to my LJ which I love. I wish the MTjr. was built with a strait lip rather than the re-curve style and come with a silicone seal for comfort Any way I have always thought that the MTjr. was brilliant for shaping and hugeness and really look forward to u filling it it will be epic and truly 'monstrous' on you and me if can ever get it to work properly See u in the 'monster' club, BB.
- bignlow
- Posts: 2862
- Joined: Wed Jan 27, 2010 7:30 pm
- Location: Rochdale nr Manchester UK
Re: pumping bignlow
Bullbags, First time i tried one i wasn't too happy with it. didn't feel as comfortable as my tubes with the cushion ring on. 2nd go a while later and didn't seem so bad. When someone offered to sponsor me to one i couldn't turn it down. Think i might have to get a bit of size in my tubes first to get the best out of it. Got a tip about new monsters. The gasket can struggle to seal. Apparently a bit of vaseline smeared onto it helps to seal it until it beds in.
Just a few pics.
last Friday in the yard at work wearing my normal sunshine work attire.
And a few from late last night. Not much pump time last Friday and nothing over the weekend. Sunday wasa naked day in the back garden grafting.
Busy today and i've a big engine to get out. the sun is out so need to get on. Need to see some tube time as well, i've a monster to get into...
Bignlow
Just a few pics.
last Friday in the yard at work wearing my normal sunshine work attire.
And a few from late last night. Not much pump time last Friday and nothing over the weekend. Sunday wasa naked day in the back garden grafting.
Busy today and i've a big engine to get out. the sun is out so need to get on. Need to see some tube time as well, i've a monster to get into...
Bignlow
- bignlow
- Posts: 2862
- Joined: Wed Jan 27, 2010 7:30 pm
- Location: Rochdale nr Manchester UK
Re: pumping bignlow
Decided to spend dinner time in the sun in the yard at work in a tube.
Luckily, i had a parcel this morning with a part i've been waiting for. Just the right size to prop up the tube while reclining.
had to retire to the office, just too warm today in the sun. Sweating like buggery which is no god for pumping, Too much fluids leaking out...
Bignlow
Luckily, i had a parcel this morning with a part i've been waiting for. Just the right size to prop up the tube while reclining.
had to retire to the office, just too warm today in the sun. Sweating like buggery which is no god for pumping, Too much fluids leaking out...
Bignlow
- bignlow
- Posts: 2862
- Joined: Wed Jan 27, 2010 7:30 pm
- Location: Rochdale nr Manchester UK
Re: pumping bignlow
End of the session.....
And around 30 mins later in the workshop.....
Engines out !!
nice start to the week. Mighttry another before i finish but times getting short.
bignlow
And around 30 mins later in the workshop.....
Engines out !!
nice start to the week. Mighttry another before i finish but times getting short.
bignlow
- bignlow
- Posts: 2862
- Joined: Wed Jan 27, 2010 7:30 pm
- Location: Rochdale nr Manchester UK
Re: pumping bignlow
Well, i couldn't resist and had a quick half hour at the end of the afternoon.
Got a hell of a long way to go to fill that. Looking at the pull in i need to get some size in my tubes first i think to get the best out of the monster.
A quick comparison.
This is one of my big tubes compared with a monster junior.
To look at there's not a lot of difference but trust me, the junior is a LOT bigger. If i'm to pump wet i'd have to use twice the amount of oil to leave a similar air gap to vac out. The only problem with wet pumping i can see with the junior is recovering the oil when opening the tube without it all landing up on the floor. I'll think of something. I could fit a drain pipe to the connector and vent the tube but that would take ages. Think i need a catch tank of some description. Might be awkward visiting massage lady though....
Bignlow
Got a hell of a long way to go to fill that. Looking at the pull in i need to get some size in my tubes first i think to get the best out of the monster.
A quick comparison.
This is one of my big tubes compared with a monster junior.
To look at there's not a lot of difference but trust me, the junior is a LOT bigger. If i'm to pump wet i'd have to use twice the amount of oil to leave a similar air gap to vac out. The only problem with wet pumping i can see with the junior is recovering the oil when opening the tube without it all landing up on the floor. I'll think of something. I could fit a drain pipe to the connector and vent the tube but that would take ages. Think i need a catch tank of some description. Might be awkward visiting massage lady though....
Bignlow
- bignlow
- Posts: 2862
- Joined: Wed Jan 27, 2010 7:30 pm
- Location: Rochdale nr Manchester UK
Re: pumping bignlow
Started earlyish this morning in the 9. Bit of a push to get in but 40 mins later.....
Rest time and an hour in my 10 before going and finding some dinner and getting more oil.
back in the 10 now for another hour, rest and then if i've time i might see how much oil i need in a junior to pump just how i want. That'll be later then no doubt...
Bignlow
Rest time and an hour in my 10 before going and finding some dinner and getting more oil.
back in the 10 now for another hour, rest and then if i've time i might see how much oil i need in a junior to pump just how i want. That'll be later then no doubt...
Bignlow
- FamilyGuy
- Posts: 859
- Joined: Wed Oct 11, 2006 9:58 pm
- Location: Virginia
- Contact:
Re: pumping bignlow
You could try drilling and treading a second connector like pumpman did, still might be a little messy but you would recover most of the oil.
- bignlow
- Posts: 2862
- Joined: Wed Jan 27, 2010 7:30 pm
- Location: Rochdale nr Manchester UK
Re: pumping bignlow
I'll have to look that one up familyguy.
Finally managed an hour in the monster with oil. Bit easier than i thought it would be filling up. Emptying could have been very messy but in the end not too bad. There is a lot of clean up though.
Bulge a little bigger though..
you probably need to be there to get the full benefit of that one......
Overall, i'm quite happy with that first session in the junior.
Got out when i'd had enough. Quite a bit of pumping today. Hopefully i'll keep a lot of this size through till tomorrow so it only needs a good session in my 10 before the junior.
Much work to be done before i find more size in the junior me thinks. Much moisturising, plenty of fluids on board and time in the tube. Bit harder to hide though at work, bigger tube.
bignlow
Finally managed an hour in the monster with oil. Bit easier than i thought it would be filling up. Emptying could have been very messy but in the end not too bad. There is a lot of clean up though.
Bulge a little bigger though..
you probably need to be there to get the full benefit of that one......
Overall, i'm quite happy with that first session in the junior.
Got out when i'd had enough. Quite a bit of pumping today. Hopefully i'll keep a lot of this size through till tomorrow so it only needs a good session in my 10 before the junior.
Much work to be done before i find more size in the junior me thinks. Much moisturising, plenty of fluids on board and time in the tube. Bit harder to hide though at work, bigger tube.
bignlow
- baker08
- Posts: 92
- Joined: Sun Jul 15, 2012 8:04 am
Re: pumping bignlow
Thanks for the update and pic posts of the new MTjnr.You're right in saying there is a lot of the chamber to fill.Once you get a method down pat wth starting in your progressive jars then switching up.I'm sure you can reach your new targets.Imagine the 'pull' down once you get cock isolation.Really looking forward to the next stage of your journey BnL.
Once again thank you for sharing your passion to all of your avid followers.
Once again thank you for sharing your passion to all of your avid followers.
- bignlow
- Posts: 2862
- Joined: Wed Jan 27, 2010 7:30 pm
- Location: Rochdale nr Manchester UK
Re: pumping bignlow
Thanks Littlemiss.
Wednesday and a good hour or so at dinner time in my 10 followed by a good hour, i was working so could well have been hour and a half in the junior.
Fatter rather than longer in the junior which is only to be expected at this stage, Another reason for a session in one of my tubes first.
late afternoon yesterday.
The package feels denser after the junior and pulls back far more than it does after being in my tubes and takes a lot longer to settle. It'll probably take a while for everything to get used to the tube.
a late soak in the bath revived and settled them though....
back in the 10 shortly. Need a good bulge for the lass in the chippy at dinner time.
Bignlow
Wednesday and a good hour or so at dinner time in my 10 followed by a good hour, i was working so could well have been hour and a half in the junior.
Fatter rather than longer in the junior which is only to be expected at this stage, Another reason for a session in one of my tubes first.
late afternoon yesterday.
The package feels denser after the junior and pulls back far more than it does after being in my tubes and takes a lot longer to settle. It'll probably take a while for everything to get used to the tube.
a late soak in the bath revived and settled them though....
back in the 10 shortly. Need a good bulge for the lass in the chippy at dinner time.
Bignlow