Pumping wet

pumpin60 · Post by **pumpin60** » Mon Aug 16, 2004 7:55 pm

One thing I've really found helpful over the years is to pump with really warm water. This helps the expansion and as the water cools off, it gives you appropriate intervals to take the tube off, massage everything and then renew the warm water. My biggest results have been achieved with the warm water technique. It does help to have a big towel and not getting water sucked up into the vacuum pump tube.

pumpin60 · Post by **pumpin60** » Mon Aug 16, 2004 7:58 pm

Another shot of a wet pump in my monster jr tube

pumpin60 · Post by **pumpin60** » Mon Aug 16, 2004 8:01 pm

Results of a wet pump (sorry about the pic quality, over exposed in more ways than one)

pumpin60 · Post by **pumpin60** » Mon Aug 16, 2004 8:03 pm

Another shot of wet pumpin in a simple homemade tube

pumpin60 · Post by **pumpin60** » Mon Aug 16, 2004 8:04 pm

more results

pumpin60 · Post by **pumpin60** » Mon Aug 16, 2004 8:06 pm

Last one (gotta head to work) Sometimes if you pump too big in a 2 stage, you end up with a tight squeeze so don;t be in a hurry to get out.

nakedandhairy · Post by **nakedandhairy** » Tue Aug 17, 2004 12:12 am

Very nice pics! I agree..I always pump wet as results are better that way! ::) ::)

tomk · Post by **tomk** » Tue Aug 17, 2004 5:08 am

Awesome pics pumpin60. I wet pump for about 20 mins. before I go into the MT Jr. and you do get better results. ;D

pumpin60 · Post by **pumpin60** » Tue Aug 17, 2004 7:19 am

Thanks guys. Here's a shot from my most recent session with my 2 stage tube

pumpin60 · Post by **pumpin60** » Tue Aug 17, 2004 7:21 am

and another

DELETED · Post by **DELETED** » Tue Aug 17, 2004 9:42 am

DELETED

DELETED · Post by **DELETED** » Tue Aug 17, 2004 9:46 am

DELETED

pumpin60 · Post by **pumpin60** » Wed Aug 18, 2004 5:54 pm

Thanks pumpster, I enjoy your postings & pics. Here's one more pic, unfortunately it is a little blurry as I tried to take the pic one handed ::)

alilnut · Post by **alilnut** » Wed Aug 18, 2004 7:10 pm

Hey fellow wet pumpers. I also like wet pumping, but (eventhough I think I know the answer), how do you relax while pumping, yet keep water from getting sucked into the pump. That is how I destroyed my pressure guage. Some water accidentally got sucked into my electric pump. When I am pumping, my hands and mind are free to work or whatever. Since the tube hangs down, the vaccuum sucks the water right into the pump. Any thoughts? Thanks, -A

PrimeThePump · Post by **PrimeThePump** » Thu Aug 19, 2004 12:54 am

alilnut, A flask and two-hole rubber stopper should cure your problem. The volume of the flask should be slightly larger than the amount of water that you are using. Connect the pump to one hole of the stopper and your cylinder to the other. That way any water that is drawn from the cylinder will go into the flask and not the pump. The MityMite (or whatever the name is) that I bought at AutoZone came with a container just for the purpose of preventing liquids for getting into the pump Regards, PTP

forums.newart.com

Pumping wet

Pumping wet

Re: Pumping wet

Re: Pumping wet

Re: Pumping wet

Re: Pumping wet

Re: Pumping wet

Re: Pumping wet

Re: Pumping wet

Re: Pumping wet

Re: Pumping wet

Re: Pumping wet

Re: Pumping wet

Re: Pumping wet

Re: Pumping wet

Re: Pumping wet