pumping bignlow

Talk about ball pumping, stretching, ball enlargement techniques.

Moderator: bigray57

Post Reply
User avatar
bignlow
Posts: 1304
Joined: Wed Jan 27, 2010 7:30 pm
Location: Rochdale nr Manchester UK

Re: pumping bignlow

Post by bignlow » Fri Jun 22, 2018 4:41 am

2nd session early afternoon...


21 jun 18 010.jpg
21 jun 18 013.jpg
21 jun 18 014.jpg
21 jun 18 015.jpg
21 jun 18 016.jpg
21 jun 18 018.jpg
21 jun 18 019.jpg
21 jun 18 020.jpg
21 jun 18 021.jpg


The cock is taking a bit of a beating in this bigger tube. better later in the week when the balls are filling up more but getting sore under the glans, hence the wider glans ring i cobbled up. I'll need some bigger rings for the big tubes as the cock seems to be fattening up nicely. I've got 25mm so probably need 28 or 30 and maybe 2 welded together so the skin doesn't leech between them. In the meantime i'll have to use what i can find.

bignlow

Pump
Posts: 278
Joined: Sat Mar 29, 2003 9:02 pm
Location: LI NY

Re: pumping bignlow

Post by Pump » Fri Jun 22, 2018 10:01 am

Amazing results great hang and shape

User avatar
baker08
Posts: 80
Joined: Sun Jul 15, 2012 8:04 am

Re: pumping bignlow

Post by baker08 » Fri Jun 22, 2018 3:34 pm

cock might be taking a beating but damn it looks so plump.the step up in the diameter tubes is really filling out everything real well,progressive size step ups are the way to go for maximum ball length,maybe see you in the Jr before the weeks end.thanks for posting your newest updates.

User avatar
bignlow
Posts: 1304
Joined: Wed Jan 27, 2010 7:30 pm
Location: Rochdale nr Manchester UK

Re: pumping bignlow

Post by bignlow » Fri Jun 22, 2018 4:56 pm

THanks Pump.

Baker,The bigger tubes are hard to pack and stretch in but to get any bigger i think i'll have to spend more time in them.
Start narrow after a rest but once i've worked my way up the tubes i need to stick to the bigger ones for longer. There was a time i'd have to pump away for quite a while before using the 12 but i've been in it most of this week, mainly because my 10 is now leaking so bad it's hard to get a decent pump out of it while i'm working but i've found out this week i can get away with the bigger tube better than i thought. Either i've been missing a trick or i'm a little bigger than i was.
That said, it's replacement is nearly finished.
The 12 is a 80 into 100, 3 1/8 into 4"
The 10 is a 74 into 90, 2 7/8 into 3 1/2"
The new tube is a bit of a hybrid. Made from what i had lying about in the cupboard, i didn't have enough 90 for length so sleeved it over with some 100, 4", so this will now be a 74 into 100, 2 7/8 into 4". It goes out to 4" well down the tube so the first part of it will be as the old tube 10 but once i pull down the tube the balls will have some extra room to expand at the bottom, hopefully creating more teardrop shape which, again, hopefully will help once in the junior.

This is my old patched up 10 with it's replacement.


tubes 004.jpg


It's come out a bit longer which is no bad thing. More oil that wil stay warmer longer and a bigger air gap to vac out. Might be a job hiding it while i'm working though !


And this is the new tube all but done. Finished it off this morning. It now has the weekend to set and it should be fit for Monday morning.




tubes 001.jpg

Friday and a session in the 12 later this morning and then the junior this afternoon is the plan.

bignlow

User avatar
baker08
Posts: 80
Joined: Sun Jul 15, 2012 8:04 am

Re: pumping bignlow

Post by baker08 » Fri Jun 22, 2018 5:12 pm

You have been busy with the replacement,it has good displacement and i can see something else in the background because of the placement. :P

Metal_Micky
Posts: 290
Joined: Sat Feb 19, 2005 3:30 pm

Re: pumping bignlow

Post by Metal_Micky » Fri Jun 22, 2018 7:25 pm

You've probably mentioned it before but save me looking... what/where do you get the nice comfy coloured seals from???

User avatar
bignlow
Posts: 1304
Joined: Wed Jan 27, 2010 7:30 pm
Location: Rochdale nr Manchester UK

Re: pumping bignlow

Post by bignlow » Fri Jun 22, 2018 8:10 pm

Very good Baker. like that.....

MM, Pet shop. They're the rubber rings for dogs. It's mentioned i'm sure somewhere in the last 2 or 3 pages unless i PM'd someone on how to do it. PM me if you can't find it.

First session today around hour and twenty mins.


22 jun 18 001.jpg
22 jun 18 002.jpg
22 jun 18 003.jpg
22 jun 18 004.jpg

Today's chip shop bulge....


22 jun 18 005.jpg

Bignlow
Last edited by bignlow on Tue Jun 26, 2018 11:33 pm, edited 2 times in total.

REBinNYC
Posts: 84
Joined: Sun Jun 16, 2002 11:33 pm
Location: Johnson City, TN

Re: pumping bignlow

Post by REBinNYC » Fri Jun 22, 2018 8:54 pm

What a journey you're on! Inspiring so many of us and informative as well....really appreciate you being so diligent about sharing your efforts.

User avatar
bignlow
Posts: 1304
Joined: Wed Jan 27, 2010 7:30 pm
Location: Rochdale nr Manchester UK

Re: pumping bignlow

Post by bignlow » Fri Jun 22, 2018 11:09 pm

Thanks Reb, glad you like it.

Dinner done with and back in the 12 for 30-35 mins. A bit of a break to re-warm the oil and have a ciggie in the yard.


22 jun 18 006.jpg
22 jun 18 007.jpg
22 jun 18 008.jpg
22 jun 18 009.jpg

22 jun 18 011.jpg
22 jun 18 012.jpg

and now in the junior....


22 jun 18 013.jpg
See what happens by close of play...

bignlow

User avatar
bignlow
Posts: 1304
Joined: Wed Jan 27, 2010 7:30 pm
Location: Rochdale nr Manchester UK

Re: pumping bignlow

Post by bignlow » Sat Jun 23, 2018 10:01 pm

Around an hour in the junior late afternoon.


22 jun 18 015.jpg
22 jun 18 016.jpg


Going to take some filling that bugger.....


22 jun 18 017.jpg
22 jun 18 019.jpg
22 jun 18 021.jpg
22 jun 18 022.jpg
22 jun 18 020.jpg


And the quick tea time pint down the pub before tea bulge


22 jun 18 023.jpg


The boys have had some stick this week and a bit of an ache around the hernia site so the weekend off now till dinner on Monday.

Bignlow

User avatar
FamilyGuy
Posts: 266
Joined: Wed Oct 11, 2006 9:58 pm
Location: Virginia

Re: pumping bignlow

Post by FamilyGuy » Sun Jun 24, 2018 11:47 am

Great shots Bl, the hang and fullness!

User avatar
Pumping Now
Posts: 111
Joined: Thu Jul 21, 2016 5:25 am

Re: pumping bignlow

Post by Pumping Now » Sun Jun 24, 2018 1:46 pm

I had a MT jr for a while. It was too uncomfortable. A curved opening would be nice, instead of that flat surface & square corner against the pubes.
Your balls in the sunny outside pic are enviable!

User avatar
bignlow
Posts: 1304
Joined: Wed Jan 27, 2010 7:30 pm
Location: Rochdale nr Manchester UK

Re: pumping bignlow

Post by bignlow » Wed Jun 27, 2018 4:03 am

Family Guy and Pumping Now, thanks for the comments.

Everything has had a rest this weekend, Been a bit full on this last couple of weeks.
This was Saturday night.

23 jun 18.jpg

Extended the weekend into Monday so today has been the first day back and in my new tube. I'll put those up in the morning, bit busy at work and busy tonight, the race car here is out on Sunday and still not ready.

Bignlow

User avatar
bignlow
Posts: 1304
Joined: Wed Jan 27, 2010 7:30 pm
Location: Rochdale nr Manchester UK

Re: pumping bignlow

Post by bignlow » Wed Jun 27, 2018 4:09 pm

Back to it Tuesday, busy busy at work so just an hour over dinner in the new version of my tube 10, a sort of 10 1/2.

One hour and just short of getting into the bigger main chamber at the bottom.


26 jun 18 002.jpg
26 jun 18 003.jpg
26 jun 18 004.jpg
26 jun 18 006.jpg
26 jun 18 007.jpg
26 jun 18 009.jpg


And end of a busy night with the race car....


26 jun 18 010.jpg
26 jun 18 011.jpg
26 jun 18 012.jpg
26 jun 18 014.jpg


Probably about the same today. Nice and sunny and warm so naked all day again but busy.

Bignlow

User avatar
bignlow
Posts: 1304
Joined: Wed Jan 27, 2010 7:30 pm
Location: Rochdale nr Manchester UK

Re: pumping bignlow

Post by bignlow » Thu Jun 28, 2018 4:13 pm

Wednesday went to hour and a half, part in the office and part in the workshop. Working with the tube on isn't the best for pumping but it's pumping so better than not doing.


27 jun 18 001.jpg


A little further down the tube yesterday.


27 jun 18 002.jpg
27 jun 18 003.jpg
27 jun 18 005.jpg
27 jun 18 007.jpg
27 jun 18 008.jpg


had to get out at some point, had a couple of errands to run.

End of the night.


27 jun 18 012.jpg
27 jun 18 015.jpg


Oh, and while i was out i got myself some new shorts....


27 jun 18 011.jpg
By Friday chippy lady won't be able to concentrate on wrapping up the dinners.....


Bignlow

Post Reply