Peehole / Urethra Fucking Machine

Body piercing and modification discussion.

Moderator: bigray57

Post Reply
User avatar
costa
Posts: 33
Joined: Fri Aug 17, 2007 5:55 pm

Peehole / Urethra Fucking Machine

Post by costa » Tue May 16, 2017 12:14 am

There are all kinds of fucking machines, but I have not found one for the Peehole and down the Urethra
So I made one.
. and yes it has a speed dial for much faster movement.
This is the first shot from the prototype and the first penetration
Tell me what you think about it.
w1.gif
Peehole / Urethra Fucking Machine
it is a gif file you might need to click on it for the animation

powerfulpete1235
Posts: 1102
Joined: Mon Sep 21, 2009 1:56 am

Re: Peehole / Urethra Fucking Machine

Post by powerfulpete1235 » Tue May 16, 2017 12:55 am

holy fuck thats insane!!!! Awesome job dude!

lellelind
Posts: 48
Joined: Mon Mar 28, 2005 7:30 pm

Re: Peehole / Urethra Fucking Machine

Post by lellelind » Tue May 16, 2017 7:26 am

Nice! I want one like that! :-)

User avatar
tabletop
Posts: 86
Joined: Fri May 16, 2014 8:19 pm

Re: Peehole / Urethra Fucking Machine

Post by tabletop » Tue May 16, 2017 4:41 pm

excellent manufacturing skills there, id buy one for sure.
there is a video of a guy using a traditional sex dildo fucking machine with a stainless steel sound attached out there ive seen somewhere .
i would like to use a long stroke machine on my peehole something like a 6" to 7" stroke.
have fun cheers
tabletop

soundsgreat87
Posts: 203
Joined: Sun Dec 11, 2011 1:19 pm

Re: Peehole / Urethra Fucking Machine

Post by soundsgreat87 » Wed May 17, 2017 12:48 am

Oh that's really hot... how did you build it?

PocketPool
Posts: 129
Joined: Sat Sep 18, 2004 9:58 pm
Location: |USA|FL,Florida

Re: Peehole / Urethra Fucking Machine

Post by PocketPool » Sun May 28, 2017 12:15 am

tabletop wrote:
Tue May 16, 2017 4:41 pm
there is a video of a guy using a traditional sex dildo fucking machine with a stainless steel sound attached out there ive seen somewhere .
i would like to use a long stroke machine on my peehole something like a 6" to 7" stroke.
Here are two of those videos on xtube by FurryFFun:
https://www.xtube.com/video-watch/Cock- ... e-23410781
https://www.xtube.com/video-watch/Fuck- ... g-23416391

I made a similar setup using my F-Machine, but a lot more sturdy, not so jury-rigged, a bit before he posted those two videos (2014). My solution uses a 5/8 inch drill chuck attached to where the vac-u-lock adapter normally goes at the end of the thrust rod. It works quite well, though I haven't used it in a couple of years (life events got in the way). I'll go looking for my setup and take some pictures, give some specs on how to do it and give a further explanation. My solution cost under $50 (mostly the drill chuck) at the time and anyone could do it (no tools required). It might be a bit different on other fucking machine brands.

PocketPool
Posts: 129
Joined: Sat Sep 18, 2004 9:58 pm
Location: |USA|FL,Florida

Re: Peehole / Urethra Fucking Machine

Post by PocketPool » Sat Jun 03, 2017 12:55 am

I finally found my setup for sounding on my fucking machine, but then I broke it (the glue joint failed) and had to fix that. I've got the pictures and explain it now.

What I did was take the vac-u-lock adapter off the thrust rod of the fucking machine (F-Machine brand) and replace it with a 5/8 inch drill chuck to hold various sized sounds. Here is the normal setup of dildo and vac-u-lock adapter:

IMG_4469a.jpg

Vac-u-lock adapter by itself:

IMG_4468a.jpg

It has a hole in it with a M8 metric thread.

I replaced the vac-u-lock adapter with a 5/8 drill chuck which has a 1/2"-20 hole in it for attachment to a drill. So I had to convert that to a M8 metric threaded hole to attach to the end of the thrust rod. To do that, I connected a 1/2"-20 bolt, 1 inch long to a M8 metric "rod extension nut". Preferably these would be (tack) welded together, but I can't weld (if you can get someone to do this for you, do it). So I glued the two pieces together with epoxy glue. I mentioned no tools are required to do this job, but that's not entirely true. The mating ends of the bolt and the nut have to be ground or filed flat for the glue joint to hold. When I fixed it after it separating, I also cut a couple of small grooves in both the bolt and nut mating surfaces to give the glue more grip.

IMG_4467a.jpg

Drill chuck on left. At top right are the bolt and nut not yet glued. At bottom right are the bolt and nut glued together.

Here is a close up of the bolt and nut glued together:

IMG_4483a.jpg

Here is the setup mounted on the fucking machine, with a Dominator Bullet 2 in the drill chuck:

IMG_4479a.jpg

Here is a closeup of three different sounds in the drill chuck:

IMG_4470a.jpg
IMG_4471a.jpg
IMG_4472a.jpg

The sounds from top to bottom are a Dominator Bullet 2 (about 12mm max), a Dominator Bullet 3 (about 16mm max), and a Hegar 15mm/16mm sound with the 16mm side in the drill chuck. 16mm appears to be the maximum for this 5/8" drill chuck. The 17mm end of my Hegar 17mm/18mm sound would not fit.

Here is the box the drill chuck came in:

IMG_4475a.jpg

I checked today and you can get this exact same drill chuck on both e-Bay and Amazon for under $24 including shipping. You could also use a smaller drill chuck, say a 1/2" one if you don't want to go to larger sized sounds. It would be lighter and put less strain on the glue joint (among other things).

Searching e-Bay or Amazon for "drill chuck" and the part number "J3516A" should locate one for you.

You should be able to get the bolt and nut at a hardware store such as a Ace or True Value. The M8 metric rod extension nut would be the most difficult item to find (the drill chuck and the bolt are easy).

Other brand fucking machines might take different sized components, but the general idea would be the same.

I've only used the Dominator Bullet 2 sound so far with this setup and that might be all I ever do. I have larger sounds, but my eyes are bigger than my peehole. I have gotten a 14mm Hegar all the way in, but it was work. Due to other issues in my life, I can't spend as much time sounding as I might like.
Attachments
IMG_4467a.jpg

Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests