forums.newart.com

wantabiggen · Joined: 05 Nov 2007 Posts: 148 Location: australia

i have beaten my previous best of 11" to 12.5". but this came at a cost. the dreaded blisters.
i pumped with 5hg, for 3 hours in the hottest water that i could handle.
took him out of the bullmaster only to find i had blisters on the head of my cock. very sore after i lanced them to release the fluid.
a lesson for anybody contemplating hot water pumping. "dont"
has anybody else had the same problem?
how long before they heal.? i dont want to pump untill they are healed.
luke warm water for me from now on.

F-pumper · Joined: 14 May 2006 Posts: 129 Location: France

I'd pump up to 14" (43 cm) with my jar , 1hr with hot water and 2 hrs dry and no blister !
I think you pump with too high pressure, low the pressure and take more time, its better

ballpumper808 · Joined: 22 Aug 2007 Posts: 205 Location: hawaii

yes i agree. it's not the temp of the water but the pressure. keep it under 5hg. comfort=time=size. rest but then use restraint on pressure. i had a blister on my balls when i went too high. bummers having to rest and heal and not pump. maybe ballstretch the sac using weights or just downward pulling exercises.

tomk · Joined: 03 Apr 2003 Posts: 614

When you use warm or hot water you have to be more careful because it is easier to get blisters when you do so. It makes the skin softer and more pliable..be careful. You need to go at a lower vacuum rate for a longer time to be safe.

WCB · Joined: 13 Sep 2006 Posts: 159 Location: Florida

I love to water pump but only use luke warm and rap a heatin pad just to keep it warm.Never hot water.Never have had a blister, i keep pressure at 4 to 5 never higher for long periods of time. I like wet pumpin cause it seems to keep the brusing to a minimum wen i pump every day. wanabiggen you get bigger everytime you post.

stephan01 · Joined: 19 Jan 2007 Posts: 38

I had blisters too, but who cares - it is fun none the less - as long as they stay closed...

kuddlkat · Joined: 22 Jul 2006 Posts: 12 Location: Baltimore, MD

I got a blister once too a few years ago and stopped pumping for a few weeks. I think it was from too much vacuum, but I'm not sure. Hasn't happened since though and I use warm/hot water every time I pump.

Psychomech · Joined: 21 Jul 2005 Posts: 114 Location: York, PA

It is one of 2 things too High Pressure and/or too hot temprature

megapump · Joined: 08 Oct 2006 Posts: 76

I'm sure blisters are caused by too much vacuum pressure. I had them too, and i realized that pressure should not be over 0,2 bar, best 0,15 bar.
I never pumped with water, so i'm sure that too high pressure it's the problem.

pumpNfuck · Joined: 21 Feb 2007 Posts: 20 Location: california

When I got BListers I put Carmex on them and it speeds up the healing,My dumb ass took two vicodins before I pumped and left it on two long at a high pressure while playing gears of war bad mistake.

wantabiggen · Joined: 05 Nov 2007 Posts: 148 Location: australia

thanks for your input.
i have always pumped at 5hg without any problems, but when i wet pumped with the hottest water i could handle, thats when i got the blisters.
but i will try the suggestions of a lower vacuum.
once again thanks. these forums are full of great advice and wonderful people.

wantabiggen · Joined: 05 Nov 2007 Posts: 148 Location: australia

blisters are now healed and back pumping again.
lower pressure and lowerwater temp.
ive just gotta beat my personal best now.

xstr8guy · Joined: 03 Aug 2004 Posts: 474 Location: Dallas

xstr8guy · Joined: 03 Aug 2004 Posts: 474 Location: Dallas

mRuss · Joined: 25 Jun 2002 Posts: 1299 Location: Guelph Ontario

yeah as you've probably figured out by now it's the very very hot water combined with the pressure that gave you the blisters. Not so hot on the water next time and teh same pressure should not blister you.